HIK VISION DS-PEA101 Series Bedienungsanleitung

Non-Visible Panic Alarm Station

Configuration Guide

Non-Visible Panic Alarm Station Configuration Guide

Legal Information

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and

all other information hereinafter are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to firmware updates or other

reasons. Please find the latest version of this Manual at the Hikvision website

(https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the

Product.

Trademarks

and other Hikvision's trademarks and logos are the properties of

Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND

“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR

A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT

WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,

AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY

LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

Non-Visible Panic Alarm Station Configuration Guide

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER

PREVAILS.

Non-Visible Panic Alarm Station Configuration Guide

iii

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Danger

Indicates a hazardous situation which, if not avoided, will or could

result in death or serious injury.

Caution

Indicates a potentially hazardous situation which, if not avoided,

could result in equipment damage, data loss, performance

degradation, or unexpected results.

Note

Provides additional information to emphasize or supplement

important points of the main text.

Non-Visible Panic Alarm Station Configuration Guide

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too

are marked with "CE" and comply therefore with the

applicable harmonized European standards listed under the

EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU

2012/19/EU (WEEE directive): Products marked with this

symbol cannot be disposed of as unsorted municipal waste in

the European Union. For proper recycling, return this product

to your local supplier upon the purchase of equivalent new

equipment, or dispose of it at designated collection points. For

more information see: www.recyclethis.info

Non-Visible Panic Alarm Station Configuration Guide 
v 
Contents 
Chapter 1 Overview....................................................................................................................1 
Chapter 2 Activation...................................................................................................................2 
1 Activate via SADP ..................................................................................................................2 
2 Activate Device via Client Software......................................................................................3 
Chapter 3 Remote Settings.........................................................................................................5 
1 Device Management .............................................................................................................5 
1.1 Add Device to the Client Software ............................................................................5 
1.2 Edit Network Parameters...........................................................................................6 
2 Network Configuration .........................................................................................................6 
2.1 Basic Settings..............................................................................................................6 
2.2 Set DNS .......................................................................................................................8 
2.3 Set NAT .......................................................................................................................8 
2.4 Set Alarm Center ......................................................................................................10 
2.5 Set SIP .......................................................................................................................11 
2.6 Set Hik-Connect........................................................................................................13 
2.7 Access the Platform..................................................................................................14 
2.8 Set Intercom Parameters .........................................................................................15 
2.9 Set Integrate Protocol Parameters..........................................................................16 
3 Alarm Settings .....................................................................................................................17 
3.1 Set Zone....................................................................................................................17 
3.2 Set Relay ...................................................................................................................19 
3.3 Set Call Waiting ........................................................................................................20 
3.4 Set Voice Prompt......................................................................................................21 
4 Alarm Management ............................................................................................................23 
4.1 Manage Relay...........................................................................................................23 
4.2 Manage Audio Input/Output...................................................................................23 
4.3 Manage Siren............................................................................................................24 
4.4 Manage Audio File....................................................................................................25 
5 Event Settings......................................................................................................................26 

Non-Visible Panic Alarm Station Configuration Guide 
vi 
5.1 Set Audio Exception Detection................................................................................26 
6 Video & Audio Settings .......................................................................................................28 
6.1 Video & Audio Settings ............................................................................................28 
6.2 Set Display ................................................................................................................30 
6.3 Set Image Parameters..............................................................................................31 
6.4 Set Intercom Audio ..................................................................................................31 
7 System Settings ...................................................................................................................32 
7.1 Set Time....................................................................................................................32 
7.2 Set System Parameters ............................................................................................33 
7.3 Set Security...............................................................................................................33 
7.4 Set Password ............................................................................................................34 
7.5 Set User.....................................................................................................................35 
7.6 Search for Log...........................................................................................................35 
7.7 Maintain the System................................................................................................36 
7.8 Check Video & Audio Status ....................................................................................38 
7.9 Security Audit Log ....................................................................................................39 
8 Check Status ........................................................................................................................40 
8.1 Check Zone Status ....................................................................................................40 
8.2 Check Relay Status ...................................................................................................40 
8.3 Check Siren Status....................................................................................................40 

Non-Visible Panic Alarm Station Configuration Guide

Chapter 1 Overview

Description

DS-PEA101 series of active panic alarm station has 1-channel alarm input and 1-channel alarm

output. It supports center call, two-way video intercom, real-time monitoring, first time alarm help

and audio anomaly detection. It can provide faster and more effective services for the society,

effectively deter criminals, reassure the public, and stabilize the society.

The device is mainly used in hospitals, scenic spots, communities and prisons etc.

Non-Visible Panic Alarm Station Configuration Guide

Chapter 2 Activation

In order to protect personal security and privacy and improve the network security level, you

should activate the device the first time you connect the device to a network.

2.1 Activate via SADP

SADP is a tool to detect, activate and modify the IP address of the device over the LAN.

Before You Start

●Get the SADP software from the supplied disk or the official website

http://www.hikvision.com/en/, and install the SADP according to the prompts.

●The device and the PC that runs the SADP tool should be within the same subnet.

The following steps show how to activate a device and modify its IP address. For batch activation

and IP addresses modification, refer to User Manual of SADP for details.

Steps

1. Run the SADP software and search the online devices.

2. Find and select your device in online device list.

3. Input new password (admin password) and confirm the password.

Caution

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of

your own choosing (using a minimum of 8 characters, including upper case letters, lower case

letters, numbers, and special characters) in order to increase the security of your product. And

we recommend you reset your password regularly, especially in the high security system,

resetting the password monthly or weekly can better protect your product.

4. Click Activate to start activation.

Figure 2-1 SADP Page

Non-Visible Panic Alarm Station Configuration Guide

Status of the device becomes Active after successful activation.

5. Modify IP address of the device.

1) Select the device.

2) Change the device IP address to the same subnet as your computer by either modifying the IP

address manually or checking Enable DHCP.

3) Input the admin password and click Modify to activate your IP address modification.

2.2 Activate Device via Client Software

Before You Start

●Get the iVMS-4200 client software from the supplied disk or the official website

http://www.hikvision.com/en/. Install the software by following the prompts.

●Get the Guarding Vision client software from the supplied disk. Install the software by following

the prompts.

●The device and the PC that runs the software should be in the same subnet.

Steps

1. Run the client software.

2. Optional: Click , select the Cloud P2P Region, and login the Cloud P2P account.

Note

●For the first use, you need to register a cloud P2P account.

●After logging in, you can store your device on the cloud.

3. Enter Device Management → Device in the Maintenance and Management list.

4. Click Online Device.

5. Check the device status from the online device list, and select an inactive device.

6. Click Activate.

7. Create and confirm the admin password of the device.

Caution

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of

your own choosing (using a minimum of 8 characters, including upper case letters, lower case

letters, numbers, and special characters) in order to increase the security of your product. And

we recommend you reset your password regularly, especially in the high security system,

resetting the password monthly or weekly can better protect your product.

8. Click OK to start activation.

Device status will change to Active after successful activation.

9. Edit IP address of the device.

1) Select a device and click on the online device list.

Inhaltsverzeichnis

Andere HIK VISION Sicherheitssystem Handbücher

HIK VISION

HIK VISION DS-PEA22-F Bedienungsanleitung

HIK VISION

HIK VISION DS-K3B802BX Series Bedienungsanleitung

HIK VISION

HIK VISION DS-PS1-I-WB Bedienungsanleitung

HIK VISION

HIK VISION MV-PD030001-01 Bedienungsanleitung

HIK VISION

HIK VISION DS-MI9605-GA Series Bedienungsanleitung

HIK VISION

HIK VISION DS-PWA32-HR Bedienungsanleitung

HIK VISION

HIK VISION DS-PEA12-P/ZJ Bedienungsanleitung

HIK VISION

HIK VISION DS-PEA1-21 Bedienungsanleitung

HIK VISION

HIK VISION 607 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-MI9605-GA Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2TD6537T-50H4LX/W Bedienungsanleitung

HIK VISION

HIK VISION DS-K1T604M Bedienungsanleitung

HIK VISION

HIK VISION DS-PD1-EB-WS2 Bedienungsanleitung

HIK VISION

HIK VISION DS-PEA Series Bedienungsanleitung

HIK VISION

HIK VISION DS-PWA96-DB-WE Bedienungsanleitung

HIK VISION

HIK VISION AX PRO Series Installationsanleitung

HIK VISION

HIK VISION DS-PEA102S Bedienungsanleitung

HIK VISION

HIK VISION DS-PEA102S Bedienungsanleitung

HIK VISION

HIK VISION NB V6 Bedienungsanleitung

HIK VISION

HIK VISION ITS Gebrauchsanweisung

HIK VISION

HIK VISION DS-K2M060 Bedienungsanleitung

HIK VISION

HIK VISION Pyronix Euro Mini Bedienungsanleitung

HIK VISION

HIK VISION DS-PS1-I-WA Bedienungsanleitung

HIK VISION

HIK VISION DS-19A08-BNG Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung