HIK VISION DS-2TD2628-10/QA/GLT Bedienungsanleitung

Thermal & Optical Bi-spectrum Network

Camera

Thermal & Optical Bi-spectrum Network Camera

Legal Information

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and

all other information hereinafter are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to firmware updates or other

reasons. Please find the latest version of this Manual at the Hikvision website

(https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the

Product.

Trademarks

and other Hikvision's trademarks and logos are the properties of

Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND

"WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR

A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT

WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY

RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,

VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE

TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

Thermal & Optical Bi-spectrum Network Camera

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE

LATTER PREVAILS.

Thermal & Optical Bi-spectrum Network Camera

iii

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Danger

Indicates a hazardous situation which, if not avoided, will or could

result in death or serious injury.

Caution

Indicates a potentially hazardous situation which, if not avoided,

could result in equipment damage, data loss, performance

degradation, or unexpected results.

Note

Provides additional information to emphasize or supplement

important points of the main text.

Thermal & Optical Bi-spectrum Network Camera

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger

or property loss.

Laws and Regulations

●In the use of the product, you must be in strict compliance with the electrical safety regulations

of the nation and region.

Transportation

●Keep the device in original or similar packaging while transporting it.

●Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need

to return the device to the factory with the original wrapper. Transportation without the

original wrapper may result in damage on the device and the company shall not take any

responsibilities.

●DO NOT drop the product or subject it to physical shock. Keep the device away from magnetic

interference.

Power Supply

●Please purchase the charger by yourself. Input voltage should meet the Limited Power Source

(12 VDC, 24 VAC, or PoE(802.3af)) according to the IEC62368 standard. Please refer to technical

specifications for detailed information.

●Make sure the plug is properly connected to the power socket.

●The socket-outlet shall be installed near the equipment and shall be easily accessible.

●DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards

caused by overload.

●DO NOT touch the bare metal contacts of the inlets after the circuit breaker is turned off.

Electricity still exists.

●+ identifies the positive terminal(s) of equipment which is used with, or generates direct

current. - identifies the negative terminal(s) of equipment which is used with, or generates

direct current.

Battery

●Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries

according to the instructions. Il y a risque d'explosion si la batterie est remplacée par une

batterie de type incorrect. Mettre au rebut les batteries usagées conformément aux

instructions.

●The built-in battery cannot be dismantled. Please contact the manufacture for repair if

necessary.

●For long-term storage of the battery, make sure it is fully charged every half year to ensure the

battery quality. Otherwise, damage may occur.

●This equipment is not suitable for use in locations where children are likely to be present.

●Improper replacement of the battery with an incorrect type may defeat a safeguard (for

Thermal & Optical Bi-spectrum Network Camera

example, in the case of some lithium battery types).

●DO NOT dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery,

which may result in an explosion.

●DO NOT leave the battery in an extremely high temperature surrounding environment, which

may result in an explosion or the leakage of flammable liquid or gas.

●DO NOT subject the battery to extremely low air pressure, which may result in an explosion or

the leakage of flammable liquid or gas.

Installation

●Never place the equipment in an unstable location. The equipment may fall, causing serious

personal injury or death.

●This equipment is for use only with corresponding brackets. Use with other (carts, stands, or

carriers) may result in instability causing injury.

System Security

●You acknowledge that the nature of Internet provides for inherent security risks, and our

company shall not take any responsibilities for abnormal operation, privacy leakage or other

damages resulting from cyber attack, hacker attack, however, our company will provide timely

technical support if required.

●Please enforce the protection for the personal information and the data security as the device

may be confronted with the network security problems when it is connected to the Internet.

Please contact us when the device might exist network security risks.

●Please understand that you have the responsibility to configure all the passwords and other

security settings about the device, and keep your user name and password.

Maintenance

●If the product does not work properly, please contact your dealer or the nearest service center.

We shall not assume any responsibility for problems caused by unauthorized repair or

maintenance.

●A few device components (e.g., electrolytic capacitor) require regular replacement. The average

lifespan varies, so periodic checking is recommended. Contact your dealer for details.

●Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.

●If the equipment is used in a manner not specified by the manufacturer, the protection

provided by the device may be impaired.

●To reduce the risk of fire, replace only with the same type and rating of fuse.

●The serial port of the equipment is used for debugging only.

Using Environment

●Make sure the running environment meets the requirement of the device. The operating

temperature shall be -40 °C to 65 °C (-40 °F to 149 °F), and the operating humidity shall be 95%

or less, no condensing.

●DO NOT expose the device to high electromagnetic radiation or dusty environments.

●DO NOT aim the lens at the sun or any other bright light.

●The equipment shall not be exposed to dripping or splashing and that no objects filled with

Thermal & Optical Bi-spectrum Network Camera

liquids, such as vases, shall be placed on the equipment.

●No naked flame sources, such as lighted candles, should be placed on the equipment.

●Provide a surge suppressor at the inlet opening of the equipment under special conditions such

as the mountain top, iron tower, and forest.

●Burned fingers when handling the parts with symbol . Wait one-half hour after switching off

before handling the parts.

Emergency

●If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the

power cable, and contact the service center.

COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various

countries or regions, including without limitation, the United States, European Union, United

Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your

professional legal or compliance expert or local government authorities for any necessary export

license requirements if you intend to transfer, export, re-export the thermal series products

between different countries.

Thermal & Optical Bi-spectrum Network Camera 
vii 
Contents 
Chapter 1 Overview....................................................................................................................1 
1 Brief Description....................................................................................................................1 
2 Function .................................................................................................................................1 
Chapter 2 Device Activation and Accessing .................................................................................2 
1 Activate the Device via SADP................................................................................................2 
2 Activate the Device via Browser...........................................................................................2 
3 Login.......................................................................................................................................3 
3.1 Plug-in Installation .....................................................................................................3 
3.2 Illegal Login Lock.........................................................................................................4 
Chapter 3 Temperature Measurement........................................................................................5 
1 Notice.....................................................................................................................................5 
2 Thermography Configuration Flow Chart.............................................................................6 
3 Automatic Thermography.....................................................................................................8 
3.1 Set Thermography Parameters..................................................................................8 
3.2 Set Normal Mode .......................................................................................................9 
3.3 Set Expert Mode.......................................................................................................10 
3.4 Set Thermography Rule............................................................................................11 
3.5 Point Thermography ................................................................................................12 
3.6 Line Thermography ..................................................................................................12 
3.7 Area Thermography .................................................................................................12 
3.8 Set Shielded Region..................................................................................................13 
4 Manual Thermography........................................................................................................13 
Chapter 4 Fire Source Detection ...............................................................................................14 
1 Recommended Scene..........................................................................................................14 
2 Set Fire Detection Parameters............................................................................................14 
Chapter 5 Behavior Analysis .....................................................................................................16 
1 Flow Chart of Behavior Analysis .........................................................................................16 
2 Set VCA Parameters ............................................................................................................17 
3 Calibration ...........................................................................................................................17 

Thermal & Optical Bi-spectrum Network Camera 
viii 
3.1 Calibrate Automatically ...........................................................................................17 
3.2 Calibrate Manually...................................................................................................18 
3.3 Verify the Calibration Result....................................................................................19 
4 Set Rules ..............................................................................................................................19 
5 Advanced Configuration......................................................................................................21 
Chapter 6 Event and Alarm.......................................................................................................23 
1 Set Alarm Input....................................................................................................................23 
2 Set Exception Alarm ............................................................................................................23 
3 Detect Audio Exception.......................................................................................................24 
4 Set Burning-Prevention.......................................................................................................24 
Chapter 7 Arming Schedule and Alarm Linkage.........................................................................26 
1 Set Arming Schedule ...........................................................................................................26 
2 Linkage Method Settings.....................................................................................................26 
2.1 Trigger Alarm Output ...............................................................................................26 
2.2 FTP/NAS/Memory Card Uploading .........................................................................27 
2.3 Send Email ................................................................................................................28 
2.4 Notify Surveillance Center .......................................................................................29 
2.5 Trigger Recording .....................................................................................................29 
2.6 Set Audible Alarm Output........................................................................................29 
2.7 Set Flashing Alarm Light Output..............................................................................29 
Chapter 8 Live View..................................................................................................................31 
1 Live View Parameters..........................................................................................................31 
1.1 Window Division ......................................................................................................31 
1.2 Live View Stream Type.............................................................................................31 
1.3 Enable and Disable Live View ..................................................................................31 
1.4 Start Digital Zoom ....................................................................................................31 
1.5 View Previous/Next Page ........................................................................................32 
1.6 Full Screen.................................................................................................................32 
1.7 Light ..........................................................................................................................32 
1.8 Wiper ........................................................................................................................32 
1.9 Lens Initialization .....................................................................................................32 

Thermal & Optical Bi-spectrum Network Camera 
ix 
1.10 Auxiliary Focus........................................................................................................32 
1.11 Quick Set Live View ................................................................................................32 
1.12 Lens Parameters Adjustment.................................................................................33 
2 Set Transmission Parameters .............................................................................................33 
Chapter 9 Video and Audio.......................................................................................................35 
1 Video Settings......................................................................................................................35 
1.1 Stream Type..............................................................................................................35 
1.2 Video Type................................................................................................................35 
1.3 Resolution.................................................................................................................36 
1.4 Bitrate Type and Max. Bitrate .................................................................................36 
1.5 Video Quality............................................................................................................36 
1.6 Frame Rate ...............................................................................................................36 
1.7 Video Encoding.........................................................................................................36 
1.8 Smoothing.................................................................................................................37 
1.9 Display VCA Info.......................................................................................................38 
1.10 Audio Settings ........................................................................................................38 
1.11 Two-way Audio.......................................................................................................39 
1.12 Set ROI ....................................................................................................................39 
2 Display Settings ...................................................................................................................40 
2.1 Image Adjustment....................................................................................................40 
2.2 Image Adjustment (Thermal Channel) ....................................................................40 
2.3 Exposure Settings.....................................................................................................41 
2.4 Day/Night Switch .....................................................................................................41 
2.5 Set Supplement Light ...............................................................................................42 
2.6 BLC ............................................................................................................................42 
2.7 WDR..........................................................................................................................42 
2.8 White Balance ..........................................................................................................43 
2.9 DNR...........................................................................................................................43 
2.10 Defog.......................................................................................................................44 
2.11 Gray Scale ...............................................................................................................44 
2.12 Set Palette ..............................................................................................................44 

Andere Handbücher für DS-2TD2628-10/QA/GLT

Inhaltsverzeichnis

Andere HIK VISION Sicherheitskamera Handbücher

HIK VISION

HIK VISION DS-2CD7255F-EIZHS Bedienungsanleitung

HIK VISION

HIK VISION TURBO HD DS-2CE5AD0T-VPIT3F Bedienungsanleitung

HIK VISION

HIK VISION PanoVu Mini Series Bedienungsanleitung

HIK VISION

HIK VISION 5 Inch Network High Speed Dome Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE16H5T-IT Bedienungsanleitung

HIK VISION

HIK VISION iDS-2CD8426G0-F-I Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD4A26FWD-IZSP Bedienungsanleitung

HIK VISION

HIK VISION DS-2DT6223-AELY Bedienungsanleitung

HIK VISION

HIK VISION DS-2DF5276 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD5AC5G0-IZS Bedienungsanleitung

HIK VISION

HIK VISION DS-2DF1-512 Bedienungsanleitung

HIK VISION

HIK VISION DS-2TD8166-150ZH2F/V2 Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE12D0T-PIRXF Bedienungsanleitung

HIK VISION

HIK VISION NETWORK CAMERA Bedienungsanleitung

HIK VISION

HIK VISION TURBO HD H0T Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD762MF-FBH Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE56D1T-AVPIR3 Bedienungsanleitung

HIK VISION

HIK VISION TURBO HD DS-2CE5AC5T-AVPIT3Z Bedienungsanleitung

HIK VISION

HIK VISION DS-2SE7C432MW-AEB Bedienungsanleitung

HIK VISION

HIK VISION DS-2CC 2D9T Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD51C5G0-IZS Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE10DFT-F Bedienungsanleitung

HIK VISION

HIK VISION DS?2CC1173P?VF Bedienungsanleitung

HIK VISION

HIK VISION DS-2DE5225IW-AE Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung