HIK VISION DS-2CD2H85FWD-IZS Bedienungsanleitung

Turret Network Camera

Quick Start Guide

reserved.

About this Manual

The Manual includes instructions for using and managing the Product.

Pictures, charts, images and all other information hereinafter are for

description and explanation only. The information contained in the

Manual is subject to change, without notice, due to rmware updates

or other reasons. Please nd the latest version of this Manual at the

Hikvision website (http://www.hikvision.com/).

Please use this Manual with the guidance and assistance of

professionals trained in supporting the Product.

Trademarks Acknowledgment

and other Hikvision’s trademarks and logos are the

properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their

respective owners.

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED

“AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY

QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE

USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN

NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY

SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR

LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,

OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS

OF DOCUMENTATION, WHETHER BASED ON BREACH OF

CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF

THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET

PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION

USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.

HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR

ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER

DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK,

VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;

HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL

SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL

APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR

ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE

LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS

PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE

RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION,

RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR

DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL

NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES,

INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS

OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION

OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN

THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR

UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND

THE APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modication not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.

FCC compliance: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help

FCC conditions

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories

too are marked with "CE" and comply therefore withthe

applicable harmonized European standards listed under

the the EMC Directive 2014/30/EU, the RoHS Directive

2011/65/EU.

2012/19/EU (WEEE directive): Products marked with

this symbol cannot be disposed of as unsorted municipal

waste in the European Union. For proper recycling, return

this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated

collection points. For more information see: www.

recyclethis.info

2006/66/EC and its amendment 2013/56/EU (battery

directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European

Union. See the product documentation for specic battery

information. The battery is marked with this symbol, which

may include lettering to indicate cadmium (Cd), lead (Pb),

or mercury (Hg). For proper recycling, return the battery to

your supplier or to a designated collection point. For more

information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards

requirements.

Cautions & Warnings

These instructions are intended to ensure that the user can use the

product correctly to avoid danger or property loss.

Laws and Regulations

The device should be used in compliance with local laws, electrical

safety regulations, and re prevention regulations.

Transportation

Keep the device in original or similar packaging while transporting it.

Power Supply

The input voltage should conform to IEC60950-1 standard: SELV

(Safety Extra Low Voltage) and the LPS (Limited Power Source).

Refer to the appropriate documentation for detailed information.

DO NOT connect multiple devices to one power adapter, to avoid

over-heating or re hazards caused by overload.

Make sure the plug is properly connected to the power socket.

System Security

The installer and user are responsible for password and security

conguration and its settings.

Battery

This equipment is not suitable for use in locations where children

are likely to be present.

CAUTION: Risk of explosion if the battery is replaced by an incorrect

type. Dispose of used batteries according to the instructions

ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA BATTERIE

EST REMPLACÉE PAR UNE BATTERIE DE TYPE

INCORRECT. METTRE AU REBUT LES BATTERIES USAGÉES

CONFORMÉMENT AUX INSTRUCTIONS

Improper replacement of the battery with an incorrect type may

defeat a safeguard (for example, in the case of some lithium battery

types).

Do not dispose of the battery into re or a hot oven, or mechanically

crush or cut the battery, which may result in an explosion.

Do not leave the battery in an extremely high temperature

surrounding environment, which may result in an explosion or the

leakage of ammable liquid or gas.

Do not subject the battery to extremely low air pressure, which may

result in an explosion or the leakage of ammable liquid or gas.

Maintenance

If the product does not work properly, please contact your dealer or

the nearest service center. We shall not assume any responsibility

for problems caused by unauthorized repair or maintenance.

A few device components (e.g., electrolytic capacitor) require

regular replacement. The average lifespan varies, so periodic

checking is recommended. Contact your dealer for details.

Cleaning

Please use a soft and dry cloth when clean inside and outside

surfaces of the product cover. Do not use alkaline detergents.

Using Environment

When any laser equipment is in use, make sure that the device lens

is not exposed to the laser beam, or it may burn out.

Do not expose the device to high electromagnetic radiation or dusty

environments.

For indoor-only device, place it in a dry and well-ventilated

environment.

Do not aim the lens at the sun or any other bright light.

Make sure the running environment meets the requirement of the

device. The operating temperature shall be -30 °C to 60 °C (-22°F

to 140 °F), and the operating humidity shall be 95% or less (no

condensing).

Do not place the camera in extremely hot, cold, dusty or damp

locations, and do not expose it to high electromagnetic radiation.

IR Reection Prevention

Dust or grease on the dome cover will cause IR reection. Please

do not remove the dome cover lm until the installation is nished.

If there is dust or grease on the dome cover, clean the dome cover

with clean soft cloth and isopropyl alcohol.

Make sure that there is no reective surface too close to the camera

lens. The IR light from the camera may reect back into the lens

causing reection.

The foam ring around the lens must be seated flush against the

inner surface of the bubble to isolate the lens from the IR LEDS.

Fasten the dome cover to camera body so that the foam ring and

the dome cover are attached seamlessly.

Emergency

If smoke, odor, or noise arises from the device, immediately turn off

the power, unplug the power cable, and contact the service center.

Time Synchronization

Set up camera time manually for the rst time access if the local

time is not synchronized with that of the network. Visit the camera

via Web browse/client software and go to time settings interface.

Installation

Make sure the device is firmly secured to any wall or ceiling

mountings.

Be sure that there is enough space to install the camera and

accessories.

Make sure that the device in the package is in good condition and

all the assembly parts are included.

Make sure that the wall is strong enough to withstand at least 4

times the weight of the camera and the mount.

Make sure that the power has been disconnected before you wire,

install, or disassemble the device.

Make sure that no reective surface is too close to the camera lens.

The IR light from the camera may reect back into the lens causing

reection.

CAUTION: Hot parts! Burned ngers when

handling the parts. Wait one-half hour after

switching off before handling parts. This sticker

is to indicate that the marked item can be hot

and should not be touched without taking care. For device with this

sticker, this device is intended for installation in a restricted access

location, access can only be gained by service persons or by users

who have been instructed about the reasons for the restrictions

applied to the location and about any precautions that shall be

taken.

Symbols and Marks

Notice

Warning

Forbidden

Correct

Incorrect

Turn to page A and continue.

i. Not necessarily included accessory.

ii. Variable accessory amount.

iii. Skip this step if not required.

MicroSD card

Grounding

Functional grounding

Disposal

Purchase separately

Other situations

Other situations omitted

Waterproof

Skip this step if not necessary

2x 1x*

1x1x

T10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HIK VISION Sicherheitskamera Handbücher

HIK VISION

HIK VISION DS-2CE56D5T-VFIT3 Bedienungsanleitung

HIK VISION

HIK VISION TURBO HD DF7T Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CC102PN-IRA Bedienungsanleitung

HIK VISION

HIK VISION DS-2XS6A25G0-I/CH20S40 Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD4A26FWD-IZSP Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD5A46G1-IZHS Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE11H0T-PIRL Bedienungsanleitung

HIK VISION

HIK VISION DE4 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CC502P-DG1 Bedienungsanleitung

HIK VISION

HIK VISION ECI-B62Z2 Bedienungsanleitung

HIK VISION

HIK VISION HiLook D1 Series Bedienungsanleitung

HIK VISION

HIK VISION IDS-2CD7A46G0-IZHSY 8-32 Bedienungsanleitung

HIK VISION

HIK VISION H1T Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE56H1T-VPIT3Z Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD23 Series Bedienungsanleitung

HIK VISION

HIK VISION iDS-2CD7A86G0-IZHSY Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD852MF-E Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CC5181P-VPIR Bedienungsanleitung

HIK VISION

HIK VISION DS-2XC6225G0-L Bedienungsanleitung

HIK VISION

HIK VISION DS-2TD2466-50Y Bedienungsanleitung

HIK VISION

HIK VISION DS-2DE7430IW-AE Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2555FWD-I Bedienungs- und Wartungsanleitung

HIK VISION

HIK VISION DS-2CD7133-E Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2D21G0/M/NF Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung