Heli-Max AXE100CP Bedienungsanleitung

, Inc. HMXE0820 HMXE0821

NOTICE

Instruction Manual

The instruction manual, warranties and other associated documentation are subject

to change without notice. Hobbico assumes no responsibility for inadvertent errors

in this manual.

Heli-Max products are to be used by ages 14 and over.

™

INTRODUCTION

Thank you for purchasing the Heli-Max AXE 100 CP Helicopter. We are certain

you will get many hours of enjoyment out of this model. If you should have

any questions or concerns please feel free to contact us at: helihotline@

hobbico.com.

For the latest technical updates or manual corrections to the AXE 100 CP visit

the Heli-Max web site at www.helimax-rc.com. Open the “Helicopters” link, and

then select the AXE 100 CP. If there is new technical information or changes to

this model a “tech notice” box will appear in the upper left corner of the page.

SAFETY PRECAUTIONS

Failure to follow these safety precautions may result in injury

to yourself and others.

●Keep your face and body as well as all spectators away from the plane of

rotation of the rotors whenever the battery is connected. Keep these items

away from the rotors: loose clothing, shirt sleeves, ties, scarfs, long hair or

loose objects such as pencils or screwdrivers that may fall out of shirt or jacket

pockets into the rotors. The spinning blades of a model helicopter can cause

serious injury. When choosing a flying site for your AXE 100 CP, stay clear of

buildings, trees and power lines. AVOID flying in or near crowded areas. DO

NOT fly close to people or pets. Maintain a safe pilot-to-helicopter distance

while flying.

●Your AXE 100 CP should not be considered a toy, but rather a sophisticated,

working model that functions very much like a full-size helicopter. Because of

its performance capabilities, the AXE 100 CP, if not operated correctly, could

possibly cause injury to you or spectators and damage to property.

●Do not alter or modify the model, as doing so may result in an unsafe or

un-flyable model.

●When and if repairing you must correctly install all components so that the model

operates correctly on the ground and in the air. Please check the operation of

the model before every flight to insure that all equipment is operating and that

the model has remained structurally sound. Be sure to check linkages or other

connectors often and replace them if they show any signs of wear or fatigue.

Battery warnings and usage guidelines: Please read and

understand the following regarding the usage of Li-Po batteries.

Through the use of the included Li-Po battery you have assumed all risk and

responsibility regarding a Li-Po battery and its use.

If your battery begins to swell or “puff” during charge or discharge, stop using it

and discard. Call or contact Hobby Services 217-398-0007 to learn the proper

way to safely discard your Li-Po cells.

●Only use the included charger with the included battery.

●Do not attempt to use included charger with NiCd or NiMH battery packs.

●If the battery should become damaged, discard it.

●Do not leave the charger unattended while charging.

●Disconnect the battery and remove input power from the charger immediately

if either becomes hot! However, it is normal for the charger to get warm.

●Never allow the battery temperature to exceed 150° F [65° C].

●Never disassemble or modify pack wiring in any way or puncture cells.

●Do not allow water, moisture or foreign objects into the charger.

●Do not block the air intake holes, which could cause the charger to overheat.

●Do not place the charger or any battery on a ﬂammable surface or near a

combustible material while in use.

●Never charge inside a vehicle.

●Always disconnect the battery from the charger and the power supply from

the charger when not in use.

●Do not attempt to charge a battery if it is swollen or hot.

●It’s best to store your batteries at room temperature

●ALWAYS KEEP OUT OF REACH OF CHILDREN.

NOTE: Heli-Max AXE battery packs are not cross

compatible with Heli-Max NOVUS brand products.

WARRANTY

Heli-Max guarantees this kit to be free from defects in both material and

workmanship at the date of purchase.This warranty does not cover any component

parts damaged by use or modification. In no case shall Heli-Max’s liability

exceed the original cost of the purchased kit. Further, Heli-Max reserves the

right to change or modify this warranty without notice. In that Heli-Max has no

control over the final assembly or material used for final assembly, no liability

shall be assumed nor accepted for any damage resulting from the use by the

user of the final user-assembled product. By the act of using the user assembled

product, the user accepts all resulting liability. If the buyer is not prepared to

accept the liability associated with the use of this product, the buyer is

advised to return this kit immediately in new and unused condition to the

place of purchase.

To make a warranty claim, Hobby Services 217-398-0007

send the defective part or 3002 N. Apollo Dr., Suite 1

item to Hobby Services Champaign, IL 61822

at this address. USA

Include a letter stating your name, return shipping address, as much contact

information as possible (daytime telephone number, fax number, e-mail address),

a detailed description of the problem and a photocopy of the purchase receipt.

Upon receipt of the package the problem will be evaluated as quickly as possible.

CONTENTS

Required: 8 AA batteries

TX 610 Transmitter (W/TX610 manual)

AXE 100 CP Helicopter

(2) 200mAh Li-Po Flight Battery

Li-Po Battery Charger

Screwdriver

Extra Blade Set

Extra Rotor Linkage Set

OPERATIONAL WARNINGS

●Please allow a 10 minute cool down period after each flight so the motor

controller and motor can cool down. Failure to do so may cause loss of control

due to the controller overheating and shutting down.

●Please inspect the main rotor blades and blade screws before each flight for

nicks or loose components. If any damage is found or if the blades have been

crashed, please replace the blades before flying the model again.

●The ESC does have a soft cut function that will reduce the power output to

protect the flight battery. Toward the end of a flight, if you notice a slight power

reduction, land the model immediately and recharge the battery. The flight

time of the AXE 100 CP can be as long as 6 minutes but this will vary depending

on your flying style.

CAUTION! After a crash you must inspect all plastic parts on the

helicopter for damage before flying the model again.

TRANSMITTER

Please read the transmitter manual included with your helicopter to learn more

about how to use and adjust your TX610.

TRANSMITTER FUNCTIONS AND SWITCHES

The Throttle Hold Switch

(HOLD/FLAP) is used to

disable the power output

of the motor but has no

effect on the other controls.

The Throttle Hold Function

was originally intended for

autorotation landings (off

power descent to landing);

this maneuver is really

not possible with a motor

driven tail.

In addition to autorotation

the throttle hold function can

be used as a safety switch while handling the model since it disables power to

the motor. Turn the transmitter on and set the Throttle Hold Switch to the on

position. Now you can safely connect the flight battery without having to worry

about inadvertently moving the throttle stick. Once you place the model on the

ground, verify that the idle up switch is off and the throttle stick has been moved

to its lowest position, then simply turn the throttle hold off. The model is now

ready to fly. Another use for the throttle hold function is to disable the motor

before a crash without having to drop the collective stick (possibly forcing the

model into the ground). Disabling the motor before a crash can prevent a lot

of damage.

The UP-1 function is enabled

and ready to use. The UP-1

switch (UP-1/GEAR)

function is used for

aerobatics and 3D flight. If

you are a beginner to

aerobatics remember this

switch sets the motor speed

(see your TX610 manual for

details) while still allowing

positive and negative pitch

control. This means pulling

the throttle stick back WILL

NOT decrease the power to

the motor but rather add

power. Hence it’s a good

idea to learn to use the

Throttle Hold Switch when

you feel a crash is imminent!

STICK CONTROLS

Throttle/Collective

Tail (rudder)

Left and right cyclic

Forward and back cyclic

It’s also important to know that your TX610 transmitter is capable of a system

reset. (See how this is done in the TX610 Manual) If you decide to do a system

reset, the factory setup numbers to the Heli-Max AXE 100 CP are listed here.

Below are the factory setup parameters for your AXE 100 CP Helicopter.

TX610 1 2 3 4 5 6

Servo Reverse NOR NOR REV NOR NOR NOR

Dual Rates 80/100 80/100 80/100

Exponential -20 -20 0

Sub Trims 0 0 0

Normal Throttle 0 45 75 92 100

Normal Pitch 40 45 55 70 75

UP-1 Throttle DIAL

UP-1 PITCH 30 42 55 65 75

Gyro 35 NON HH 75 HH

Swashplate Type 90deg

GETTING THE MODEL READY TO FLY

INSTALL BATTERIES IN THE TRANSMITTER

Remove the battery cover from the back

of the transmitter and install eight “AA”

batteries into the transmitter. Double-

check the polarity of each battery before

replacing the battery cover.

CHARGE THE FLIGHT BATTERY

Plug the wall power supply into any 110V

standard outlet. Plug the remaining

4mm plug into the side of the charger

box.The center front panel LED will light

letting you know the charger has power.

Plug the helicopter’s power battery into

the open connector of the charger.The

charger will beep twice letting you know

the battery is connected. At this point

you can select a slower or faster charge

rate by pressing the + or – buttons

located on the face of the charger.While

the LED is illuminated you will need to

press the charge button. You will hear

3 beeps and the charge cycle will begin.

When charging is complete, all the

LEDs will flash and you will hear a

steady set of beeps coming from the

unit.

Unplug the battery. It is now ready

to use.

NOTE: Your AXE 100 CP battery

charger ranges from .3AMPS to .7AMPS

in .1 amp increments. The higher this

value, the faster the battery will charge.

We recommend not charging the battery

over 2.2C or .5AMPS (Default).

TURN THE TRANSMITTER ON

Verify that the HOLD/FLAP and UP-1/GEAR functions are off and slide the power

switch up to turn the transmitter on. If the transmitter is turned on with the HOLD/

FLAP or UP-1/GEAR function switched on, the screen will show “3D” or “T-H” and

a warning will sound. Please turn the HOLD/FLAP and UP-1/GEAR functions off

to continue. Now is a good time to make sure the electronic trim buttons on the

transmitter are centered. We do not need to use them as the precision Heli-Max

TAGS system controls all flight center trims.

INSTALL THE FLIGHT BATTERY

Slide the battery into the helicopter.

Make sure the battery is slid all the

way to the front of the battery tray. Take

extra care in making sure the wires

don’t come in contact with any of the

moving parts.

Warning! Once the flight battery has

been connected, the helicopter will

have full power available. Now is a good

time to turn on the HOLD/FLAP switch.

With the helicopter sitting still on a flat

surface, connect the flight battery to the

ESC. The helicopter must remain still

for the gyro to initialize properly. This

process takes approximately 5 seconds

or so. Turn off the HOLD/FLAP switch.

The helicopter is ready to go.

FLYING YOUR AXE100 CP

Takeoff: During your first flights it is important to have light winds. Also, if you

are flying from grass, place a rubber mat or pad down on the grass so the small

rotating parts don’t get hung up on the grass.

Slowly add power and observe the model. The AXE100 CP has the incredible

Heli-Max TAGS system.The TAGS system takes care of all the center trim function

the transmitter might have. Having said this, you do not need or want to move

the trim buttons during flight.

Inhaltsverzeichnis

Andere Heli-Max Spielzeug Handbücher

Heli-Max

Heli-Max MX400 PRO Bedienungsanleitung

Heli-Max

Heli-Max EC145 Bedienungsanleitung

Heli-Max

Heli-Max AXE CX Nano Bedienungsanleitung

Heli-Max

Heli-Max Axe EZ Bedienungsanleitung

Heli-Max

Heli-Max Novus AH-1J SeaCobra Bedienungsanleitung

Heli-Max

Heli-Max BLACK HAWK Bedienungsanleitung

Heli-Max

Heli-Max 1SQ V-cam Bedienungsanleitung

Heli-Max

Heli-Max AXE Mini EP RTF Bedienungsanleitung

Heli-Max

Heli-Max Comanche CX Bedienungsanleitung

Heli-Max

Heli-Max Novus UH-1D HUEY Bedienungsanleitung

Heli-Max

Heli-Max AXE CP-L Bedienungsanleitung

Heli-Max

Heli-Max Axe 100 FP 2.4GHz RTF Bedienungsanleitung

Heli-Max

Heli-Max AXE100 SS Bedienungsanleitung

Heli-Max

Heli-Max AXE 400 3D Rx-R Bedienungsanleitung

Heli-Max

Heli-Max AXE CPv3 Bedienungsanleitung

Heli-Max

Heli-Max Novus FP Bedienungsanleitung

Heli-Max

Heli-Max Kinetic 50 Bedienungsanleitung

Heli-Max

Heli-Max AXE 400 RTF Bedienungsanleitung

Heli-Max

Heli-Max Axe CX Micro Bedienungsanleitung

Heli-Max

Heli-Max MD530 2.4GHz RTF/Tx-R Bedienungsanleitung

Heli-Max

Heli-Max MX400 PRO Bedienungsanleitung

Heli-Max

Heli-Max 2000FP V-Cam Bedienungsanleitung

Heli-Max

Heli-Max Novus 125 CP Bedienungsanleitung

Heli-Max

Heli-Max Novus CP Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken

marklin

marklin 37321 Bedienungsanleitung

Canon

Canon PAPER CRAFT Bedienungsanleitung

GREAT PLANES

GREAT PLANES Pitts M-12S Bedienungsanleitung

NOCH

NOCH 14261 Bedienungsanleitung

Hausler

Hausler 450 SE V2 Bedienungsanleitung

Dynaflite

Dynaflite Daydream Bedienungsanleitung

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Handbuch

Kenner

Kenner Batman 63651 Bedienungsanleitung

LEGO

LEGO 8527 Bedienungsanleitung

iKarus

iKarus ECO 8 Bedienungsanleitung

Multiplex

Multiplex EasyStar II Bedienungsanleitung

Walkera

Walkera 38 Bedienungsanleitung

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Bedienungsanleitung

MD MXION SWD Bedienungsanleitung

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Bedienungsanleitung

marklin

marklin 39671 Bedienungsanleitung

Meccano

Meccano 15103 Bedienungsanleitung

LEGO

LEGO TECHNIC 8735 Bedienungsanleitung