HIK VISION DS-3E0105P-E Bedienungsanleitung
DS-3E0105P-E/M Switch
User Manual
UD.6L0103D0392A01
User Manual
COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties
of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to
be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be
reproduced, changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any
warranties, guarantees or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to DS-3E0105P-E/M.
The Manual includes instructions for using and managing the product. Pictures, charts, images
and all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website
(http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in
various jurisdictions. Other trademarks and logos mentioned below are the properties of their
respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BYAPPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS
IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILLHIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FORANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,
AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH
THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNETACCESS, THE USE OF PRODUCT
SHALL BE WHOLLYAT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELYTECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO
ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL
NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE
PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUALAND THE
APPLICABLE LAW, THE LATER PREVAILS.
Safety Instruction
These instructions are intended to ensure that user can user the product correctly to avoid danger
or property loss.
The precaution measure is divided into “Warning” and “Caution”.
Warning: Serious injury or death may occur if any of the warning is neglected.
Caution: Injury or equipment damage may occur if any of the caution is neglected.
Warning Follow these safeguards
to prevent serious injury or death.
Caution Follow these precautions
to prevent potential injury or
material damage.
Warning
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
In the use of the product, you must be in strict compliance with the electrical safety
regulations of the nation and region. Refer to technical specifications for detailed
information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited
Power Source with 100-240 VAC or 12 V DC according to the IEC60950-1 standard. Refer
to technical specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
Make sure that the plug is firmly connected to the power socket.
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
cable, and then contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
Ensure unit is installed in a well-ventilated, dust-free environment.
Unit is designed for indoor use only.
Keep all liquids away from the device.
Ensure environmental conditions meet factory specifications.
Ensure unit is properly secured to a subrack or shelf.
Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive
electronics within the unit.
Use the device in conjunction with an UPS if possible.
Power down the unit before connecting and disconnecting accessories and peripherals.
Afactory recommended HDD should be used for this device.
Improper use or replacement of the battery may result in hazard of explosion. Replace with
the same or equivalent type only. Dispose of used batteries according to the instructions
provided by the battery manufacturer.
Thank you for purchasing our product. If there is any question or request, please do not hesitate
to contact dealer.
The figures in the manual are for reference only.
This manual is applicable to DS-3E0105P-E/M.
Contents
Chapter 1 Product Overview..................................................................................................1
1.1 Overview ....................................................................................................................1
1.2 Packing List................................................................................................................1
1.3 Appearance .................................................................................................................1
Chapter 2 Device Installation.................................................................................................5
2.1 Installation Notes ........................................................................................................5
2.2 Installation..................................................................................................................6
2.3 Grounding...................................................................................................................6
Chapter 3 Physical Connection..............................................................................................9
RJ45 Port Connection .......................................................................................................9
Checking ........................................................................................................................10
Power Supply..................................................................................................................10
Appendix Technical Specifications.......................................................................................11
Unmanaged PoE Switch/User Manual
1
Chapter 1 Product Overview
1.1 Overview
Hikvision DS-3E0105P-E/M is an unmanaged PoE switch providing 5 * 10/100 Mbps RJ45
ports. Ports 1-4 can power up devices compliant with IEEE 802.3af PoE (a maximum of 15.4 W
of each port) standard. The power output totals 35 W. In EXTEND ON mode, ports 1-4 support
up to 250 meters of data transmission and power supply.
1.2 Packing List
PoE switch * 1
Power adapter * 1
User Manual * 1
If any item is missing, or damaged, please keep the original package and contact the local
reseller or distributor immediately.
1.3 Appearance
Front Panel
See the following figure.
Unmanaged PoE Switch/User Manual
2
LED Indicators
Specific description of the LED indicators is shown as follows:
LED
State
Description
Power
Solid on
The switch is connected to a power supply
properly.
Off
The switch is connected to a power supply
improperly or not connected to a power
supply.
PoE
(on the upper right
corner of ports 1-4)
Solid on
The port is supplying power to the device
connected to it properly.
Off
The port is not supplying power or not
connected to a powered device.
Link/Act
(on the upper left corner
of ports 1-5)
Solid on
The port is connected properly.
Blinking
Data is being transmitted over the port.
Off
The port is connected improperly or not
connected to a device.
Link/Act LED
Power LED
PoE port
Uplink port
PoE LED
Link/Act LED
Unmanaged PoE Switch/User Manual
3
RJ45 Port
DS-3E0105P-E/M provides 5 * 10/100 Mbps auto-negotiation RJ45 ports. Ports 1-4 are
downlink ports compliant with IEEE 802.3af, and port 5 is the uplink port.
Note
Ports 1-2 have high priorities. Devices used for transmission of important data or playbacks of
videos are recommended to connect to these ports.
Power supply priority function of PoE ports safeguards your PoE switch in overload situation.
When the total power output of all powered devices exceeds 35 W, ports with lower priority
(port1 > port2 > port3 > port4) will have power of devices connected cut off to ensure no more
than 35 W power output.
For example, ports 1, 2 and 4 are supplying power properly with a total power output 26.2 W. If
port 3 is connected to a 9 W device, port 4 stops supplying power to the device connected to it.
Rear Panel
EXTEND mode switch
Grounding terminal
Power jack
Unmanaged PoE Switch/User Manual
4
EXTEND Mode Switch
State
Description
EXTEND OFF
The switch works in this mode by default. Port 1 to 4 offer a data
rate of as high as 100 Mbps.
EXTEND ON
Ports 1 to 4 offer a data rate of 10 Mbps with a transmission distance
up to 250 meters.
Note
For better performance of EXTEND ON mode, you are recommended to use Cat 5e Ethernet
cable or better and set WAN speed of the peer device to auto negotiation.
Power Jack
The power jack is used to connect the switch to a power supply using the included power
adapter.
Grounding Terminal
It is used to connect to a grounding cable for lightning protection. For details, see section 2.3
Grounding.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere HIK VISION Schalten Handbücher
HIK VISION
HIK VISION DS-3E05 Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3E03 P Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3E2510P Bedienungsanleitung
HIK VISION
HIK VISION DS-3E1526P-EI Bedienungsanleitung
HIK VISION
HIK VISION DS-3T3512P Bedienungsanleitung
HIK VISION
HIK VISION DS-3E0109P-E Bedienungsanleitung
HIK VISION
HIK VISION DS-3E15 Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3E0516 Series Bedienungsanleitung
HIK VISION
HIK VISION DS-KAD606-P Bedienungsanleitung
HIK VISION
HIK VISION 0500P Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3E15 P Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3WF01C-2N Bedienungsanleitung
HIK VISION
HIK VISION DS-3E1326P-EI Bedienungsanleitung
HIK VISION
HIK VISION DS-3E0318P-E/M Bedienungsanleitung
HIK VISION
HIK VISION DS-3E0106P-E/M Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3D2228P Montageanleitung
HIK VISION
HIK VISION DS-3E0524-E Bedienungsanleitung
HIK VISION
HIK VISION DS-3E13XXP-SI Series Bedienungsanleitung
HIK VISION
HIK VISION NS-0318P Series Bedienungsanleitung
HIK VISION
HIK VISION 0300P Series Bedienungsanleitung
