HIK VISION DS-3E1526P-EI Bedienungsanleitung
Smart Managed Switch Web
User Manual
UD33916B
Legal Informaon
About this Document
●This Document includes instrucons for using and managing
the Product. Pictures, charts, images and all other informaon
hereinaer are for descripon and explanaon only.
●The informaon contained in the Document is subject to
change, without noce, due to rmware updates or other
reasons. Please nd the latest version of the Document at the
Hikvision website ( hps://www.hikvision.com ). Unless
otherwise agreed, Hangzhou Hikvision Digital Technology Co.,
Ltd. or its aliates (hereinaer referred to as "Hikvision")
makes no warranes, express or implied.
●Please use the Document with the guidance and assistance of
professionals trained in supporng the Product.
About this Product
This product can only enjoy the aer-sales service support in the
country or region where the purchase is made.
Acknowledgment of Intellectual Property Rights
●Hikvision owns the copyrights and/or patents related to the
technology embodied in the Products described in this
Document, which may include licenses obtained from third
pares.
●Any part of the Document, including text, pictures, graphics,
etc., belongs to Hikvision. No part of this Document may be
excerpted, copied, translated, or modied in whole or in part
by any means without wrien permission.
● and other Hikvision's trademarks and logos are
the properes of Hikvision in various jurisdicons.
●Other trademarks and logos menoned are the properes of
their respecve owners.
LEGAL DISCLAIMER
●TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
THIS DOCUMENT AND THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS
IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR
FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE
PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL
HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF
i
THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES OR LOSS.
●YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET
PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION
SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES
RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.
●YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE
LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS
PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE
RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION,
RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR
DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL
NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES,
INCLUDING THE DEVELOPMENT OR PRODUCTION OF
WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR
EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT
OF HUMAN RIGHTS ABUSES.
●IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT
AND THE APPLICABLE LAW, THE LATTER PREVAILS.
© Hangzhou Hikvision Digital Technology Co., Ltd.
All rights reserved.
ii
Preface
Applicable Models
This manual is applicable to smart managed switches.
About Defaults
●Default administrator account: admin
●Super IP address: 10.180.190.200
Note
●The default user name admin needs to be acvated for rst-
me login.
●The default IP address of the switch is dynamically assigned.
●The super IP address cannot be modied. If the switch is
directly connected to a PC, the super IP address can be used to
access the switch for device management.
iii
Symbol Convenons
The symbols that may be found in this document are dened as
follows.
Symbol Descripon
Danger Indicates a hazardous situaon which, if not avoided,
will or could result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if
not avoided, could result in equipment damage, data
loss, performance degradaon, or unexpected
results.
Note Provides addional informaon to emphasize or
supplement important points of the main text.
iv
Contents
1 Introducon ............................................................. 1
2 Acvaon and Login ................................................. 1
3 Device Informaon ................................................... 3
3.1 Device Overview ................................................... 3
3.2 Port Status ............................................................ 4
3.3 Network Status ..................................................... 5
4 Network Conguraon ............................................. 7
5 Device Conguraon ................................................ 8
5.1 Port Conguraon ................................................ 8
5.1.1 Congure Port Aributes ............................. 8
5.1.2 Congure Link Aggregaon .......................... 9
5.1.3 Congure Long-Range Mode ..................... 10
5.1.4 Congure Port Isolaon ............................. 10
5.1.5 Congure Port Mirroring ........................... 11
5.1.6 Congure High-Priority Port ...................... 12
5.2 STP Conguraon ............................................... 12
5.3 LLDP Conguraon ............................................. 14
5.4 VLAN Conguraon ............................................ 14
5.4.1 Add VLAN ................................................... 14
5.4.2 Congure Port VLAN .................................. 15
5.5 PoE Management ................................................ 16
6 System Management .............................................. 16
6.1 Time Synchronizaon .......................................... 16
6.2 System Maintenance .......................................... 17
v
1 Introducon
Smart managed switches support management via web,
supporng funcons such as acvaon and login, device
overview, network conguraon, device conguraon, and
system maintenance.
Note
The funcons supported vary with device models. If there are
dierences between the gures shown in this manual and the
actual interfaces of your device, the laer prevails.
2 Acvaon and Login
If you use the switch for the rst me, you need to acvate it and
congure the password.
Before You Start
Ensure that your computer and switch are on the same network
segment.
Steps
Note
All gures in this manual are for illustraon purpose only.
1. Enter the default IP address of the switch in the address bar of
a web browser, and press Enter.
Figure 2-1 Acvaon
Note
●You can obtain the default IP address of the switch using the
SADP tool.
●You are recommended to use the following web browsers:
Microso Edge 89 or later, Google Chrome 89 or later, and
Firefox 78 or later.
1
2. Set a password and conrm the password.
Note
The password should contain 8 to 16 characters, including at
least two types of the following categories: uppercase leers,
lowercase leers, digits, and special characters.
3. Oponal: Check Cloud Management.
The Hik-Connect service is enabled.
4. Click OK.
The network conguraon page is displayed.
5. Oponal: Modify the network conguraons.
1) Go to System → Network Conguraon → Network
Conguraon .
Figure 2-2 Network Conguraon
2) Modify the IPv4 address, IPv4 subnet mask, default IPv4
gateway, preferred DNS address, and alternate DNS address
as required, or enable DHCP for automac IP address
assignment.
Note
You are recommended to modify the network conguraons
to beer manage your switch.
3) Log in to the switch web again with the new IP address aer
modicaon.
Figure 2-3 Login
2
3 Device Informaon
Aer logging in to the switch web, you can obtain detailed
informaon about the switch, including the device overview
informaon, port status informaon, and network status
informaon.
3.1 Device Overview
You can view or edit the device overview informaon on the
Overview page.
Basic Device Informaon
You can view the device model, soware version, serial No., IP
address, and MAC address of the switch in the lower right corner
of the Overview page.
Figure 3-1 Basic Device Informaon
Device Name
You can view the current device name or click next to it to
customize the device name on the Overview page.
Figure 3-2 Device Name
Device Running Time
You can also view the running me of the current device in the
upper right corner of the Overview page.
Figure 3-3 Device Running Time
VLANs Added
You can quickly view the number of VLANs that have been added,
or click to go to the VLAN Management page for VLAN
conguraon.
3
Figure 3-4 Number of VLANs Added
Cloud Plaorm Connecon Status
Figure 3-5 Cloud Plaorm Connecon Status
The Cloud Plaorm module shows whether the device is
connected to Hik-Connect.
●If the cloud plaorm is connected, scan the QR code to add the
device to Hik-Partner Pro app for remote management.
●If the cloud plaorm is disconnected, click Refresh to
reconnect, or click Diagnose to nd out the cause of the
connecon failure and go to the cloud plaorm conguraon
page as prompted for cloud plaorm conguraon.
3.2 Port Status
The Overview page provides a visual representaon of the
physical ports and shows the connecon or power supply status
of each port, making it easier for users to manage switch ports.
Port Panel
The Port Panel module displays the connecon and power supply
status of each port. When you hover the mouse over a port, the
port name, connecon status, rate/duplex, ow control status,
and packet receiving/sending rate are displayed. If the port is a
PoE port, you can view the PoE power of the port.
Figure 3-6 Port Panel
Port Details
The Port Details module lists the status parameters of each port.
You can also congure the port status, rate/duplex, and ow
control of each port, and view the port name, connecon status,
and actual rate/duplex of each port.
4
Dieses Handbuch passt für folgende Modelle
9
Inhaltsverzeichnis
Andere HIK VISION Schalten Handbücher
HIK VISION
HIK VISION DS-3E0318P-E/M Bedienungsanleitung
HIK VISION
HIK VISION 0300P Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3E1 P Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3E15 P Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3TXX06HP-E Series Bedienungsanleitung
HIK VISION
HIK VISION 24 series Bedienungsanleitung
HIK VISION
HIK VISION 0500P Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3E1510P Bedienungsanleitung
HIK VISION
HIK VISION DS-3E2300P-H Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3E2510P Bedienungsanleitung
HIK VISION
HIK VISION DS-3E2528B Bedienungsanleitung
HIK VISION
HIK VISION DS-3E15 Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3E1 P Series Bedienungsanleitung
HIK VISION
HIK VISION NS-0318P Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3E0105P-E Bedienungsanleitung
HIK VISION
HIK VISION DS-3D2216P Montageanleitung
HIK VISION
HIK VISION DS-KAD606-P Bedienungsanleitung
HIK VISION
HIK VISION DS-3D2208P Handbuch
HIK VISION
HIK VISION DS-3E1X05P Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3E0526P Series Bedienungsanleitung
