HBM TB1A Bedienungsanleitung

Mounting Instructions | Montageanleitung |

Notice de montage

English Deutsch Français

TB1A

Hottinger Baldwin Messtechnik GmbH

Im Tiefen See 45

D-64239 Darmstadt

Tel. +49 6151 803-0

Fax +49 6151 803-9100

[email protected]

www.hbm.com

Mat.: 7-2001.1000

DVS: A0162-8.0 HBM: public

04.2015

EHottinger Baldwin Messtechnik GmbH.

Subject to modifications.

All product descriptions are for general information only.

They are not to be understood as a guarantee of quality or

durability.

Änderungen vorbehalten.

Alle Angaben beschreiben unsere Produkte in allgemeiner

Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits

garantie dar.

Sous réserve de modifications.

Les caractéristiques indiquées ne décrivent nos produits

que sous une forme générale. Elles n'impliquent aucune

garantie de qualité ou de durablilité.

Mounting Instructions | Montageanleitung |

Notice de montage

English Deutsch Français

TB1A

2A0162-8.0 HBM: public TB1A

English

1 Safety instructions 3........................................

1.1 The markings used in this document 6..........................

1.2 Symbols on the product 7.....................................

2 Scope of supply 8..........................................

3 Application 9...............................................

4 Structure and mode of operation 10...........................

4.1 Mechanical structure 10.......................................

5 Mounting 11.................................................

5.1 General installation notes 11...................................

5.2 Mounting position 15..........................................

5.3 Conditions on site 15..........................................

5.4 Mechanical installation 15......................................

5.5 Loading capacity 23...........................................

6 Electrical connection 25......................................

6.1 Notes for cabling 26...........................................

6.2 Four‐wire technique 27........................................

7 Maintenance 28..............................................

8 Accessories 28..............................................

9 Specifications 29............................................

10 Dimensions 33..............................................

Safety instructions

TB1A A0162-8.0 HBM: public 3

1 Safety instructions

Use in accordance with the regulations

Reference torque measuring‐discs TB1A are used

exclusively for torque measurement tasks and control

and adjustment tasks directly connected thereto. Use for

any additional purpose shall be deemed to be not in

accordance with the regulations.

In the interests of safety, the transducer should only be

operated as described in the Mounting Instructions. It is

also essential to observe the appropriate legal and safety

regulations for the application concerned during use. The

same applies to the use of accessories.

The transducer is not a safety element within the mean

ing of its use as intended. Proper and safe operation of

this transducer requires proper transportation, correct

storage, assembly and mounting and careful operation.

General dangers of failing to follow the safety

instructions

The transducer corresponds to the state of the art and is

fail‐safe. The transducer can give rise to remaining

dangers if it is inappropriately installed and operated by

untrained personnel.

Everyone involved with the installation, commissioning,

maintenance or repair of the transducer must have read

and understood the Operating Manual and in particular

the technical safety instructions.

Remaining dangers

The scope of supply and performance of the transducer

covers only a small area of torque measurement

technique. In addition, equipment planners, installers and

Safety instructions

4A0162-8.0 HBM: public TB1A

operators should plan, implement and respond to the

safety engineering considerations of torque

measurement technique in such a way as to minimize

remaining dangers. Prevailing regulations must be

complied with at all times. Reference must be made to

remaining dangers connected with torque measurement

technology.

Conversions and modifications

The transducer must not be modified from the design or

safety engineering point of view except with our express

agreement. Any modification shall exclude all liability on

our part for any damage resulting therefrom.

Qualified personnel

Qualified personnel means persons entrusted with the

installation, fitting, commissioning and operation of the

product who possess the appropriate qualifications for

their function.

The transducer must only to be installed and used by

qualified personnel, strictly in accordance with the specifi

cations and with safety requirements and regulations. It

is also essential to observe the appropriate legal and

safety regulations for the application concerned during

use. The same applies to the use of accessories.

Prevention of accidents

According to prevailing accident prevention regulations, it

is essential that after mounting the transducers the user

fits a cover or enclosure as follows:

SThe cover or enclosure must not be able rotate.

Safety instructions

TB1A A0162-8.0 HBM: public 5

SThe cover or enclosure shall protect against crushing

or cutting and provide protection against parts that

might come loose.

SThe covers and enclosures shall be installed at a safe

distance from moving parts or shall prevent anyone

putting their hand inside.

SThe covers and enclosures shall even be fitted if the

moving parts are installed in areas to which persons

do not usually have access.

The above regulations may only be diverged from, if

machine parts are already sufficiently protected owing to

the design of the machine or because other precautions

have been taken.

Safety instructions

6A0162-8.0 HBM: public TB1A

1.1 The markings used in this document

Important instructions for your safety are specifically

identified. It is essential to follow these instructions in

order to prevent accidents and damage to property.

Symbol Significance

WARNING This marking warns of a potentially dangerous

situation in which failure to comply with safety

requirements can result in death or serious physical

injury.

CAUTION This marking warns of a potentially dangerous

situation in which failure to comply with safety

requirements can result in slight or moderate physical

injury.

Notice This marking draws your attention to a situation in

which failure to comply with safety requirements can

lead to damage to property.

Important

This marking draws your attention to important

information about the product or about handling the

product.

Tip

This marking indicates application tips or other

information that is useful to you.

Information

This marking draws your attention to information

about the product or about handling the product.

Emphasis

See….

Italics are used to emphasize and highlight text and

references to other chapters and external documents.

Safety instructions

TB1A A0162-8.0 HBM: public 7

1.2 Symbols on the product

CE mark

The CE mark enables the manufacturer to guarantee that

the product complies with the requirements of the rele

vant EC directives (the declaration of conformity is avail

able at http://www.hbm.com/HBMdoc).

Statutory marking requirements for waste disposal

National and local regulations regarding the protection of

the environment and recycling of raw materials require

old equipment to be separated from regular domestic

waste for disposal.

For more detailed information on disposal, please contact

the local authorities or the dealer from whom you pur

chased the product.

Scope of supply

8A0162-8.0 HBM: public TB1A

2 Scope of supply

The scope of supply includes the following:

1 Reference torque measuring‐disc

1 Mounting Instructions

1 Test record

Andere Handbücher für TB1A

Inhaltsverzeichnis

Sprachen:

Beliebte Wandler Handbücher anderer Marken

Camille Bauer

Camille Bauer SINEAX F534 Bedienungsanleitung

Trane

Trane KIT 16724 Montageanleitung

Lumel

Lumel P18 Bedienungsanleitung

B&C Speakers

B&C Speakers DE75PTN Bedienungsanleitung

MAMAC SYSTEMS

MAMAC SYSTEMS PR-243 Handbuch

Mianyang Weibo Electronic

Mianyang Weibo Electronic WB Series Bedienungsanleitung

ProMinent

ProMinent Dulcometer DMT Bedienungsanleitung

MKS

MKS MicroPirani 925 Series Anleitung zur Verwendung

WIKA

WIKA WU-20 Bedienungsanleitung

Alcatel Vacuum Technology

Alcatel Vacuum Technology BARATRON 622A Bedienungsanleitung

Camille Bauer

Camille Bauer SIRAX CH-5610 Bedienungsanleitung

WIKA

WIKA F2802 Bedienungsanleitung

Veris Industries

Veris Industries PW Series Bedienungsanleitung

Simrad

Simrad ES120-7C - REV D Benutzerhandbuch

Airmar

Airmar M260 Bedienungsanleitung

Spirax Sarco

Spirax Sarco ITV1030 Bedienungsanleitung

halstrup-walcher

halstrup-walcher PU10 Bedienungsanleitung

Balluff

Balluff BTL5-P Bedienungsanleitung