HIK VISION DS-2TD2608-2/QA/FP Bedienungsanleitung

Thermal Opcal Bi-spectrum Network

Camera

User Manual

Legal Informaon

About this Manual

The Manual includes instrucons for using and managing the Product. Pictures, charts, images and

all other informaon hereinaer are for descripon and explanaon only. The informaon

contained in the Manual is subject to change, without noce, due to rmware updates or other

reasons. Please nd the latest version of this Manual at the Hikvision website ( hps://

www.hikvision.com/ ).

Please use this Manual with the guidance and assistance of professionals trained in supporng the

Product.

Trademarks

and other Hikvision's trademarks and logos are the properes of

Hikvision in various jurisdicons.

Other trademarks and logos menoned are the properes of their respecve owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH

ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR

PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION

BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,

OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY

RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

Thermal Opcal Bi-spectrum Network Camera User Manual

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER

PREVAILS.

Thermal Opcal Bi-spectrum Network Camera User Manual

Symbol Convenons

The symbols that may be found in this document are dened as follows.

Symbol Descripon

Danger

Indicates a hazardous situaon which, if not avoided, will or could

result in death or serious injury.

Cauon

Indicates a potenally hazardous situaon which, if not avoided, could

result in equipment damage, data loss, performance degradaon, or

unexpected results.

Note Provides addional informaon to emphasize or supplement

important points of the main text.

Thermal Opcal Bi-spectrum Network Camera User Manual

iii

Safety Instrucon

These instrucons are intended to ensure that user can use the product correctly to avoid danger

or property loss.

Laws and Regulaons

●In the use of the product, you must be in strict compliance with the electrical safety regulaons

of the naon and region.

Transportaon

●Keep the device in original or similar packaging while transporng it.

●Keep all wrappers aer unpacking them for future use. In case of any failure occurred, you need

to return the device to the factory with the original wrapper. Transportaon without the original

wrapper may result in damage on the device and the company shall not take any responsibilies.

●DO NOT drop the product or subject it to physical shock. Keep the device away from magnec

interference.

Power Supply

●Check the input voltage before powering on the device to avoid damage.

●CAUTION: If the fuse of the device can be replaced, replace it only with the same model to

reduce the risk of re or electric shock.

●If a fuse is connected to the neutral wire and a double pole/neutral fusing occurs, parts of the

device that remain energized might represent a hazard during servicing aer operaon of the

fuse.

●If the device uses a 3-prong power supply plug, it must be connected to an earthed mains

socket-outlet properly.

●Do not touch the bare components (such as the metal contacts of the inlets) and wait for at least

5 minutes, since electricity may sll exist aer the device is powered o.

●For the permanently connected device without a disconnect equipment, a readily accessible

disconnect equipment shall be incorporated into the electrical installaon of the connected

building.

●For the permanently connected device without an overcurrent protecon equipment, an

overcurrent protecon equipment shall be incorporated into the electrical installaon of the

connected building. The specicaons of the overcurrent protecon equipment shall not exceed

that of the building.

●For the permanently connected device without an all-pole mains switch, an all-pole mains switch

shall be incorporated into the electrical installaon of the connected building.

●If the device is powered by terminals connected to the power cord, ensure correct voltage and

wiring of the terminals for connecon to mains supply.

Thermal Opcal Bi-spectrum Network Camera User Manual

●Please purchase the charger by yourself. Input voltage should meet the Limited Power Source

(12 VDC, 24 VAC, or PoE(802.3af)) according to the IEC62368 standard. Please refer to technical

specicaons for detailed informaon.

●Make sure the plug is properly connected to the power socket.

●The socket-outlet shall be installed near the equipment and shall be easily accessible.

●DO NOT connect mulple devices to one power adapter, to avoid over-heang or re hazards

caused by overload.

●DO NOT touch the bare metal contacts of the inlets aer the circuit breaker is turned o.

Electricity sll exists.

●+ idenes the posive terminal(s) of equipment which is used with, or generates direct current.

- idenes the negave terminal(s) of equipment which is used with, or generates direct current.

Baery

●Risk of explosion if the baery is replaced by an incorrect type. Dispose of used baeries

according to the instrucons.

●The built-in baery cannot be dismantled. Please contact the manufacture for repair if

necessary.

●For long-term storage of the baery, make sure it is fully charged every half year to ensure the

baery quality. Otherwise, damage may occur.

●This equipment is not suitable for use in locaons where children are likely to be present.

●Improper replacement of the baery with an incorrect type may defeat a safeguard (for

example, in the case of some lithium baery types).

●DO NOT dispose of the baery into re or a hot oven, or mechanically crush or cut the baery,

which may result in an explosion.

●DO NOT leave the baery in an extremely high temperature surrounding environment, which

may result in an explosion or the leakage of ammable liquid or gas.

●DO NOT subject the baery to extremely low air pressure, which may result in an explosion or

the leakage of ammable liquid or gas.

Installaon

●This device is suitable for use above 2 m only.

●Install the device according to the instrucons in Quick Start Guide. To prevent injury, this device

must be securely aached to the installaon surface in accordance with the installaon

instrucons.

●Never place the device in an unstable locaon. The device may fall, causing serious personal

injury or death.

●The addional force shall be equal to three mes the weight of the device but not less than 50

N. The device and its associated mounng means shall remain secure during the installaon.

Aer the installaon, the device, including any associated mounng plate, shall not be damaged.

●Never place the equipment in an unstable locaon. The equipment may fall, causing serious

personal injury or death.

●This equipment is for use only with corresponding brackets. Use with other (carts, stands, or

carriers) may result in instability causing injury.

Thermal Opcal Bi-spectrum Network Camera User Manual

●The interface varies with the models. Please refer to the product datasheet for details.

●If the device needs to be wired by yourself, select the corresponding wire to supply power

according to the electric parameters labeled on the device. Strip o wire with a standard wire

stripper at corresponding posion. To avoid serious consequences, the length of stripped wire

shall be appropriate, and conductors shall not be exposed.

●Make sure that the power has been disconnected before you wire, install, or disassemble the

device.

System Security

●You acknowledge that the nature of Internet provides for inherent security risks, and our

company shall not take any responsibilies for abnormal operaon, privacy leakage or other

damages resulng from cyber aack, hacker aack, however, our company will provide mely

technical support if required.

●Please enforce the protecon for the personal informaon and the data security as the device

may be confronted with the network security problems when it is connected to the Internet.

Please contact us when the device might exist network security risks.

●Please understand that you have the responsibility to congure all the passwords and other

security sengs about the device, and keep your user name and password.

Maintenance

●If the product does not work properly, please contact your dealer or the nearest service center.

We shall not assume any responsibility for problems caused by unauthorized repair or

maintenance.

●A few device components (e.g., electrolyc capacitor) require regular replacement. The average

lifespan varies, so periodic checking is recommended. Contact your dealer for details.

●Wipe the device gently with a clean cloth and a small quanty of ethanol, if necessary.

●If the equipment is used in a manner not specied by the manufacturer, the protecon provided

by the device may be impaired.

●To reduce the risk of re, replace only with the same type and rang of fuse.

●The serial port of the equipment is used for debugging only.

Using Environment

●Make sure the running environment meets the requirement of the device. The operang

temperature shall be -40°C to 65°C (-40°F to 149°F), and the operang humidity shall be 95% or

less, no condensing.

●DO NOT expose the device to high electromagnec radiaon or dusty environments.

●DO NOT aim the lens at the sun or any other bright light.

●The equipment shall not be exposed to dripping or splashing and that no objects lled with

liquids, such as vases, shall be placed on the equipment.

●No naked ame sources, such as lighted candles, should be placed on the equipment.

●For the device with venlaon openings, the venlaon openings should not be impeded by

covering the venlaon openings with items, such as newspapers, table-cloths, and curtains.

Thermal Opcal Bi-spectrum Network Camera User Manual

The openings shall never be blocked by placing the device on a bed, sofa, rug, or other similar

surface.

●Keep a proper distance around the device for sucient venlaon.

●This device is suitable for mounng on concrete or other non-combusble surface only to avoid

re hazard.

●This equipment is not suitable for use in locaons where children are likely to be present.

●Provide a surge suppressor at the inlet opening of the equipment under special condions such

as the mountain top, iron tower, and forest.

●Burned ngers when handling the parts with symbol . Wait one-half hour aer switching o

before handling the parts.

Emergency

●If smoke, odor, or noise arises from the device, immediately turn o the power, unplug the

power cable, and contact the service center.

COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various

countries or regions, including without limitaon, the United States, European Union, United

Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your

professional legal or compliance expert or local government authories for any necessary export

license requirements if you intend to transfer, export, re-export the thermal series products

between dierent countries.

Thermal Opcal Bi-spectrum Network Camera User Manual

vii

Contents

Chapter 1 Overview .................................................................................................................... 1

1.1 Brief Descripon .................................................................................................................... 1

1.2 Funcon ................................................................................................................................. 1

Chapter 2 Device Acvaon and Accessing ................................................................................. 2

2.1 Acvate Device ...................................................................................................................... 2

2.1.1 Acvate the Device via Browser .................................................................................... 2

2.1.2 Acvate the Device via SADP ........................................................................................ 3

2.2 Login ...................................................................................................................................... 3

2.2.1 Plug-in Installaon ........................................................................................................ 3

2.2.2 Illegal Login Lock ........................................................................................................... 4

Chapter 3 Network Sengs ........................................................................................................ 5

3.1 TCP/IP ..................................................................................................................................... 5

3.1.1 Mulcast Discovery ....................................................................................................... 6

3.2 Port ........................................................................................................................................ 6

3.3 Port Mapping ......................................................................................................................... 7

3.3.1 Set Auto Port Mapping .................................................................................................. 7

3.3.2 Set Manual Port Mapping ............................................................................................. 8

3.4 Mulcast ................................................................................................................................ 8

3.5 SNMP ..................................................................................................................................... 8

3.6 Access to Device via Domain Name ....................................................................................... 9

3.7 Access to Device via PPPoE Dial Up Connecon .................................................................... 9

3.8 Set ISUP ................................................................................................................................ 10

3.9 Set Open Network Video Interface ...................................................................................... 10

3.10 Set Alarm Host ................................................................................................................... 11

3.11 Set Alarm Server ................................................................................................................ 11

3.12 Set Network Service ........................................................................................................... 11

Thermal Opcal Bi-spectrum Network Camera User Manual

viii

3.13 Set SRTP ............................................................................................................................. 12

3.14 Operate via Mobile Client .................................................................................................. 12

3.14.1 Enable Hik-Connect Service on Camera .................................................................... 13

3.14.2 Set Up Hik-Connect ................................................................................................... 14

3.14.3 Add Camera to Hik-Connect ...................................................................................... 14

Chapter 4 VCA Resource ........................................................................................................... 16

4.1 Temperature Measurement ................................................................................................. 16

4.1.1 Noce .......................................................................................................................... 16

4.1.2 Thermography Conguraon Flow Chart .................................................................... 16

4.1.3 Automac Thermography ........................................................................................... 18

4.1.4 Manual Thermography ............................................................................................... 25

4.2 Fire and Smoke Detecon .................................................................................................... 25

4.2.1 Recommended Scene ................................................................................................. 26

4.2.2 Set Fire and Smoke Detecon ..................................................................................... 26

4.2.3 Set Dynamic Fire Source Detecon ............................................................................. 28

Chapter 5 Live View .................................................................................................................. 30

5.1 Live View Parameters ........................................................................................................... 30

5.1.1 Window Division ......................................................................................................... 30

5.1.2 Live View Stream Type ................................................................................................ 30

5.1.3 Enable and Disable Live View ...................................................................................... 30

5.1.4 Start Digital Zoom ....................................................................................................... 30

5.1.5 View Previous/Next Page ............................................................................................ 31

5.1.6 Full Screen ................................................................................................................... 31

5.1.7 Light ............................................................................................................................ 31

5.1.8 Quick Set Live View ..................................................................................................... 31

5.1.9 Lens Parameters Adjustment ...................................................................................... 31

5.2 Set Transmission Parameters ............................................................................................... 32

Chapter 6 Video and Image Sengs ......................................................................................... 34

Thermal Opcal Bi-spectrum Network Camera User Manual

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HIK VISION Sicherheitskamera Handbücher

HIK VISION

HIK VISION DS-2CC102P Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2012-I Benutzerhandbuch

HIK VISION

HIK VISION DS-2CE56D0T-I2FB Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD4212F Benutzerhandbuch

HIK VISION

HIK VISION DS-2TD4166-50/V2 Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE16D8T-AIT3ZE Bedienungsanleitung

HIK VISION

HIK VISION TurboHD H0T Series Bedienungsanleitung

HIK VISION

HIK VISION PIR Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CC1181P(N)(-A) Bedienungsanleitung

HIK VISION

HIK VISION TURBO HD D3T Series Bedienungsanleitung

HIK VISION

HIK VISION iDS-TCM403-A Bedienungsanleitung

HIK VISION

HIK VISION DINOX DSR-3310 Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD3786G2T-IZS Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE12KF3T-LE Bedienungsanleitung

HIK VISION

HIK VISION TURBO HD DF7T Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2443G0-IW Series Bedienungsanleitung

HIK VISION

HIK VISION IDS-2CD7046G0-AP Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE16C0T-IRF Bedienungsanleitung

HIK VISION

HIK VISION DeepinView DS-2XM6425G0/F Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2T85FWD-I5 Bedienungsanleitung

HIK VISION

HIK VISION TURBO HD DS-2CE56D8T-IRS Bedienungsanleitung

HIK VISION

HIK VISION DS-2XC6685G0 Bedienungsanleitung

HIK VISION

HIK VISION E-series Bedienungsanleitung

HIK VISION

HIK VISION PanoVu Mini Series Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung