Haulotte HA120PX Bedienungsanleitung

Operator's manual

HA120PX

4000327280 E09.16 USA / GB

Operator's manual

HA120PX

2 4000327280 E09.16 USA / GB

HA120PX

CONTENTS

Operator's manual

CONTENTS

FOREWORD

1 - User responsibility ...............................8

1.1 - Owner's responsibility .......................................... 8

1.2 - Employer's responsibility ........................................ 8

1.3 - Trainer's responsibility .......................................... 8

1.4 - Operator's responsibility......................................... 8

2 - Safety ..........................................9

2.1 - Safety instructions.............................................. 9

2.1.1 - Misuse Hazards ......................................9

2.1.2 - Falling Hazards......................................10

2.1.3 - Overturning / Tip-over Hazards .........................11

2.1.4 - Electrocution Hazards.................................14

2.1.5 - Explosion / Fire Hazards...............................15

2.1.6 - Crushing / Collision Hazards ...........................15

2.1.7 - Uncontrolled movement Hazards ........................16

3 - Safety inquiries .................................17

4 - Incident notification .............................17

5 - Compliance ....................................18

5.1 - Product information ...........................................18

5.1.1 - Change of Ownership Notification .......................18

5.1.2 - Owner information update form .........................19

5.2 - Product specifications .........................................20

FAMILIARIZATION

1 - General safety ..................................21

1.1 - Intended use .................................................21

1.2 - Decal content................................................. 22

1.3 - Symbols and colors ...........................................23

1.4 - Level of severity............................................... 23

1.5 - Symbols legend and definitions.................................24

2 - Models description ..............................25

3 - Primary machine components.....................26

3.1 - Layout .......................................................26

3.2 - Ground control box............................................28

3.2.1 - Layout .............................................28

3.3 - Platform control box ...........................................30

3.3.1 - Layout .............................................30

4 - Performance Specifications.......................32

4.1 - Technical characteristics ....................................... 32

4.2 - Working area / Range of motion ................................33

5 - Decals and markings locations HA120PX ...........34

Operator's manual

PRE-OPERATION INSPECTION

1 - Recommendations ..............................39

2 - Working area assessment ........................40

3 - Inspection and Functional test ....................41

3.1 - Daily inspection ...............................................41

4 - Safety functional checks .........................45

4.1 - E-Stop button check ...........................................45

4.2 - Activation of controls ...........................................45

4.3 - Fault detector .................................................46

4.3.1 - Buzzers test ........................................ 46

4.4 - Automatic engine cut-out.......................................46

4.5 - Overload sensing system (if fitted)...............................46

4.6 - Slope warning device ..........................................47

4.7 - Travel speed limitation .........................................48

4.8 - Drive buzzer ..................................................48

OPERATION INSTRUCTIONS

1 - Operation......................................49

1.1 - Introduction ...................................................49

1.2 - Operation from the ground control box...........................49

1.3 - Operation from the platform control box..........................51

2 - Ground control box .............................52

2.1 - To start the machine from the ground control box .................52

2.2 - Boom and arm controls ........................................53

2.3 - Additional controls from the ground control box ...................54

3 - Platform control box.............................55

3.1 - To start and stop the machine ..................................55

3.2 - Drive and steer control .........................................56

3.3 - Boom and arm controls ........................................57

3.4 - Additional controls .............................................58

4 - Emergency procedure ...........................59

4.1 - In case of power loss ..........................................59

4.2 - To rescue operator in platform ..................................60

4.3 - No power available ............................................61

5 - Transportation .................................62

5.1 - Putting in transport position .....................................62

5.2 - Machine layout................................................63

5.3 - Unloading ....................................................64

5.4 - Towing .......................................................65

5.4.1 - Disengaging the drive hubs ............................ 65

5.4.2 - Re-engaging the drive hubs ............................ 65

5.5 - Storage ......................................................66

5.6 - Lifting operation ...............................................67

CONTENTS

Operator's manual

6 - Cold Weather Recommendations ..................68

6.1 - Engine oil ....................................................68

6.2 - Hydraulic oil ..................................................69

6.3 - Preheating operation ..........................................69

GENERAL SPECIFICATIONS

1 - Machine dimensions.............................72

2 - Major component masses ........................73

3 - Acoustics and vibrations .........................73

4 - Wheel/Tire assembly ............................74

4.1 - Technical specifications........................................ 74

4.2 - Inspection and maintenance ...................................74

5 - Options .......................................76

5.1 - On-board generator ...........................................76

5.1.1 - Principle ...........................................76

5.1.2 - Procedure ..........................................76

5.2 - Activ' Shield Bar - SECONDARY GUARDING SYSTEM ........77

5.2.1 - Description .........................................77

5.2.2 - Characteristics ......................................78

5.2.3 - Safety precautions ...................................79

5.2.4 - Pre-operation inspection...............................80

5.2.5 - Operation ..........................................82

5.2.6 - Specific decals ......................................83

MAINTENANCE

1 - General........................................85

2 - Maintenance Schedule ...........................86

3 - Inspection program .............................87

3.1 - General program .............................................87

3.2 - Daily inspection ............................................... 88

3.3 - Periodic inspection ............................................88

3.4 - Reinforced inspection .........................................88

3.5 - Major inspection .............................................. 88

4 - Repairs and adjustments .........................89

OTHER INFORMATION

1 - Warranty disclosure .............................91

1.1 - After Sales Service ............................................91

1.2 - Manufacturer's warranty .......................................91

1.2.1 - Warranty acceptance .................................91

1.2.2 - Warranty period .....................................91

1.2.3 - Procedure conditions .................................91

1.2.4 - Conditions of warranty ................................92

2 - Subsidiary contact information ....................93

Operator's manual

4000327280 E09.16 USA / GB

HA120PX

A- Foreword

Foreword

You have just purchased a HAULOTTE® product and we would like to thank you for your business.

The Aerial Work Platform is a mechanical device primarily designed and manufactured with the intent to position people

with the necessary tools and material to overhead elevated temporary workplaces. All other uses or alterations/modifi-

cations to the aerial work platform must be approved by HAULOTTE®.

This manual shall be considered a permanent component of the machine and shall be kept with the aerial work platform

in the designated Manual Holder, at all times.

Safe operation of this product can only be assured if you follow the operating instructions contained in this manual. To

ensure proper and safe use of this equipment, it is strongly recommended that only trained and authorized personnel

operate and maintain the aerial work platform.

We would particularly like to draw your attention to 2 essential points :

• Comply with safety instructions.

• Use the equipment within the specified/published performance limits.

With regard to the designation of our equipment, we stress that this is purely for commercial purposes and not to be con-

fused with the technical specifications. Only the specifications in this manual should be used to study the suitability of

the equipment for the intended use.

This operator's manual is specific to the HAULOTTE® products listed on the cover page of this manual.

The operator's manual does not replace the basic training required for equipment operators. HAULOTTE® has compiled

this manual to assist in safe and efficient operation of the products covered in the manual.

The manual must be available to all operators and must be kept in a legible condition. Additional copies can be ordered

from HAULOTTE Services®.

Stay Safe and keep working with HAULOTTE® !

Original language and version :

Manuals in English and French are the original instructions. Manuals in other languages are translations

of the original instructions.

8 4000327280 E09.16 USA / GB

HA120PX

A- Foreword

1 - User responsibility

1.1 - OWNER'S RESPONSIBILITY

The owner (or hirer) has the obligation :

• To inform operators of the instructions contained in the Operator's Manual.

• For applying the local regulations regarding operation of the machine.

• To replace all manuals or decals that are either missing or not legible. Additional copies can be

ordered from HAULOTTE Services®.

• To establish a preventive maintenance program in accordance with the manufacturer's

recommendations, taking into account the environment and severity of use of the machine.

• To perform periodic inspections in accordance with HAULOTTE® recommendations and local

regulations.

All malfunctions and problems identified during the inspection shall be corrected before the

aerial work platform is returned to service.

1.2 - EMPLOYER'S RESPONSIBILITY

The employer has the obligation :

• To authorize the operator to use the machine.

• To inform and familiarize the operator with the local regulations.

Forbid anyone from operating the machine if :

• Under the influence of drugs, alcohol, etc.

• Subject to fits, loss of motor skills, dizziness, etc.

1.3 - TRAINER'S RESPONSIBILITY

The trainer must be qualified to provide training to operators in accordance with applicable

local regulations. The training must be given in an obstacle-free area until the trainee is

considered competent as defined by the training program undertaken.

1.4 - OPERATOR'S RESPONSIBILITY

The operator has the obligation to :

• Read and understand the contents of this manual and familiarize himself with the decals affixed on

the machine.

• To inspect the machine before use according to HAULOTTE®'s recommendations..

• To inform the owner (or hirer) if the manual or any decals are missing or are not legible.

• To inform of any malfunctioning of the machine.

The operator shall ensure that frequent inspections were conducted by the owners and the

operator may only operate the machine for the purpose intended by the manufacturer.

Only authorized and qualified operators may operate HAULOTTE® machines.

All operators must become familiar with and fully understand the emergency controls and be

able to operate the machine in an emergency.

The operator has the obligation to stop using the machine in the event of malfunction or safety

problems on the machine or in the work area and report the problem immediately to his/her

supervisor.

4000327280 E09.16 USA / GB

HA120PX

A- Foreword

2 - Safety

2.1 - SAFETY INSTRUCTIONS

2.1.1 - Misuse Hazards

• Do not attach overhanging loads when raising or lowering the platform.

• Do not tie the boom or platform to an adjacent fixed or mobile structure.

• Do not use/operate the machine when alone. A survey person or immediate Supervisor must be

present on the ground in case of emergency.

• Do not use a faulty or poorly maintained machine. Remove defective/damaged machine from service.

• Do not climb onto the compartment covers of the machine.

• Do not replace items critical to machine stability with items of different weight or specification.

• Do not replace factory-installed tires with tires of different specifications or ply rating.

• Do not alter or disable machine components that in any way affect safety and stability.

• Do not disable the safety devices.

• Do not use the machine for any other purpose than to position people,

their tools and material to the overhead/elevated temporary work places.

• Do not use the machine as a crane, material lift or elevator. Only use

the machine as it was intended.

10 4000327280 E09.16 USA / GB

HA120PX

A- Foreword

2.1.2 - Falling Hazards

To enter or exit from the platform :

• The machine must be completely stowed.

• Face the machine to access the entry opening to the platform.

• Keep 3 points of contact (both hands and a foot) on the steps and the

guardrail.

Before commencing operation :

• Ensure that guard rails are correctly installed and secured.

• Ensure that gate or sliding bar is in it’s proper closed position.

• Remove oil or grease from the steps, floor, handrail and the guardrails.

• Clear the platform floor free of debris.

When in the platform :

• Occupants must wear a fall arrest harness with lanyard and energy

absorber, in accordance with applicable governmental regulations.

Attach the lanyard to the designated fall arrest anchor provided in the

platform.

• The correct use of the harness requires the lanyard to be connected to

an anchorage point designated by the decals. Refer to this decal located

on the platform.

• Hold on securely to the guardrails.

• Always keep your feet firmly on the floor of the platform.

• Do not sit, stand, or climb on the platform guard rails.

• Work only within the platform guardrails area and do not lean over

guardrails to perform work.

• Do not exit the platform until it is in the completely stowed position.

• Do not use the guardrail as a means of access to climb in or out of the

platform.

307P216290 b

x 1

Inhaltsverzeichnis

Andere Haulotte Hubarbeitsbühne Handbücher

Haulotte

Haulotte HTL 4010 Bedienungsanleitung

Haulotte

Haulotte SUMMIT Series Bedienungsanleitung

Haulotte

Haulotte SUMMIT Series Kurzanleitung

Haulotte

Haulotte 3522A Bedienungsanleitung

Haulotte

Haulotte HT43RTJ PRO Produkthandbuch

Haulotte

Haulotte HA12IP Bedienungsanleitung

Haulotte

Haulotte STAR 8 Produkthandbuch

Haulotte

Haulotte OPTIMUM 1931 E Bedienungsanleitung

Haulotte

Haulotte HA20RTJ O Bedienungsanleitung

Haulotte

Haulotte 4527A Installationsanleitung

Haulotte

Haulotte HTT13 Bedienungsanleitung

Haulotte

Haulotte SUMMIT Series Bedienungsanleitung

Haulotte

Haulotte SUMMIT Series Bedienungsanleitung

Haulotte

Haulotte 4527A Bedienungsanleitung

Haulotte

Haulotte HA16RTJ Bedienungsanleitung

Haulotte

Haulotte HA32RTJ PRO Produkthandbuch

Haulotte

Haulotte HA41PX-NT Installationsanleitung

Haulotte

Haulotte HA20RTJ O Bedienungsanleitung

Haulotte

Haulotte HA32PX Bedienungsanleitung

Haulotte

Haulotte 3522A Bedienungsanleitung

Haulotte

Haulotte 45XA Bedienungsanleitung

Haulotte

Haulotte STAR 6 Bedienungsanleitung

Haulotte

Haulotte HA16RTJ Bedienungsanleitung

Haulotte

Haulotte Compact 10DX Bedienungsanleitung

Beliebte Hubarbeitsbühne Handbücher anderer Marken

Genie

Genie Z-80 Bedienungsanleitung

Genie

Genie Z-45/25 Bedienungsanleitung

JLG

JLG Skytrak 6036 Gebrauchs- und Pflegehandbuch

Terex

Terex Z80H-7733 Bedienungsanleitung

Terex

Terex Gyro 4020 Bedienungsanleitung

Terex

Terex Genie Z-51/30 J Bedienungsanleitung

LGMG

LGMG T65JE Bedienungsanleitung

Genie

Genie Z-135/70 Bedienungsanleitung

Oshkosh Corporation

Oshkosh Corporation JLG H800AJ Gebrauchs- und Pflegehandbuch

Oshkosh

Oshkosh JLG 1500SJ Installations- und Benutzerhandbuch

Skyjack

Skyjack SJ30AJE Bedienungsanleitung

Oshkosh

Oshkosh JLG 800A Installations- und Benutzerhandbuch

Terex

Terex Genie Z-135/70 Bedienungsanleitung

Skyjack

Skyjack SJ 46AJ Bedienungsanleitung

Molift

Molift Quick Raiser 205 Bedienungsanleitung

Snorkel

Snorkel SL26RTE Kurzanleitung

Terex

Terex Genie Z-135/70 Installations- und Betriebsanleitung

Terex

Terex Genie ZX-135/70 Installations- und Betriebsanleitung