HIK VISION Pyronix Enforcer V10 Service-Handbuch

Wireless Alarm System

Extended User Guide

Alarm Panel

Time 10:09 c

Enforcer V!0 User Guide

Contents

Introduction 5

ProControl+ 7

Setting Devices 8

The Wireless Panel Keypad and Additional Keypads 8

Proximity Tag Readers 8

Internal 8

External 9

Wireless Keyfobs 9

Locking the Keyfob 9

Quick Setting 10

The Wireless Arming Station 10

Setting and Unsetting 10

Activating the Outputs 10

Using Predictive Text 10

Predictive Text 11

Setting the System 11

Using a PIN Code or Proximity Tag 11

Using the Wireless Keyfob 12

Unsetting the System 12

Using a PIN Code or Proximity Tag 12

Using the Wireless Keyfob 13

Unsetting after an Alarm 13

Using a PIN Code or Proximity Tag 13

Using the Wireless Keyfob 13

Using Proximity Tag Readers 14

Setting and Unsetting 14

Entry Control 14

External Proximity Reader Instructions 15

Anti-Code & Engineer Restore Facilities 15

Enforcer V10 User Guide

Anti-Code 15

Engineer Reset 16

Fault Indications & Unable to Set 16

Fault Indications 16

Control Panel 16

Unable to Set 16

Control Panel Indication 16

Keyfob Indication 16

Advanced Functions 17

Chime 17

Omitting Inputs 17

Keypad Hold Up 17

Master Manager Mode Overview 18

Entering Master Manager Mode 19

Exiting Master Manager Mode 20

Master Manager Mode Options 20

Set Time and Date 20

Operate User Outputs 21

Omit Inputs 21

Edit Users 21

Button Actions 22

Flexi-set 22

Adding a New User 22

Deleting a User 24

Change User 24

Change Master Manager Code 24

Review Logs 24

Set Up App Data 25

Wi-Fi Setup 26

SMS/Voice Phonebook 27

Walk Test 27

Enforcer V!0 User Guide

Siren Test 28

Dial Out Menu 28

Allow Engineer Menu 28

Block UDL Set 29

System Sounds Demo 29

ProControl+ Smart Device Application 30

Getting Started 30

Downloading the App 30

Registering to the ProControl+ Service 30

Adding a Control Panel to ProControl+ 31

Basic Controls 32

Connecting to the Panel 32

Intruder Alarm Homescreen 33

Advanced Controls 34

History 34

Setting/Unsetting Logs 35

Acknowledging a Voice Call 35

Certication 36

Installation Information 37

Engineer Information 37

Input Table 38

Users 40

Standard Users 40

Guard, Duress and Dial Back Users 43

Enforcer V10 User Guide

Introduction

Two-Way Wireless Security Protects Your Family and Property Without

Compromise.

This wireless alarm system has been designed with your security in mind; with quick and

easy installation and minimal maintenance, this system protects your home or property with

a multitude of unique features.

Taking full advantage of the innovative two-way wireless technology, the wireless devices

on this system are constantly communicating with each other, using High Security Wireless

Encryption Protocol.

Compared to a conventional one-way wireless system where devices can be ‘asleep’ for up

to ve minutes at a time, therefore compromising your security, this wireless alarm system

ensures your safety at your home or oce at any time.

This wireless alarm system has been engineered to be secure, reliable and easy to use. It

includes the following features:

Battery Monitoring/Saving

Advanced technology preserves the battery life of each wireless device. However, the system

informs you when a battery needs replacing up to a month in advance before the device

stops working. This key feature gives you enough time to change the battery in the specic

device. Conventional wireless alarm systems may not give you a low battery warning signal,

meaning that devices could stop working, leaving your environment unprotected.

User Friendly Keyfobs

The fully two way wireless keyfob allows you to see the status of the control unit via three

colour LEDs:

System set: When the system is set a red LED will illuminate

System unset: When the system is unset a green LED will illuminate

System fault: When the system is in fault condition an amber LED will illuminate.

It is possible to allocate dierent functions to each keyfob such as setting/unsetting dierent

areas, activating outputs, requesting system status, and activating panic alarms. Up to 32

wireless keyfobs can be added to the wireless alarm system. Each wireless keyfob has its own

user ID which can be reported to the ARC and stored into the event log of the control panel

individually. The keyfob also allows you to set/unset every area individually, giving you total

control of your system.

User Automation Outputs

User automation outputs gives you the option to operate up to 20 devices such as gates,

lights, sprinklers, etc. via your keypad or remotely via your keyfob, extending the use of your

security system

Enforcer V!0 User Guide

Push and Voice Notications

Receive instant push notications from the control panel to ProControl+ enabling you

to react quicker to alarms. Combine the installation with Full HD Wi-Fi cameras for video

verication as soon as the notication is received for peace of mind and higher security of

your property.

ProControl+ also delivers voice notications alongside the push notications simultaneously

to make sure you never miss an incident, whether this be your alarm unsetting, perimeter

breached or panic alarm you will be the rst to know.

SMS Text Notications

Receive notications via SMS text messages of any incidents within your home in real

time. This can be programmed to send a notication in dierent situations: System is set or

unset: Notication that your child has returned home from school safely. Alarm activation:

Notication that the alarm has been triggered, allowing you to monitor your home from

anywhere in the world.

This wireless alarm system has 4 areas in which may be set up in the following way:

Area A: Full set of the house

Area B: Downstairs unset. Upstairs set.

Area C: Garage set. Rest of house unset.

Your engineer will be able to design the system according to your needs.

Enforcer V10 User Guide

ProControl+

Connect to your home from anywhere

AES-256

Encryption

Set and unset your system

View your system status in real time, including: alarm, CO and

smoke detectors

Customise and receive push notifications from your system

Have instant access to your events and history log

Control appliances such as lights, garage doors, gates and

blinds

All using an encrypted, highly secure system, for extra peace

of mind that your family and home is safe and secure

https://apple.co/2N4DF51https://play.google.com/store/apps/

details?id=com.mcu.Pyronix&hl=en

Enforcer V!0 User Guide

Setting Devices

The Wireless Panel Keypad and Additional Keypads

Additional wired keypads may also be connected

to the wireless control panel, please ask your

engineer for more information.

a= Exits the Master Manager menu and

selects Area A when setting.

b= Moves backwards in the Master Manager

menu and selects Area B when setting.

c= Enables chime, displays additional

information in the event log, and selects Area C

when setting.

d= Moves forward in the log, scrolls between options, enters

the Master Manager menu and selects Area D when setting.

fp= Not used.

[]= Directional buttons and enables/disables functions.

f= Enters menus and accepts programming preferences.

h= Cancels items, resets the panel and moves to next item in a menu item.

Proximity Tag Readers

Tag readers can be used for setting/unsetting, entry control or access control. Ask your

engineer for more details.

Internal

Proximity area (please present your tag here)

:Alert LED

;Alarm LED

<Tamper LED

=Fault LED

>Unset LED

Enforcer V10 User Guide

External

To set/unset the system using the External Tag Reader, present a

pre-programmed tag to the centre of the reader.

The reader will display the system status:

Green LED means the system is unset.

Red LED means the system is set.

Present the tag again within 10 seconds and the system will set

or unset.

The system will then set depending on the type of exit mode programmed (nal door, timed

or push to set).

Wireless Keyfobs

The wireless keyfob has four buttons that may be programmed for specic purposes, these

options are programmed in the ‘EDIT USERS?’section.

Locking the Keyfob

All four buttons on the keyfob may be locked so that any accidental presses will not aect

your wireless alarm system. For example, this protects the buttons from being pressed

accidentally if a keyfob is in someone’s pocket.

OR OR

5 seconds 5 seconds

The buttons can be customised to operate as desired. The table below gives the defaults of

how each button is programmed.

LOCK When pressed, the Area A will start to set.

UNLOCK When pressed, the wireless alarm system will unset any area that is

already set.

I BUTTON When pressed, the Area B will start to set.

II BUTTON

When pressed, if the GREEN LED is shown then the wireless alarm

system will be unset. If the RED LED is shown then the wireless alarm

system will be set.

Enforcer V!0 User Guide

Quick Setting

If one of the buttons is programmed as ‘Set Area’, the wireless alarm system can be set by

pressing the programmed button on the keyfob. The keypad will then start to count down

the exit time, wait for a ‘nal door’ to be opened and closed or wait for a Push to Set (PTS)

button to be pressed (depending what exit mode is programmed as by the engineer).

Once the alarm panel is in this‘setting’stage, it is possible to‘quick set’the system by pressing

the same button again; this will reduce the time to set to‘immediate setting’. The alarm panel

will revert to the normal display with the time showing, but a beep will be heard conrming

the system has set.

The Wireless Arming Station

Up to four wireless arming stations can be programmed on to the wireless alarm system.

Setting and Unsetting

If you are using a proximity tag to set or unset the

wireless alarm system, press any key rst (except

d), to ‘wake’ the wireless arming system before

presenting a tag.

Alternatively, if a user code is being used, then

enter the code. The wireless arming station will

automatically‘wake’once the rst button is pressed.

After a tag or code has been activated, choose the

area to set by pressing the a, b, cor d.

The key will illuminate indicating that area has been

chosen to be set. Once conrmed, press the t

key.

To unset, simply enter the user code.

OP 1 OP 2 OP 3OP 4

“BEEP”

OP 1 OP 2 OP 3OP 4

Activating the Outputs

Press the dkey and enter the Master Manager

code.

The keys 123 and 4will illuminate.

The OP1–4 LEDs will illuminate once the 1-4

numeric keys have been pressed. Once illuminated,

it signies that the output has triggered. Press the

key again to deactivate the output.

OP 1 OP 2 OP 3OP 4

Using Predictive Text

Inhaltsverzeichnis

Andere HIK VISION Sicherheitssystem Handbücher

HIK VISION

HIK VISION DS-PWA32-K Bedienungsanleitung

HIK VISION

HIK VISION 607 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-19A08-BNG Bedienungsanleitung

HIK VISION

HIK VISION EKI-K41B44W Bedienungsanleitung

HIK VISION

HIK VISION AX PRO Bedienungsanleitung

HIK VISION

HIK VISION DS-9600NI-ST Series Bedienungsanleitung

HIK VISION

HIK VISION Pyronix Euro Mini Bedienungsanleitung

HIK VISION

HIK VISION DS-KD8003-IME1 Bedienungsanleitung

HIK VISION

HIK VISION Blazer Express 16 Bedienungsanleitung

HIK VISION

HIK VISION DS-PHA20-P Bedienungsanleitung

HIK VISION

HIK VISION DS-PEA Series Bedienungsanleitung

HIK VISION

HIK VISION AX PRO DS-PWA64-L-WE Bedienungsanleitung

HIK VISION

HIK VISION AX HYBRID PRO Bedienungsanleitung

HIK VISION

HIK VISION AX PRO Series Installationsanleitung

HIK VISION

HIK VISION AX Series Bedienungsanleitung

HIK VISION

HIK VISION DS-PK-LRT Bedienungsanleitung

HIK VISION

HIK VISION Castle/Pyronix Euro 280 Bedienungsanleitung

HIK VISION

HIK VISION DS-PD1-EB-WS2 Bedienungsanleitung

HIK VISION

HIK VISION DS-MI9605-GA Series Bedienungsanleitung

HIK VISION

HIK VISION AX DS-PW32-H Series Bedienungsanleitung

HIK VISION

HIK VISION DS-K3B802BX Series Bedienungsanleitung

HIK VISION

HIK VISION DS-TCG405-E Bedienungsanleitung

HIK VISION

HIK VISION Pyronix EURO 46 V10 Betriebsanleitung

HIK VISION

HIK VISION DS-PS1-I-WB Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung