HBM Z6/M Bedienungsanleitung
Mounting Instructions | Montageanleitung |
Notice de montage
English Deutsch Français
Z6/M
Hottinger Baldwin Messtechnik GmbH
Im Tiefen See 45
D-64239 Darmstadt
Tel. +49 6151 803-0
Fax +49 6151 803-9100
www.hbm.com
Mat.: 7-2001.6001
DVS: A1063-6.0 HBM: public
05.2017
EHottinger Baldwin Messtechnik GmbH.
Subject to modifications.
All product descriptions are for general information only.
They are not to be understood as a guarantee of quality or
durability.
Änderungen vorbehalten.
Alle Angaben beschreiben unsere Produkte in allgemeiner
Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits
garantie dar.
Sous réserve de modifications.
Les caractéristiques indiquées ne décrivent nos produits
que sous une forme générale. Elles n'impliquent aucune
garantie de qualité ou de durabilité.
Mounting Instructions | Montageanleitung |
Notice de montage
English Deutsch Français
Z6/M
2A1063-6.0 HBM: public Z6/M
English
1 Safety instructions 3........................................
2 Markings used 6............................................
2.1 The markings used in this document 6..........................
2.2 Symbols on the product 7.....................................
3 General 8..................................................
4 Prior to mounting 9.........................................
5 Mounting 10.................................................
6 Operation 12................................................
7 Mounting examples for weigh. modules with stay rods 13.....
8 Connection 14...............................................
8.1 Connecting several weighing modules in parallel 15...............
8.2 Connection using four‐wire circuitry 15...........................
8.3 Cable extensions 16..........................................
9 Dimensions 17..............................................
10 Specifications for the Z6/M... weighing module 18.............
11 Specifications for the Z6... load cells 19.......................
Safety instructions
Z6/M A1063-6.0 HBM: public 3
1 Safety instructions
In cases where a breakage would cause injury to persons
or damage to equipment, the user must take appropriate
safety measures (such as fall protection, overload protec
tion, etc.). For safe and trouble‐free operation, weighing
modules must not only be correctly transported, stored,
sited and installed but must also be carefully operated
and maintained.
It is essential to comply with the relevant accident pre
vention regulations. In particular you should take into ac
count the limit loads quoted in the specifications.
Use in accordance with the regulations
Z6/M... type weighing modules are conceived for
weighing applications. Use for any additional purpose
shall be deemed to be not in accordance with the
regulations.
In the interests of safety, the weighing modules should
only be operated as described in the Mounting
Instructions. It is also essential to observe the
appropriate legal and safety regulations for the
application concerned during use. The same applies to
the use of accessories.
The weighing modules are not safety elements within the
meaning of its use as intended. Proper and safe
operation of this transducer requires proper
transportation, correct storage, assembly and mounting
and careful operation and maintenance.
Safety instructions
4A1063-6.0 HBM: public Z6/M
General dangers due to non‐observance of the
safety instructions
The Z6/M... weighing modules correspond to the state of
the art and are fail‐safe. The tank weiginh modules can
give rise to residual dangers if they are inappropriately
installed and operated by untrained personnel.
Everyone involved with the installation, commissioning,
maintenance or repair of a force transducer must have
read and understood the Mounting Instructions and in
particular the technical safety instructions.
Residual dangers
The scope of supply and performance of the weighing
modules covers only a small area of weighing
technology. In addition, equipment planners, installers
and operators should plan, implement and respond to the
safety engineering considerations of weighing technology
in such a way as to minimise residual dangers. Prevailing
regulations must be complied with at all times. There
must be reference to the residual dangers connected
with weighing technology.
Environmental conditions
In the context of your application, please note that all ma
terials which release chlorine ions will attack all grades of
stainless steel and their welding seams. In such cases
the operator must take appropriate safety measures.
Prohibition of own conversions and modifications
The weighing modules must not be modified from the
design or safety engineering point of view except with our
express agreement. Any modification shall exclude all
liability on our part for any damage resulting therefrom.
Safety instructions
Z6/M A1063-6.0 HBM: public 5
Qualified personnel
These weighing modules are only to be installed by
qualified personnel strictly in accordance with the
technical data and with the safety rules and regulations
which follow. It is also essential to observe the
appropriate legal and safety regulations for the
application concerned. The same applies to the use of
accessories.
Qualified personnel means persons entrusted with the
installation, fitting, commissioning and operation of the
product who possess the appropriate qualifications for
their function.
Accident prevention
Although the specified nominal capacity in the destructive
range is several times the full scale value, the relevant
accident prevention regulations from the trade
associations must be taken into consideration.
Markings used
6A1063-6.0 HBM: public Z6/M
2 Markings used
2.1 The markings used in this document
Important instructions for your safety are specifically
identified. It is essential to follow these instructions in
order to prevent accidents and damage to property.
Symbol Significance
CAUTION This marking warns of a potentially dangerous
situation in which failure to comply with safety
requirements can result in slight or moderate physical
injury.
Notice This marking draws your attention to a situation in
which failure to comply with safety requirements can
lead to damage to property.
Important
This marking draws your attention to important
information about the product or about handling the
product.
Tip
This marking indicates application tips or other
information that is useful to you.
Information
This marking draws your attention to information
about the product or about handling the product.
Emphasis
See….
Italics are used to emphasize and highlight text and
references to other chapters and external documents.
General
8A1063-6.0 HBM: public Z6/M
3 General
HBM supplies Z6/M... weighing modules for max. capaci
ties from 30 kg to 200 kg and 500 kg. The weighing mod
ules are designed mainly for use in tank weighing ap
plications.
These weighing modules are fitted with lateral stay rods.
An integral over‐load stop is also fitted.
The modules consist of a base plate, the load cell
complete with load application elements, and the cover
plate. A pendulum support is used for the load applica
tion, providing compensation for horizontal load shifts
(such as may occur as a result of thermal strain, for
example). The weighing modules are pre‐assembled and
a grounding cable is supplied.
Inhaltsverzeichnis
Sprachen:
Andere HBM Messgerät Handbücher
HBM
HBM MP85ADP Bedienungsanleitung
HBM
HBM KMR Bedienungsanleitung
HBM
HBM SomatXR CX23-R Bedienungsanleitung
HBM
HBM MC3 Bedienungsanleitung
HBM
HBM T40S7 Bedienungsanleitung
HBM
HBM ME250 S6 Bedienungsanleitung
HBM
HBM ME30 Bedienungsanleitung
HBM
HBM HBK U93 Bedienungsanleitung
HBM
HBM T10FH Bedienungsanleitung
HBM
HBM DMP41 Bedienungsanleitung
HBM
HBM KDB Bedienungsanleitung
HBM
HBM TTS Bedienungsanleitung
HBM
HBM PMX Bedienungsanleitung
HBM
HBM T10F KF1 Bedienungsanleitung
HBM
HBM MVD2555 Bedienungsanleitung
HBM
HBM FS42 Bedienungsanleitung
HBM
HBM RTN/M2 Series Bedienungsanleitung
HBM
HBM CFT Bedienungsanleitung
HBM
HBM BU18 Bedienungsanleitung
HBM
HBM WA Series Bedienungsanleitung
