Hioki 3196 Gebrauchsanweisung

POWER QUALITY

QUICK START MANUAL

3196

ANALYZER

Contents i

APPX

IDX

Contents

Introduction .................................................................. 1

Standard Accessories and Options ..............................1

Safety Notes ................................................................ 4

Usage Notes ................................................................ 7

Reading the Operation Procedures ...........................12

1 Overview 13

1.1 Product Overview .............................................13

1.2 Features ...........................................................14

2 Parts Names 19

2.1 Instrument Labels and Functions .....................20

2.2 Screen Names and Display Elements ..............24

2.2.1 Common Display Elements ...............................25

3 Measurement Preparations 29

3.1 Connection Procedure ......................................29

3.2 Attaching the Strap ...........................................30

3.3 Installing the Battery Pack ................................31

3.4 Connecting the AC Adapter .............................. 32

3.5 Connecting the Voltage Cords ......................... 33

3.6 Wiring Adapter Connection (Option) ................ 35

3.7 Using a Clamp-On Sensor (Option) ................. 37

3.7.1 Clamp-On Sensor Specifications .......................38

3.7.2 Connecting a Clamp-on Sensor ........................41

3.8 Turning the Power On/Off ................................42

Contents

Quick Start Manual

4 Connecting to Lines to be Measured 45

4.1 Connection Procedure ......................................45

4.2 Connection Methods ........................................46

4.2.1 Single-Phase System Connections ...................47

4.2.2 Connecting to Multiple Systems ........................49

5 Quick Reference 51

5.1 Connection and System Settings .....................51

5.2 Data Display .....................................................52

5.3 Data Recording, Saving, Loading and Deleting 53

5.4 Event Analysis ..................................................54

5.5 Using Peripheral Devices .................................55

6 Measurement Method 57

6.1 Checking Three-phase Systems ......................57

6.2 Change in Power .............................................. 64

6.3 Harmonic Fluctuation ....................................... 70

6.4 Monitoring Interruptions ....................................78

6.5 Detecting Transients and Waveform Distortion 88

6.6 ∆V10 Flicker ..................................................... 96

6.7 IEC Flicker ...................................................... 102

7 Peripheral Devices 109

7.1 Using a PC Card ............................................ 109

7.2 Using a Printer (Option) ..................................116

7.3 Using the Instrument with a Computer ........... 121

7.3.1 RS-232C Connection .......................................122

7.3.2 LAN Connection ..............................................123

7.4 Using the External Control Terminals ............. 124

Contents iii

APPX

IDX

8 Specifications 125

9 Maintenance and Service 137

9.1 Cleaning and Storage ..................................... 137

9.2 Repair and Servicing ...................................... 138

9.3 Battery Pack Charging ................................... 139

9.4 Battery Pack Replacement and Disposal ....... 140

9.5 Instrument Disposal ........................................ 141

Appendix 143

Troubleshooting ....................................................... 143

FAQ .......................................................................... 145

Reference ................................................................ 146

Contents

Quick Start Manual

Introduction

Thank you for purchasing the HIOKI “3196 POWER QUALITY

ANALYZER”. To obtain maximum performance from the product,

please read this manual first, and keep it handy for future refer-

ence.

• Refer to the Instruction Manual (CD-R version) provided with this

device.

• For current input with this device, a clamp-on sensor (optional) is

required. For details, refer to the instruction manual for the

clamp-on sensor you are using.

• For detailed information on the EN50160, see the Instruction

Manual for EN50160.

Standard Accessories and Options

Checking the contents of the package

When you receive the product, inspect it carefully to ensure that no

damage occurred during shipping. In particular, check the accesso-

ries, panel switches, and connectors. If damage is evident, or if it

fails to operate according to the specifications, contact your dealer

or Hioki representative.

458 AC ADAPTER

(

power cord included)

Input Cord Label

(For distinguishing the voltage cord

and clamp-on sensor channels.)

9438-02 VOLTAGE CORD

1 set (8 cords)

(One each red, yellow, blue, and

gray cord, and four black cords.)

Strap

196POWERQUALITY

NALYZER

• Quick Start Manual

• Instruction Manual

for EN50160

Software (CD-R)

• Instruction Manual

• Instruction Manual for EN5016

• "Down96" Data Download

Application Software

LAN Connector

Cover

9459 BATTERY PACK

(7.2 V, 2700 mAh)

Standard Accessories and Options

2Quick Start Manual

Before using the 3196

• Before using the product the first time, verify that it operates nor-

mally to ensure that the no damage occurred during storage or

shipping. If you find any damage, contact your dealer or Hioki

representative.

