HIK VISION 2D Series Bedienungsanleitung

Network Mini Camera

Quick Start Guide

Network Mini Camera·Quick Start Guide

Quick Start Guide

Any and all information, including, among others, wordings, pictures,

graphs are the properties of Hangzhou Hikvision Digital Technology

Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).

This user manual (hereinafter referred to be “the Manual”) cannot

be reproduced, changed, translated, or distributed, partially or

wholly, by any means, without the prior written permission of

Hikvision. Unless otherwise stipulated, Hikvision does not make any

warranties, guarantees or representations, express or implied,

regarding to the Manual.

About this Manual

This Manual is applicable to 2Dxx Network Camera.

The Manual includes instructions for using and managing the

product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The

information contained in the Manual is subject to change, without

notice, due to firmware updates or other reasons. Find the latest

version in the company website (http://overseas.hikvision.com/en/).

Visit the company website (http://overseas.hikvision.com/en/) to

get the manuals, client software, and developing tools.

Use this manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the

properties of Hikvision in various jurisdictions. Other trademarks and

Network Mini Camera·Quick Start Guide

logos mentioned below are the properties of their respective

owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE

PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND

FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,

AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL

HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE

LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR

LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF

DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF

THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF

PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL

NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET

SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. CHECK ALL RELEVANT

LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN

ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE

Network Mini Camera·Quick Start Guide

LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS

PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to

comply with the limits for a digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own

expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

Network Mini Camera·Quick Start Guide

therefore with the applicable harmonized European standards listed

under the EMC Directive 2014/30/EU, the RoHS Directive

2011/65/EU.

2012/19/EU (WEEE directive): Products marked

with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info

2006/66/EC (battery directive): This product

contains a battery that cannot be disposed of as

unsorted municipal waste in the European Union.

See the product documentation for specific battery

information. The battery is marked with this symbol,

which may include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery to your

supplier or to a designated collection point. For more information

see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards

requirements.

Safety Instruction

These instructions are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”

Network Mini Camera·Quick Start Guide

Warnings: Serious injury or death may occur if any of the warnings

are neglected.

Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

Warnings

●Proper configuration of all passwords and other security

settings is the responsibility of the installer and/or end-user.

●In the use of the product, you must be in strict compliance with

the electrical safety regulations of the nation and region. Refer

to technical specifications for detailed information.

●Input voltage should meet both the SELV (Safety Extra Low

Voltage) and the Limited Power Source with 24 VAC or 12 VDC

according to the IEC60950-1 standard. Refer to technical

specifications for detailed information.

●Do not connect several devices to one power adapter as

adapter overload may cause over-heating or a fire hazard.

Warnings Follow these

safeguards to prevent

serious injury or death.

Cautions Follow these

precautions to prevent

potential injury or material

damage.

Network Mini Camera·Quick Start Guide

●Make sure that the plug is firmly connected to the power socket.

When the product is mounted on wall or ceiling, the device

shall be firmly fixed.

●If smoke, odor or noise rise from the device, turn off the power

at once and unplug the power cable, and contact the service

center.

Cautions

●If the camera fails to synchronize the local time with that of the

network, you need to set up the camera time manually. Visit

the camera (via the web browser or client software) and enter

the system settings interface for the time settings.

●Make sure the power supply voltage is correct before using the

camera.

●Do not drop the camera or subject it to physical shock.

●Do not touch sensor modules with fingers. If cleaning is

necessary, use clean cloth with a bit of ethanol and wipe it

gently. If the camera will not be used for an extended period,

replace the lens cap to protect the sensor from dirt.

●Do not aim the camera at the sun or extra bright places.

Blooming or smearing may occur otherwise (which is not a

malfunction), and affect the endurance of sensor at the same

time.

●The sensor may be burned out by a laser beam, so when any

laser equipment is in using, make sure that the surface of

sensor will not be exposed to the laser beam.

Network Mini Camera·Quick Start Guide

●Do not place the camera in extremely hot, cold (the operating

temperature shall be -30°C to +60°C if the camera model has an

“H” in its suffix), dusty or damp locations, and do not expose it

to high electromagnetic radiation.

●To avoid heat accumulation, good ventilation is required for

operating environment.

●Keep the camera away from liquid while in use.

●While in delivery, the camera shall be packed in its original

packing, or packing of the same texture.

●Regular part replacement: a few parts (e.g. electrolytic

capacitor) of the equipment shall be replaced regularly

according to their average enduring time. The average time

varies because of differences between operating environment

and using history, so regular checking is recommended for all

the users. Contact with your dealer for more details.

●Improper use or replacement of the battery may result in

hazard of explosion. Replace with the same or equivalent type

only. Dispose of used batteries according to the instructions

provided by the battery manufacturer.

●If the product does not work properly, contact your dealer or

the nearest service center. Never attempt to disassemble the

camera yourself. (We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

1080108

Network Mini Camera·Quick Start Guide

Table of Contents

1 Appearance Description ............................................................... 10

Type I, II......................................................................... 101.1

Type III, IV ..................................................................... 121.2

2 Installation.................................................................................... 15

Type I, II......................................................................... 152.1

Type III, IV ..................................................................... 182.2

Ceiling Mounting ................................................ 182.2.1

Wall Mounting.................................................... 192.2.2

3 Set the Network Camera over the LAN......................................... 21

Wiring ........................................................................... 213.1

Activate the Camera...................................................... 223.2

Activation via Web Browser................................ 223.2.1

Activation via SADP Software ............................. 233.2.2

Modify the IP Address ................................................... 253.3

4 Access via Web Browser ............................................................... 28

5 Operate via Hik-Connect App ....................................................... 30

5.1 Enable Hik-Connect Service on Camera......................... 30

Enable Hik-Connect Service via SADP Software .. 305.1.1

Enable Hik-Connect Service via Web Browser .... 315.1.2

5.2 Hik-Connect Setup ........................................................ 33

5.3 Add Camera to Hik-Connect .......................................... 33

5.4 Initialize the Memory Card ............................................ 35

Network Mini Camera·Quick Start Guide

1Appearance Description

There are four mini camera appearances available for this camera

series, refer to the following chapters for details.

Type I, II1.1

DC12V IN

Figure 1-1 Overview of Type I Mini Camera

Inhaltsverzeichnis

Andere HIK VISION Sicherheitskamera Handbücher

HIK VISION

HIK VISION DS-2AE7232TI-A Bedienungsanleitung

HIK VISION

HIK VISION IDS-2CD7046G0-AP Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD1143G0-I Bedienungsanleitung

HIK VISION

HIK VISION I092000 Bedienungsanleitung

HIK VISION

HIK VISION TurboHD DS-2CE56D7T-IT Z Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE11H0T-PIRL Bedienungsanleitung

HIK VISION

HIK VISION DS-PDCM15PF-IR Bedienungsanleitung

HIK VISION

HIK VISION DS-2AF1-611X Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE72DF3T-LSE Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD6412FWD-20 Benutzerhandbuch

HIK VISION

HIK VISION TURBO HD H8T Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2146G1-IS-4mm Bedienungsanleitung

HIK VISION

HIK VISION DS-2DF5220S-DE4/Ww Bedienungsanleitung

HIK VISION

HIK VISION DS-TCG227-A Series Bedienungsanleitung

HIK VISION

HIK VISION TurboHD H0T Series Bedienungsanleitung

HIK VISION

HIK VISION TurboHD DS-2CE16D0T-WL5 Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD7255F-EIZHS Bedienungsanleitung

HIK VISION

HIK VISION ECI-B64Z2 Bedienungsanleitung

HIK VISION

HIK VISION DS-2AE714 Bedienungsanleitung

HIK VISION

HIK VISION 5 Inch Network High Speed Dome Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2443G0-IW Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD5A46G1-IZHS Bedienungsanleitung

HIK VISION

HIK VISION DS-2CC5281P Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD8253F-EI Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung