HIK VISION THC-B227-LMS Bedienungsanleitung

HiLook Series Dual-Light Bullet

& Turret Camera

User Manual

Thank you for purchasing our product. If there are any

questions, or requests, do not hesitate to contact the

dealer.

This manual applies to the models below:

Type

Model

Note

Type I Camera

THC-B227-LMS

2MP model

THC-B257-LMS

3K model

Type II Camera

THC-B127-LPS

2MP model

THC-B127-LMS

THC-B157-LPS

3K model

THC-B157-LMS

Type III

Camera

THC-T127-LPS

2MP model

THC-T157-LPS

3K model

Type IV

Camera

THC-T127-LMS

2MP model

THC-T157-LMS

3K model

Type V

Camera

THC-T227-LMS

2MP model

THC-T257-LMS

3K model

This manual may contain several technical mistakes or

printing errors, and the content is subject to change

without notice. The updates will be added to the new

version of this manual. We will readily improve or

update the products or procedures described in the

manual.

01000020220507

Legal Information

About this Manual

Pictures, charts, images and all other information

hereinafter are for description and explanation only.

The information contained in the Manual is subject to

change, without notice, due to firmware updates or

other reasons. Please find the latest version in the

company website (https://www.hikvision.com/). Please

use this user manual under the guidance of

professionals.

Trademarks

and other Hikvision's trademarks and logos are

the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the

properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE

LAW, THIS MANUAL AND THE PRODUCT DESCRIBED,

WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE

PROVIDED "AS IS" AND "WITH ALL FAULTS AND

ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS

FOR A PARTICULAR PURPOSE. THE USE OF THE

PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT

WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,

CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF

BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS

OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF

DOCUMENTATION, WHETHER BASED ON BREACH OF

CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE

USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR

LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE

INTERNET PROVIDES FOR INHERENT SECURITY RISKS,

AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES

FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR

OTHER DAMAGES RESULTING FROM CYBER-ATTACK,

HACKER ATTACK, VIRUS INFECTION, OR OTHER

INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL

PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE

WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY

RESPONSIBLE FOR ENSURING THAT YOUR USE

CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU

ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A

MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF

THIRD PARTIES, INCLUDING WITHOUT LIMITATION,

RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS,

OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY

PROHIBITED END-USES, INCLUDING THE DEVELOPMENT

OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION,

THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR

BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE

CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR

UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF

HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS

MANUAL AND THE APPLICABLE LAW, THE LATTER

PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modification not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

FCC compliance: This equipment has been tested and

found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection

against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired

operation.

EU Conformity Statement

This product and - if applicable - the

supplied accessories too are marked with

"CE" and comply therefore with the

applicable harmonized European

standards listed under the Low Voltage Directive

2014/35/EU, the EMC Directive 2014/30/EU, the RoHS

Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products

marked with this symbol cannot be

disposed of as unsorted municipal waste in

the European Union. For proper recycling,

return this product to your local supplier

upon the purchase of equivalent new

equipment, or dispose of it at designated collection

points. For more information see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a

battery that cannot be disposed of as

unsorted municipal waste in the European

Union. See the product documentation for

specific battery information. The battery is

marked with this symbol, which may

include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery

to your supplier or to a designated collection point. For

more information, see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A)

standards requirements.

Warning

This is a class A product. In a domestic environment this

product may cause radio interference in which case the

user may be required to take adequate measures.

Safety Instruction

These instructions are intended to ensure that user can

use the product correctly to avoid danger or property

loss.

The precaution measure is divided into “Warnings” and

“Cautions”.

Warnings: Serious injury or death may occur if any of

the warnings are neglected.

Cautions: Injury or equipment damage may occur if any

of the cautions are neglected.

Warnings

In the use of the device, you must be in strict

compliance with the electrical safety regulations of

the nation and region.

Input voltage should meet both the SELV (Safety Extra

Low Voltage) and the Limited Power Source with 12

VDC according to the IEC60950-1 standard and

IEC62368-1 standard. Refer to technical specifications

for detailed information.

The socket-outlet shall be installed near the

equipment and shall be easily accessible.

An all-pole mains switch shall be incorporated in the

electrical installation of the building.

Do not connect multiple devices to one power

adapter to avoid over-heating or a fire hazard caused

by overload.

Make sure that the plug is firmly connected to the

power socket.

Make sure that the device is firmly fixed if wall

mounting or ceiling mounting is adopted.

If smoke, odor or noise rise from the device, turn off

the power at once and unplug the power cord, and

then contact the service center.

Never attempt to disassemble the camera by

unprofessional personal.

Cautions

No naked flame sources, such as lighted candles,

should be placed on the equipment.

Install the equipment according to the instructions in

this manual.

To prevent injury, this equipment must be securely

attached to the wall in accordance with the

installation instructions.

Do not drop the camera or subject it to physical

shock.

Do not touch senor modules with fingers.

Do not place the camera in extremely hot, cold (the

operating temperature shall be -40°C to 60°C), dusty

or damp locations, and do not expose it to high

electromagnetic radiation.

If cleaning is necessary, use clean cloth with a bit of

ethanol and wipe it gently.

Warnings Follow

these safeguards to

prevent serious injury

or death.

Cautions Follow these

precautions to prevent

potential injury or

material damage.

Do not aim the camera at the sun or extra bright

places.

The sensor may be burned out by a laser beam, so

when any laser equipment is in using, make sure that

the surface of sensor will not be exposed to the laser

beam.

Do not expose the device to high electromagnetic

radiation or extremely hot, cold, dusty or damp

environment.

To avoid heat accumulation, good ventilation is

required for the operating environment.

Keep the camera away from liquid while in use for

non-water-proof device.

While in delivery, the camera shall be packed in its

original packing, or packing of the same texture.

The beam of the light at the distance of 200 mm is

classified as Risk Group 1 (RG1). Possible hazardous

optical radiation emitted from this product.

DO NOT stare at operating light source. May be

harmful to the eyes.

Wear appropriate eye protection or turn on the

supplement light only at a safe distance (0.3 m) or in

the area that is not directly exposed to the light when

installing or maintaining the device.

1Introduction

1.1 Product Features

The main features are as follows:

High performance CMOS sensor

OSD menu with configurable parameters

Smart light

3-axis adjustment

Hybrid supplement light with IR and white light

1.2 Overview

1.2.1 Overview of Type I Camera

Main Body

Switch Button

Video Cable

Power Cord

Lens

Bracket

Figure 1-1 Overview of Type I Camera

Note:

Press and hold the switch button for 5 seconds to

switch the video output. Four kinds of video outputs

are available: TVI, AHD, CVI, and CVBS.

1.2.2 Overview of Type II Camera

Switch Button

Video Cable

Power Cord

Lens Bracket

Microphone Main Body

Figure 1-2 Overview of Type II Camera

Note:

Press and hold the switch button for 5 seconds to

switch the video output. Four kinds of video outputs

are available: TVI, AHD, CVI, and CVBS.

1.2.3 Overview of Type III Camera

Enclosure

Main Body

Base Switch Button

Power Cord

Video Cable

Microphone

Figure 1-3 Overview of Type III Camera

Note:

Press and hold the switch button for 5 seconds to

switch the video output. Four kinds of video outputs

are available: TVI, AHD, CVI, and CVBS.

1.2.4 Overview of Type IV Camera

Trim Ring

Enclosure

Base

Main Body

Switch Button

Video Cable

Power Cord

Tightening Screw

Clip Plate

Microphone

Figure 1-4 Overview of Type IV Camera

Note:

Press and hold the switch button for 5 seconds to

switch the video output. Four kinds of video outputs

are available: TVI, AHD, CVI, and CVBS.

1.2.5 Overview of Type V Camera

Trim Ring

Enclosure

Base

Main Body

Power Cord

Switch Button

Video Cable

Figure 1-5 Overview of Type V Camera

Note:

Press and hold the switch button for 5 seconds to

switch the video output. Four kinds of video outputs

are available: TVI, AHD, CVI, and CVBS.

2Installation

Before you start

Make sure that the device in the package is in good

condition and all the assembly parts are included.

Make sure that all the related equipment is power-off

during the installation.

Check the specification of the products for the

installation environment.

Check whether the power supply is matched with

your power output to avoid damage.

Make sure the wall is strong enough to withstand

three times the weight of the camera and the mount.

If the product does not function properly, contact

your dealer or the nearest service center. DO NOT

disassemble the camera for repair or maintenance by

yourself.

2.1 Installation of Type I & II Camera

2.1.1 Ceiling/Wall Mounting without Junction Box

Ceiling mounting and wall mounting are similar.

Following steps take ceiling mounting as an example.

Steps:

1. Paste the drill template (supplied) to the installation

location.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

3. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

4. Secure the camera to ceiling with three PA4 × 25

screws (supplied).

Figure 2-1 Secure the Camera to the Ceiling

5. Connect the cables.

6. Power on the camera to adjust the view angle

according to the figure below.

Trim Ring

Adjusting Screw

Pan Position

[0°to 360°]

Tilt Position

[0°to 180°]

Adjusting Screw

Rotation Position

[0°to 360°]

Figure 2-2 3-Axis Adjustment

2.1.2 Ceiling/Wall Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.

Ceiling mounting and wall mounting are similar.

Following steps take wall mounting as an example.

Steps:

1. Paste the drill template for junction box to the

installation location.

2. (Optional) For cement wall, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

3. (Optional) Drill the cable hole, when the cables are

routed through the wall.

4. Take apart the junction box.

5. Fix the camera to the junction box cover with three

PM4 × 10 screws.

Figure 2-3 Fix the Camera to the Junction Box Cover

6. Secure the junction box body on the wall with three

PA4 × 25 screws (supplied).

Figure 2-4 Secure the Junction Box on the Wall

7. Route the cables through the bottom cable hole or

side cable hole of the junction box and connect the

cables.

8. Fix the junction box cover on its body with three

PM3 × 16 L6 screws.

Figure 2-5 Fix the Cover to Its Body

9. Refer to Step 6 of 2.1.1 Ceiling/Wall Mounting

without Junction Box to finish installation.

2.2 Installation of Type III Camera

2.2.3 Ceiling Mounting Without Junction Box

Steps:

1. Rotate the camera to align the mark with the notch.

Insert a coin or another tool into the notch, and

press down to dissemble the camera.

Notch

Mark

Coin

Figure 2-6 Dissemble the Camera

2. Paste the drill template (supplied) to the place

where you want to install the camera.

3. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

4. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

5. Use two PA4 × 25 screws (supplied) to secure the

base to the ceiling.

Figure 2-7 Secure the Base to the Ceiling

6. Align the notch with the mark to install the camera

back to the base and secure it.

Figure 2-8 Install the Camera Back

7. Connect the cables.

8. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

Pan Position

[0°to 360°]

Rotation Position

[0°to 360°]

Tilt Position

[0°to 75°]

Figure 2-9 3-Axis Adjustment

1). Rotate the enclosure to adjust the pan position

[0° to 360°].

2). Move the main body up and down to adjust the

tilt position [0° to 75°].

3). Rotate the main body to adjust the rotation

position [0° to 360°].

2.2.4 Ceiling Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.

Steps:

1. Loosen screws to take apart the junction box.

2. Paste the drill template for junction box to the place

where you want to install the camera.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HIK VISION Sicherheitskamera Handbücher

HIK VISION

HIK VISION DS-2SE7C432MW-AEB Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2355FWD-I Bedienungsanleitung

HIK VISION

HIK VISION 4 Inch High Speed Dome Bedienungsanleitung

HIK VISION

HIK VISION DS-2CZ2114P Bedienungsanleitung

HIK VISION

HIK VISION DS-MH2211 Bedienungsanleitung

HIK VISION

HIK VISION HiLook THC-B129-LPS Bedienungsanleitung

HIK VISION

HIK VISION DS-2DE7A412MCG-EB Bedienungsanleitung

HIK VISION

HIK VISION HiLook IK-4142B-MH/W Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD8253F-EI Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2412F-I Bedienerhandbuch

HIK VISION

HIK VISION DS-2CE16H1T-IT3Z Bedienungsanleitung

HIK VISION

HIK VISION TURBO HD TVI-AC334-FD4/FD4-2.8 Bedienungsanleitung

HIK VISION

HIK VISION HiWatch Series Installations- und Benutzerhandbuch

HIK VISION

HIK VISION DS-2XC6685G0 Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE56D1T-IR3Z Bedienungsanleitung

HIK VISION

HIK VISION DS-2XE6825G0-IZHS Bedienungsanleitung

HIK VISION

HIK VISION TURBO HD D8T PIR Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2TD2608-2/QA/FP Bedienungsanleitung

HIK VISION

HIK VISION DS-2TD2137-7P Bedienungsanleitung

HIK VISION

HIK VISION DS-2AE7225TI-A Bedienungsanleitung

HIK VISION

HIK VISION DS-2DE2204IW-DE3/W S6 Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD1T23G0-I Bedienungsanleitung

HIK VISION

HIK VISION DSHD21E2 Bedienungsanleitung

HIK VISION

HIK VISION DS?2CC1102P(N)(?A) Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung