HIK VISION NVR-100MH-D/W Series Bedienungsanleitung

Network Video Recorder

User Manual

Network Video Recorder User Manual

Legal Information

About this Manual

Pictures, charts, images and all other information hereinafter are for description and explanation

only. The information contained in the Manual is subject to change, without notice, due to

firmware updates or other reasons. Please find the latest version in the company website

(https://www.hikvision.com/). Please use this user manual under the guidance of professionals.

Trademarks

and other Hikvision's trademarks and logos are the properties of Hikvision in

various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

: The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI

Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United

States and other countries.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND

“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR

A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT

WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY

RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,

VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE

TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

Network Video Recorder User Manual

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE

LATTER PREVAILS.

Network Video Recorder User Manual

iii

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

●Reorient or relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

●Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

●Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance 20cm between the

radiator and your body.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

●This device may not cause harmful interference.

●This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked

with "CE" and comply therefore with the applicable harmonized

European standards listed under the RE Directive 2014/53/EU, the EMC

Directive 2014/30/EU, LVD Directive 2014/35/EU, the RoHS Directive

2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot

be disposed of as unsorted municipal waste in the European Union. For

proper recycling, return this product to your local supplier upon the

purchase of equivalent new equipment, or dispose of it at designated

Network Video Recorder User Manual

collection points. For more information see:

http://www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that

cannot be disposed of as unsorted municipal waste in the European

Union. See the product documentation for specific battery information.

The battery is marked with this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,

return the battery to your supplier or to a designated collection point. For

more information see: http://www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is

subject to the following two conditions:this device may not cause interference, and

2. this device must accept any interference, including interference that may cause undesired

operation of the device.

1. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :l'appareil

ne doit pas produire de brouillage, et

2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a

type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce

potential radio interference to other users, the antenna type and its gain should be so chosen that

the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful

communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut

fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour

l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à

l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la

puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à

l'établissement d'une communication satisfaisante.

This equipment should be installed and operated with a minimum distance 20cm between the

radiator and your body.

Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et

votre corps.

Network Video Recorder User Manual

Applicable Model

This manual is applicable to the following models.

Table 1-1 Applicable Model

Series

Model

NVR-100MH-D/W

NVR-104MH-D/W

NVR-108MH-D/W

Network Video Recorder User Manual

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Danger

Indicates a hazardous situation which, if not avoided, will or could

result in death or serious injury.

Caution

Indicates a potentially hazardous situation which, if not avoided,

could result in equipment damage, data loss, performance

degradation, or unexpected results.

Note

Provides additional information to emphasize or supplement

important points of the main text.

Network Video Recorder User Manual

vii

Safety Instruction

●Proper configuration of all passwords and other security settings is the responsibility of the

installer and/or end-user.

●In the use of the product, you must be in strict compliance with the electrical safety regulations

of the nation and region.

●Firmly connect the plug to the power socket. Do not connect several devices to one power

adapter. Power off the device before connecting and disconnecting accessories and peripherals.

●Shock hazard! Disconnect all power sources before maintenance.

●The equipment must be connected to an earthed mains socket-outlet.

●The socket-outlet shall be installed near the equipment and shall be easily accessible.

●indicates hazardous live and the external wiring connected to the terminals requires

installation by an instructed person.

●Never place the equipment in an unstable location. The equipment may fall, causing serious

personal injury or death.

●Input voltage should meet the SELV (Safety Extra Low Voltage) and the LPS (Limited Power

Source) according to the IEC62368.

●High touch current! Connect to earth before connecting to the power supply.

●If smoke, odor or noise rise from the device, turn off the power at once and unplug the power

cable, and then please contact the service center.

●Use the device in conjunction with an UPS, and use factory recommended HDD if possible.

●This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe

internal burns in just 2 hours and can lead to death.

●This equipment is not suitable for use in locations where children are likely to be present.

●CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

●Improper replacement of the battery with an incorrect type may defeat a safeguard (for

example, in the case of some lithium battery types).

●Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery,

which may result in an explosion.

●Do not leave the battery in an extremely high temperature surrounding environment, which

may result in an explosion or the leakage of flammable liquid or gas.

●Do not subject the battery to extremely low air pressure, which may result in an explosion or

the leakage of flammable liquid or gas.

●Dispose of used batteries according to the instructions.

●Keep body parts away from fan blades and motors. Disconnect the power source during

servicing.

●Keep body parts away from motors. Disconnect the power source during servicing.

Network Video Recorder User Manual

viii

Preventive and Cautionary Tips

Before connecting and operating your device, please be advised of the following tips:

●The device is designed for indoor use only. Install it in a well-ventilated, dust-free environment

without liquids.

●Ensure recorder is properly secured to a rack or shelf. Major shocks or jolts to the recorder as a

result of dropping it may cause damage to the sensitive electronics within the recorder.

●The equipment shall not be exposed to dripping or splashing and that no objects filled with

liquids shall be placed on the equipment, such as vases.

●No naked flame sources, such as lighted candles, should be placed on the equipment.

●The ventilation should not be impeded by covering the ventilation openings with items, such as

newspapers, table-cloths, curtains, etc. The openings shall never be blocked by placing the

equipment on a bed, sofa, rug or other similar surface.

●For certain models, ensure correct wiring of the terminals for connection to an AC mains supply.

●For certain models, the equipment has been designed, when required, modified for connection

to an IT power distribution system.

●identifies the battery holder itself and identifies the positioning of the cell(s) inside the

battery holder.

●+ identifies the positive terminal(s) of equipment which is used with, or generates direct

current. + identifies the negative terminal(s) of equipment which is used with, or generates

direct current.

●Keep a minimum 200 mm (7.87 inch) distance around the equipment for sufficient ventilation.

●For certain models, ensure correct wiring of the terminals for connection to an AC mains supply.

●Use only power supplies listed in the user manual or user instruction.

●The USB port of the equipment is used for connecting to a mouse, keyboard, USB flash drive, or

Wi-Fi dongle only.

●Use only power supplies listed in the user manual or user instruction.

●Do not touch the sharp edges or corners.

Network Video Recorder User Manual 
ix 
Contents 
Chapter 1 Startup.......................................................................................................................1 
1 Activate Your Device .............................................................................................................1 
2 Login.......................................................................................................................................2 
2.1 Set Unlock Pattern .....................................................................................................2 
2.2 Log in via Unlock Pattern ...........................................................................................3 
2.3 Log in via Password....................................................................................................3 
Chapter 2 Live View....................................................................................................................5 
1 GUI Introduction....................................................................................................................5 
2 PTZ Control ............................................................................................................................6 
2.1 Configure PTZ Parameter...........................................................................................6 
2.2 PTZ Control Panel Introduction .................................................................................8 
2.3 Customize Preset........................................................................................................8 
2.4 Customize Patrol ........................................................................................................8 
2.5 Customize Pattern......................................................................................................9 
Chapter 3 Playback...................................................................................................................10 
1 GUI Introduction..................................................................................................................10 
2 Normal Playback..................................................................................................................11 
3 Event Playback.....................................................................................................................12 
4 Back up Clip .........................................................................................................................13 
Chapter 4 Search File................................................................................................................15 
Chapter 5 Configuration (Easy Mode) .......................................................................................16 
1 System Configuration..........................................................................................................16 
1.1 General .....................................................................................................................16 
1.2 User...........................................................................................................................17 
1.3 Exception ..................................................................................................................19 
2 Network Configuration .......................................................................................................20 
2.1 General .....................................................................................................................20 
2.2 HiLookVision.............................................................................................................21 
2.3 Email .........................................................................................................................22 

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HIK VISION Netzwerk-Hardware Handbücher

HIK VISION

HIK VISION DS-7604NI-VP Bedienungsanleitung

HIK VISION

HIK VISION Ds-7604ni-e1, ds-7608ni-e1 Bedienungsanleitung

HIK VISION

HIK VISION DS-7604NI-E1/4P Bedienungsanleitung

HIK VISION

HIK VISION iDS-9664NXI-M8/X Bedienungsanleitung

HIK VISION

HIK VISION HWN Series Bedienungsanleitung

HIK VISION

HIK VISION UD04701B Bedienungsanleitung

HIK VISION

HIK VISION DS-7600NI Series Bedienungsanleitung

HIK VISION

HIK VISION DeepinMind Series Bedienungsanleitung

HIK VISION

HIK VISION iDS-9600NXI-I16/4F Series Bedienungsanleitung

HIK VISION

HIK VISION DS-9600NI-SH Series Bedienungsanleitung

HIK VISION

HIK VISION DS-9600NI-I8 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-9600NI-I8B Series Bedienungsanleitung

HIK VISION

HIK VISION iDS-96000NXI-I16B Series Bedienungsanleitung

HIK VISION

HIK VISION DeepinMind Super iDS-96128NXI-I24 Bedienungsanleitung

HIK VISION

HIK VISION DS-7764NI-M4 Bedienungsanleitung

HIK VISION

HIK VISION DS-76xxNI-Ex/xP Bedienungsanleitung

HIK VISION

HIK VISION DS-9600NI-I8 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-8600 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-7100NI-K1/W/M Series Bedienungsanleitung

HIK VISION

HIK VISION DS-7116HQHI-K1 Bedienungsanleitung

HIK VISION

HIK VISION DS-E04NI-Q1 Bedienungsanleitung

HIK VISION

HIK VISION DS-7100NI-E1 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-7604NI-Q1 Bedienungsanleitung

HIK VISION

HIK VISION DS-96128NI-E16 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung