HIK VISION DS-2CD802PF-E Series Bedienungsanleitung

Network Camera

User Manual

V2.0.0

User Manual of Network Camera

Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate

to contact the dealer.

This manual applies to DS-2CD802/812/892PF(NF)(-E)(-W), DS-2CD832F(-E),

DS-2CD802/812/892P(N)-IR1(IR3)(IR5), DS-2CD702/712/792PF(NF)(-E), DS-2CD732F(-E)series Network

Camera

This manual may contain several technical incorrect places or printing errors, and the content is

subject to change without notice. The updates will be added to the new version of this manual. We

will readily improve or update the products or procedures described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security

or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as

outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover the performance

or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS,

WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY

OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

User Manual of Network Camera

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the limits for a digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed

under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC.

2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of

as unsorted municipal waste in the European Union. For proper recycling, return this

product to your local supplier upon the purchase of equivalent new equipment, or

dispose of it at designated collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product

documentation for specific battery information. The battery is marked with this

symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For

more information see: www.recyclethis.info.

User Manual of Network Camera

Safety Warnings and Cautions

Please pay attention to the following warnings and cautions:

Hazardous Voltage may be present: Special measures and precautions must be taken

when using this device. Some potentials (voltages) on the device may present a hazard to the user.

This device should only be used by employees from our company with knowledge and training in

working with these types of devices that contain live circuits.

Power Supply Hazardous Voltage: AC mains voltages are present within the power supply assembly.

This device must be connected to a UL approved, completely enclosed power supply, of the proper

rated voltage and current. No user serviceable parts inside the power supply.

System Grounding (Earthing): To avoid shock, ensure that all AC wiring is not exposed and that the

earth grounding is maintained. Ensure that any equipment to which this device will be attached is

also connected to properly wired grounded receptacles and are approved medical devices.

Power Connect and Disconnect: The AC power supply cord is the main disconnect

device to mains (AC power).The socket outlet shall be installed near the equipment and shall be

readily accessible.

Installation and Maintenance: Do not connect/disconnect any cables to or perform

installation/maintenance on this device during an electrical storm.

User Manual of Network Camera

Power Cord Requirements: The connector that plugs into the wall outlet must be a grounding-type

male plug designed for use in your region. It must have certification marks showing certification by

an agency in your region. The connector that plugs into the AC receptacle on the power supply must

be an IEC 320, sheet C13, female connector. See the following website for more information

http://kropla.com/electric2.htm.

Lithium Battery: This device contains a Lithium Battery. There is a risk of explosion if

the battery is replaced by an incorrect type. Dispose of used batteries according to the vendor’s

instructions and in accordance with local environmental regulations.

Perchlorate Material: Special handling may apply. See

www.dtsc.ca.gov/hazardouswaste/perchlorate. This notice is required by California Code of

Regulations, Title 22, Division 4.5, Chapter 33: Best Management Practices for Perchlorate Materials.

This device includes a battery which contains perchlorate material.

Taiwan battery recycling:

Please recycle batteries.

Thermal and Mechanical Injury: Some components such as heat sinks, power

regulators, and processors may be hot; care should be taken to avoid contact with these

components.

Electro Magnetic Interference: This equipment has not been tested for compliance with emissions

limits of FCC and similar international regulations. This device is not, and may not be, offered for

sale or lease, or sold, or leased until authorization from the United States FCC or its equivalent in

other countries has been obtained. Use of this equipment in a residential location is prohibited. This

equipment generates, uses and can radiate radio frequency energy which may result in harmful

interference to radio communications. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment on and off, the user is

required to take measures to eliminate the interference or discontinue the use of this equipment.

Lead Content:

Please recycle this device in a responsible manner. Refer to local

environmental regulations for proper recycling; do not dispose of device in unsorted municipal

waste.

User Manual of Network Camera

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly to avoid

danger or property loss.

The precaution measure is divided into ‘Warnings’ and ‘Cautions’:

Warnings: Serious injury or death may be caused if any of these warnings are neglected.

Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.

Warnings Follow these safeguards to

prevent serious injury or death.

Cautions Follow these precautions to

prevent potential injury or material

damage.

Warnings

1. In the use of the product, you must strictly comply with the electrical safety regulations of the

nation and region.

2. Source with 24V AC or 12V DC according to the IEC60950－1 standard. Please refer to technical

specifications for more details.

3. Do not connect several devices to one power adapter as an adapter overload may cause

over-heating and can be a fire hazard.

4. Please make sure that the plug is firmly inserted into the power socket.

5. When the product is installed on a wall or ceiling, the device should be firmly fixed.

6. If smoke, odor, or noise rise from the device, turn off the power at once and unplug the power

cable, then contact the service center.

7. If the product does not work properly, please contact your dealer or the nearest service center.

Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

User Manual of Network Camera

Cautions

1. Make sure the power supply voltage is correct before using the camera.

2. Do not drop the camera or subject it to physical shock.

3. Do not touch CCD (Charge Coupled Device) modules with fingers. If cleaning is necessary, use a

clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an

extended period of time, put on the lens cap to protect the CCD from dirt.

4. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur

otherwise (which is not a malfunction however), and affecting the endurance of CCD at the

same time.

5. The CCD may be burned out by a laser beam, so when any laser equipment is being used, make

sure that the surface of the CCD will not be exposed to the laser beam.

6. Do not place the camera in extremely hot or cold temperatures (the operating temperature

should be between -10°C ~+60°C ), dusty or damp locations, and do not expose it to high

electromagnetic radiation.

7. To avoid heat accumulation, good ventilation is required for a proper operating environment.

8. Keep the camera away from liquids.

9. While shipping, the camera should be packed in its original packing, or packing of the same

texture.

10. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment should be

replaced regularly according to their average life time. The average time varies because of

differences between operating environment and usage history, so regular checking is

recommended for all users. Please contact with your dealer for more details.

User Manual of Network Camera

Table of Contents

Chapter 1 Introduction...........................................................................................................................8

1.1 Network camera Functions and Features.....................................................................................8

1.2 Applications ..................................................................................................................................9

Chapter 2 Installation...........................................................................................................................10

2.1 Panels Description ......................................................................................................................10

2.1.1 Side Elevation of the Camera...............................................................................................10

2.1.2 Rear Panel Description.........................................................................................................11

2.2 Product Installation ....................................................................................................................14

2.2.1 Box camera Installation........................................................................................................14

2.2.2 Dome camera Installation ....................................................................................................15

2.2.3 Topological graph of network camera..................................................................................16

Chapter 3 Parameter Configuration.....................................................................................................18

3.1 Network Camera access model overview ..................................................................................18

3.1.1 Wireless Network (Only “-w” series support) .....................................................................18

3.1.2 Wired network.....................................................................................................................19

3.2 Visit Network Camera in LAN .....................................................................................................19

3.3 Configuration via Web browser..................................................................................................19

3.4 Configuration via Client Software...............................................................................................24

3.5 Wireless Network Camera Access ..............................................................................................30

3.6 Visit Network Camera via Internet.............................................................................................32

3.6.1 Visit network camera with static IP .....................................................................................32

3.6.2 Visit network camera with dynamic IP ................................................................................34

Appendix 1 SADP Introduction.............................................................................................................37

Appendix 2 Port Map ...........................................................................................................................39

Appendix 3 Pin Definition ....................................................................................................................41

Appendix 4 Product Specification ........................................................................................................42

User Manual of Network Camera

Chapter 1 Introduction

Network camera is a kind of embedded digital surveillance product that combines the features

of both traditional analog camera and net DVS (Digital Video Server). Due to the embedded Linux

operation system and the latest Davinci hardware platform of TI, the system operates with high

scheduling efficiency. Furthermore, the firmware is burned in the flash, which makes the product

small, reliable and highly stable.

1.1 Network camera Functions and Features

Functions:

Network Function: support the TCP/IP protocols(TCP/IP,HTTP,DHCP,DNS,RTSP RTCP,PPPoE,

Furthermore,FTP,SMTP,NTP,SNMP addible),and IE browsing.

Heartbeat Function: The server can acquire real time operating performance of the network

camera through the heartbeat function.

Alarm Function: The product includes 1 channel of alarm signal input and 1 channel of alarm

on/off output, and supports motion detection, video missing, mask alarm and external alarm

input.(Get details in Specification)

Voice Talking: Support bidirectional voice talking and monomial voice broadcasting.

User Management: Support multilevel right management. The administrator can create up to

15 separate users with different right levels, which highly improves the system security.

The product offers a 10M/100M self-adaptive Ethernet interface.

Support set the parameters, browses real time videos or checks the camera performance

through software or IE, and gets external alarming and stores the compressed bit rate through

network.

Support remote upgrades and maintenance.

RS-485 supports monomial transparent channel function so that clients on remote PC can

control the serial devices.

Compression Functions:

Support 1 channel video signal and 25fps in Pal (704 × 576) ,30fps in NTSC (704 × 480) real time

H.264 video Encoding standard compression, which supports both variable bit rate and variable

frame rate; besides, you can self-define both the video quality and its compressed bit rate.

Support resolution of 4CIF (PAL:704 × 576, NTSC:704 × 480), DCIF (PAL:528 × 384, NTSC:528 ×

320), 2CIF (PAL:704 × 288, NTSC:704 × 240), CIF (PAL:352 × 288, NTSC:352 × 240),QCIF (PAL:176

× 144, NTSC:176 × 120).

Support resolution up to 1600×1200 Pixels for 2.0 megapixels Network Camera.

Support resolution up to 1280×960 Pixels for 1.3 megapixels Network Camera.

User Manual of Network Camera

Remote Control:

The product offers a 10M/100M self-adaptive Ethernet interface.

Support TCP / IP, HTTP, DNS, RTP / RTCP, PPPoE protocols.

Set the parameters, browse real time videos or check the camera performance through

software or IE, and get external alarming and store the compressed bit rate through network.

Support remote upgrades and maintenance.

RS-485 supports monomial transparent channel function so that clients on remote PC can

control the serial devices.

Support NAS storage.

1.2 Applications

This camera is ideal for remote control network applications. E.g.:

1. Network surveillance for ATM, bank counters, supermarkets and factories.

2. Remote surveillance for nursing homes, kindergartens and schools.

3. AI janitors.

4. AI building/district management systems.

5. Self-service systems of power plants.

6. Outdoor monitoring systems for bridges, tunnels and crossroad traffic.

7. Pipelining and warehouse monitoring.

8. 24-hour monitoring for road traffic.

9. Remote monitoring of forest and water resources.

10. Surveillance for airdrome, railway station, bus stop etc.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HIK VISION Sicherheitskamera Handbücher

HIK VISION

HIK VISION DS-2AE7230TI-A Bedienungsanleitung

HIK VISION

HIK VISION DS-2CV2046G0-IDW Bedienungsanleitung

HIK VISION

HIK VISION PanoVu Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD4112F-I Benutzerhandbuch

HIK VISION

HIK VISION DS-2CD2712F-I Benutzerhandbuch

HIK VISION

HIK VISION DS-2TD6267-100C4L/WY Bedienungsanleitung

HIK VISION

HIK VISION DS-2CV2G26G0-IDW Bedienungsanleitung

HIK VISION

HIK VISION IR Network Speed Dome Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD4012F-A Benutzerhandbuch

HIK VISION

HIK VISION DS-2CV2G46G0-IDW Bedienungsanleitung

HIK VISION

HIK VISION DS-2TD4668-35A4/W Bedienungsanleitung

HIK VISION

HIK VISION DS-TCL400-E Bedienungsanleitung

HIK VISION

HIK VISION NETWORK CAMERA Bedienungsanleitung

HIK VISION

HIK VISION E-series Bedienungsanleitung

HIK VISION

HIK VISION iDS-TCD403-BI Bedienungsanleitung

HIK VISION

HIK VISION DS-PDCM15PF-IR Bedienungsanleitung

HIK VISION

HIK VISION DS-2DF5220S-DE4/Ww Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2326G1-I Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE10HFT-F Bedienungsanleitung

HIK VISION

HIK VISION iDS-2CD7A86G0-IZHSY Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD7153 Bedienungsanleitung

HIK VISION

HIK VISION NETWORK CAMERA Bedienungsanleitung

HIK VISION

HIK VISION E-series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD5165G0-IZS Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung