Heat & Glo 6000TRS-CE Montageanleitung

- Do not store or use petrol or other flam-

mable vapors and liquids in the vicinity of

this or any other appliance.

-What to do if you smell gas

• Do not try to light any appliance.

• Do not touch any electrical switch.

• Do not use any phone in your building.

• Immediately call your gas supplier from

a neighbor's phone. Follow the gas

supplier’s instructions

• If you cannot reach your gas supplier,

call the fire department.

- Installation and service must be performed

by a qualified installer or competent

person.

Model:

6000TRS-CE Installers Guide

WARNING: IMPROPER INSTALLATION,

ADJUSTMENT, ALTERATION, SERVICE

OR MAINTENANCE CAN CAUSE INJURY

OR PROPERTY DAMAGE. REFER TO

THIS MANUAL. FOR ASSISTANCE OR

ADDITIONAL INFORMATION CONSULT A

QUALIFIED INSTALLER OR

COMPETENT PERSON.

2049-900H 10/06

READ THIS MANUAL BEFORE INSTALLING OR

OPERATING THIS APPLIANCE. THIS INSTALLERS

GUIDE MUST BE LEFT WITH APPLIANCE FOR

FUTUREREFERENCE.

Please contact your Heat & Glo dealer with any

questionsorconcerns. Forthenumberofyournearest

Heat & Glo dealer, please visitwww.heatnglo.com.

Heat & Glo, a brand of Hearth & Home Technologies Inc.

20802KensingtonBlvd., Lakeville, MN 55044, USA

These instructions are only valid if the

following country symbol is on the appliance.

If this symbol is not present on the appliance,

it is necessary to refer to the technical

instructions which will provide the necessary

information concerning the modification of the

appliance to the conditions of use for the

country.

0087

These instructions are valid for the following

countries: GB, IE

WARNING:

IF THE INFORMATION IN THESE

INSTRUCTIONS IS NOT

FOLLOWED EXACTLY,A FIRE OR

EXPLOSION MAY RESULT

CAUSING PROPERTY DAMAGE,

PERSONAL INJURY, OR DEATH.

This product is covered by one or more of the following patents: (United States) 4,112,913; 4,408,594; 4,422,426; 4,424,792; 4,520,791; 4,793,322;

4,852,548; 4,875,464; 5,000,162; 5,016,609; 5,076,254 5,191,877; 5,218,953; 5,328,356; 5,429,495; 5,452,708; 5,542,407; 5,613,487; (Australia)

543790; 586383; (Canada) 1,123,296; 1,297,746; 2,195,264; (Mexico) 97-0457; (New Zealand) 200265; or other U.S. and foreign patents pending.

SAFETY AND WARNING INFORMATION

READ and UNDERSTAND all instructions carefully before starting the installation.

FAILURE TO FOLLOW these installation instructions may result in a possible fire

hazard and will void the warranty.

Prior to the first firing of the fireplace, READ the Using Your Fireplace section of the

Users Guide.

DO NOT USE this appliance if any part has been under water. Immediately CALL a

qualified service technician to inspect the unit and to replace any part of the control

system and any gas control which has been under water.

THIS UNIT IS NOT FOR USE WITH SOLID FUEL.

Installation and repair should be PERFORMED by a qualified service person. The

appliance and flue system should be INSPECTED before initial use and at least

annually by a professional service person.

Always KEEP the appliance clear and free from combustible materials, petrol, and

other flammable vapors and liquids.

NEVER OBSTRUCT the flow of combustion and ventilation air. Keep the front of the

appliance CLEAR of all obstacles and materials for servicing and proper operations.

Due to the high temperature, the appliance should be LOCATED out of traffic areas

and away from furniture and draperies. Clothing or flammable material SHOULD NOT

BE PLACED on or near the appliance.

Children and adults should be ALERTED to the hazards of high surface temperature

and should STAY AWAY to avoid burns or clothing ignition. Young children should be

CAREFULLY SUPERVISED when they are in the same room as the appliance.

These units MUST use one of the fluing systems described in the Installing the Fireplace

section of the Installers Guide. NO OTHER flue systems or components MAY BE USED.

This gas appliance and flue assembly MUST be vented directly to the outside and

MUST NEVER be attached to a chimney serving a separate solid fuel burning

appliance. Each gas appliance MUST USE a separate flue system. Common flue

systems are PROHIBITED.

INSPECT the external terminal cap on a regular basis to make sure that no debris is

interfering with the air flow.

The glass door assembly MUST be in place and sealed, and the trim door assembly

MUST be in place on the appliance before the unit can be placed into safe operation.

DO NOT OPERATE this appliance with the glass door removed, cracked, or broken.

Replacement of the glass door should be performed by a licensed or qualified service

person. DO NOT strike or slam the glass door.

The glass door assembly SHALL ONLY be replaced as a complete unit, as supplied

by the gas appliance manufacturer. NO SUBSTITUTE material may be used.

DO NOT USE abrasive cleaners on the glass door assembly. DO NOT ATTEMPT to

clean the glass door when it is hot.

Turn off the gas before servicing this appliance. It is recommended that a qualified

service technician perform an appliance check-up at the beginning of each heating

season.

Any safety screen or guard removed for servicing must be replaced before operating

this appliance.

This appliance is intended for use on a gas installation with a governed meter.

Table of

Contents

Safety and Warning Information .................................. 2

Service Parts List ......................................................... 4

Section 1: Approvals and Regulations ....................... 7

ApplianceCertification ................................................ 7

InstallationRegulations ............................................... 7

Section 2: Getting Started ........................................... 8

Introducing the Heat & Glo Gas Fireplaces................. 8

Pre-installationPreparation......................................... 8

Section 3: Installing the Fireplace ............................ 10

Step 1 Locating the Fireplace ................................. 10

Step 2 Framing the Fireplace ..................................11

Step 3 Installing the Flue System ........................... 12

A. Flue SystemApprovals ........................... 12

B. Installing Flue Components..................... 20

C. Flue Termination ..................................... 24

Step 4 Positioning, Levelingand

Securing the Fireplace ................................ 29

Step 5 The Gas Control Systems........................... 29

Step 6 The Gas Supply Line ................................... 30

Step 7 Gas Pressure Requirements ...................... 31

Step 8 Wiring the Fireplace .................................... 31

Step 9 Finishing ...................................................... 32

Step 10

Installing Trim, Logs & Ember Material.........

Installing the Trim ........................................ 33

Positioning the Logs .................................... 34

Placing the Ember Material ......................... 36

Step 11 Before Lighting the Fireplace....................... 37

Step 12 Lighting the Fireplace .................................. 37

Afterthe Installation ..................................... 37

Section 4: Maintaining and Servicing

Your Fireplace .......................................... 38

Section 5: Troubleshooting ....................................... 40

Î= Containsupdatedinformation.

*Partnumber list on followingpage.

9 Log SetAssembly

(NG, LP) Exploded Parts Diagram

Service Parts 6000TRS-CE

Beginning Manufacturing Date: 1/04

Ending Manufacturing Date: ______

11 12

13 14

20 17

ITEM PARTS SERIAL # PART NUMBER

1 Junction Box 546-250A

2 Burner NG 2049-010

3 Glass Door Assembly GLA-6TRXI

4 Log Grate 2049-020

5 Base Refractory 2049-102

6 Hood SRV60-143-BK

7 Door Assembly 392-180A

8 Top Louver Assembly 392-182A

9 Log Set Assembly LOGS-6TRSCE

10 Log 1 SRV2049-700

11 Log 2 SRV2049-701

12 Log 3 SRV385-723

13 Log 4 SRV385-721

14 Log 5 SRV385-722

15 Surround 2026-108

Refractory Kit BRICK-6000-FB

16 Back Wall Refractory SRV2027-730

17 Left Wall Refractory SRV2027-731

18 Right Wall Refractory SRV2027-732

19 Insulation Board 385-401

20 Exhaust Baffle 2049-101

Flue Gasket 2025-114

Pilot Orifice NG 529-512

Insulation Mineral Wool 050-721

ACCESSORIES

Extended Vertical Baffle Kit BAF-VERT

Wall Switch Kit, Off-white WSK-21

Wall Switch Kit, White WSK-21-W

Conversion Kit NG NGK-6TRS-CE

Conversion Kit LP LPK-6TRS-CE

Conversion Kit Butane BGK-6TRS-CE

(NG) Service Parts List

IMPORTANT: THIS IS DATED INFORMATION. The most current information is located on your dealers VIP site. When

ordering,supply serialandmodelnumbers to ensurecorrectservice parts.

6000TRS-CE

Alsoseefollowingpagefor Standing Pilot valve assembly service partnumbers.

(NG) Exploded Parts Diagram

Service Parts 6000TRS-CE

Beginning Manufacturing Date: 1-04

Ending Manufacturing Date: ______

Standing Pilot

ValveAssembly

10 11 12

ITEM DESCRIPTION SERIAL # PART NUMBER

1PilotAssemblyNG 529-540A

2 Pilot Bracket 2049-105

3 Orifice NG (#33) 582-833

4 30.5 cm Flex 383-302A

5 Burner Neck Gasket 438-407

6 Valve Plate Gasket 385-402

7 Valve Bracket 2049-108

8 Flex Assembly 302-330A

9WireAssembly 049-552A

10 ON/Off Rocker Switch 060-521A

11 Piezo Ignitor 219-513

12 Control Panel 2049-109

13 S.I.T. Valve NG 060-524

Appliance Certification

The Heat & Glo fireplace models discussed in this

Installers Guide have been tested to certification

standards and listed by the applicable laboratories.

CERTIFICATION

MODEL LABORATORY TYPE STANDARD

6000TRS-CE

Advantica Gas Fireplace 90/396/EEC

Installation Regulations

Before installation check that local distribution conditions, nature of gas and

pressure, and adjustment of the appliance are compatible.

This appliance must be installed with the rules in force, and used only in a

sufficiently ventilated space. Consult instructions before installation and use of

this appliance.

Approvals

and

Regulations

Heat & Glo direct flue gas fireplaces are designed to

operate with all combustion air siphoned from outside

of the building and all exhaust gases expelled to the

outside.

The information contained in this Installers Guide,

unless noted otherwise, applies to all models and gas

control systems.

Gas fireplace diagrams, including the dimensions, are

shown in this section.

This gas fireplace and its components are tested and

safe when installed in accordance with this Installers

Guide. Report to your dealer any parts damaged in

shipment, particularly the condition of the glass. Do

not install any unit with damaged, incomplete, or

substitute parts.

The flue system components and trim doors are

shipped in separate packages. The gas logs are

packaged separately and must be field installed.

Read all of the instructions before starting the

installation. Follow these instructions carefully

during the installation to ensure maximum safety

and benefit. Failure to follow these instructions

will void the owner’s warranty and may present a

fire hazard.

The Heat & Glo Fireplace Products, Inc. Warranty will

be voided by, and Heat & Glo Fireplace Products, Inc.

disclaims any responsibility for, the following actions:

• Installation of any damaged fireplace or flue system

component.

• Modification of the fireplace or direct flue system.

• Installation other than as instructed by Heat & Glo

Fireplace Products, Inc.

• Improper positioning of the gas logs or the glass

door.

• Installation and/or use of any component part not

manufactured and approved by Heat & Glo Fire-

place Products, Inc., not withstanding any indepen-

dent testing laboratory or other party approval of

such component part or accessory.

ANY SUCH ACTION MAY POSSIBLY CAUSE A

FIRE HAZARD.

Introducing the

Heat & Glo

Gas Fireplaces

Pre-installation

Preparation

Getting

Started

Figure 1. Diagram of the 6000TRS-CE

RATING PLATE/LABELS

GAS

ACCESS

GAS

CONTROLS ELECTRICAL

ACCESS

VENT

COLLARS

TOP STANDOFFS

HOOD

CERAMIC

FIBER PAD

When planning a fireplace installation, it’s necessary to determine:

•Where the unit is to be installed.

•The flue system configuration to be used.

•Gas supply piping.

•Electrical wiring.

•Framing and finishing details.

•Whether optional accessories—devices such as a fan, wall switch, or

remote control—are desired.

If the fireplace is to be installed on carpeting or tile, or on any combustible

material other than wood flooring, the fireplace should be installed on a metal

or wood panel that extends the full width and depth of the fireplace.

28-3/8”

(72.1 cm)

14-1/4”

(36.2 cm)

21”

(53.3 cm)

Ø8”

(20.3 cm)

21-1/2”

(54.7 cm)

11-5/8”

(29.7 cm)

36-1/8”

(91.8 cm) 18-3/4”

(47.6 cm)

2-1/2”

(6.4 cm)

31-5/8”

(80.3 cm)

41”

(104.1 cm)

38”

(96.5 cm)

ELECTRICAL

ACCESS

5”

(12.7 cm)

GAS LINE

ACCESS 6-7/8”

(17.5 cm)

2-3/8”

(6.0 cm)

27”

(68.6 cm)

41-7/8”

(106.4 cm)

Ø8”

(20.3 cm)

AB CDE

106.6cm 55.9cm 100.3cm 143.5cm 203.2cm

Figure 2. Fireplace Dimensions, Locations, and

Space Requirements

1”MIN. (2.54cmm)

20”

(50.8cm)

Installing the

Fireplace

The diagram below shows space and clearance

requirements for locating a fireplace within a room.

Step 1

Locating the

Fireplace

NOTE:

Dimensions are

shown with the

sides, back

and/or corners

of the unit

touching the wall.

Clearance Requirements

The top and back of the fireplace are defined by

stand-offs.

The minimum clearance to a perpendicular wall

extending past the face ofthe fireplace is 7.62cm.

The back of the fireplaces may be recessed into

combustible construction (see Figure 3).

MODEL: 6000TRS-CE RECESSED DEPTH: 54.6cm

Minimum Clearances from the Fireplace to Combustible Materials

Glass

Front Floor Back of

Fireplace Sides of

Fireplace Top of

Fireplace Ceiling

91.4cm 0 1.3cm 1.3cm 8.9cm 79cm

Figure 3. Minimum Clearances

Minimum Clearances from the Flue Pipe to Combustible Materials

For Horizontal Sections For Vertical

Sections At Wall Firestops

Top Bottom Sides Top Bottom Sides

7.6cm 2.54 cm 2.54 cm 2.54 cm 6.4 cm 1.3 cm 2.54 cm

Andere Handbücher für 6000TRS-CE

Inhaltsverzeichnis

Andere Heat & Glo Kamin im Innenbereich Handbücher

Heat & Glo

Heat & Glo Tiara Petite Montageanleitung

Heat & Glo

Heat & Glo 6000CLX-IFT-S Bedienungsanleitung

Heat & Glo

Heat & Glo FDN-5-PIER Bedienungsanleitung

Heat & Glo

Heat & Glo CERONA-36 Bedienungsanleitung

Heat & Glo

Heat & Glo SL-550TR-D Bedienungsanleitung

Heat & Glo

Heat & Glo SOLARIS36-ST Bedienungsanleitung

Heat & Glo

Heat & Glo RUTHERFORD-50 Bedienungsanleitung

Heat & Glo

Heat & Glo PRIMO48-CF Bedienungsanleitung

Heat & Glo

Heat & Glo EXCLAIM-50 Bedienungsanleitung

Heat & Glo

Heat & Glo EM-415 Bedienungsanleitung

Heat & Glo

Heat & Glo ST-550TM-IPI Leitfaden

Heat & Glo

Heat & Glo 6000C-IPILP Bedienungsanleitung

Heat & Glo

Heat & Glo TIARAP-AL Bedienungsanleitung

Heat & Glo

Heat & Glo Escape-36DV Bedienungsanleitung

Heat & Glo

Heat & Glo 6000TRSI-AUC Bedienungsanleitung

Heat & Glo

Heat & Glo SOULSTICE-LP Bedienungsanleitung

Heat & Glo

Heat & Glo SL-550BE-M-IPI Bedienungsanleitung

Heat & Glo

Heat & Glo PALOMA-BZ-MOD Bedienungsanleitung

Heat & Glo

Heat & Glo ST-550TM-IPI Bedienungsanleitung

Heat & Glo

Heat & Glo Heat & Glo XLR-PLUS-N-AU Bedienungsanleitung

Heat & Glo

Heat & Glo Northstar-C Bedienungsanleitung

Heat & Glo

Heat & Glo 8000TRC Montageanleitung

Heat & Glo

Heat & Glo CERONA-36 Bedienungsanleitung

Heat & Glo

Heat & Glo Paloma Bedienungsanleitung

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Enviro

Enviro E33GI Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Miles Industries

Miles Industries Vogue 1300IRN Handbuch