• Before using the product, make sure that the insulation on the

9438-02 VOLTAGE CORD is undamaged and that no bare con-

ductors are improperly exposed. Using the product in such con-

ditions could cause an electric shock, so contact your dealer or

Hioki representative for repair.

Shipping precautions

Use the original packing materials when reshipping the product, if

possible.

Options

Clamps • 9660 CLAMP ON SENSOR (100 A rms rating)

• 9661 CLAMP ON SENSOR (500 A rms rating)

•

9667 FLEXIBLE CLAMP ON SENSOR

(500 A rms, 5000A rms rating)

• 9669 CLAMP ON SENSOR (1000 A rms rating)

• 9694 CLAMP ON SENSOR (5 A rms rating)

• 9695-02 CLAMP ON SENSOR (50 A rms rating)

• 9695-03 CLAMP ON SENSOR(100 A rms rating)

• 9657-10 CLAMP ON LEAK SENSOR

• 9675 CLAMP ON LEAK SENSOR

• 9290 CLAMP ON ADAPTER

(continuous 1000 A, up to 1500 A, CT ratio 10:1)

• 9219 CONNECTION CABLE (for Model 9695-02 and Model

9695-03)

Power supply • 9459 BATTERY PACK (7.2 V, 2700 mAh)

• 9458 AC ADAPTERx 1 (power cord included)

Printers • 9670 PRINTER

(with 1 roll of thermally sensitized paper supplied)

• 9671 AC ADAPTER (For the 9670 PRINTER)

• 9237 RECORDING PAPER (for printers, thermally sensitized

paper 80 mm x 25 m, 4 rolls)

• 9638 RS-232C CABLE

(for printers, cross cable, 9-pin to 25-pin/1.5 m)

Transport

case • 9339 CARRYING CASE (soft type)

• 9340 CARRYING CASE (hard type)

Adapters • 9264-01 WIRING ADAPTER

(For three-phase 3-wire (3P3W3M) systems)

• 9264-02 WIRING ADAPTER

(For three-phase 4-wire systems)

Standard Accessories and Options

Other

peripherals • 9726 PC CARD 128M (128MB compact flash card + adapter)

• 9727 PC CARD 256M (256MB compact flash card + adapter)

• 9728 PC CARD 512M (512MB compact flash card + adapter)

• 9642 LAN CABLE (5 m, straight-through cable, crossover

adapter included)

• 9444 CONNECTION CABLE (for RS-232C, Straight-through

cable)

• XD112 GPS BOX

Software • 9624 PQA-HiVIEW (PC application software)

• 9624-10 PQA-HiVIEW PRO (PC application software)

Safety Notes

4Quick Start Manual

Safety Notes

Safety Symbols

This manual contains information and warnings essential for safe

operation of the product and for maintaining it in safe operating

condition. Before using the product, be sure to carefully read the

following safety notes.

This product is designed to conform to IEC 61010 Safety

Standards, and has been thoroughly tested for safety prior to

shipment. However, mishandling during use could result in

injury or death, as well as damage to the product. Be certain

that you understand the instructions and precautions in the

manual before use. We disclaim any responsibility for acci-

dents or injuries not resulting directly from product defects.

In the manual, the symbol indicates particularly

important information that the user should read before

using the product.

The symbol printed on the product indicates that the

user should refer to a corresponding topic in the manual

(marked with the symbol) before using the relevant

function.

Indicates a double-insulated device.

Indicates AC (Alternating Current).

Indicates DC (Direct Current).

Indicates both DC (Direct Current) and AC (Alternating

Current).

Indicates a grounding terminal.

Indicates the ON side of the power switch.

Indicates the OFF side of the power switch.

Andere Handbücher für 3196

Inhaltsverzeichnis

Andere Hioki Messgerät Handbücher

Hioki

Hioki LCR HiTESTER 3535 Gebrauchsanweisung

Hioki

Hioki SM-8213 Bedienungsanleitung

Hioki

Hioki PW3365-20 Bedienungsanleitung

Hioki

Hioki 3441 Bedienungsanleitung

Hioki

Hioki CM4371-50 Bedienungsanleitung

Hioki

Hioki PW3365 Bedienungsanleitung

Hioki

Hioki PQ3100 Bedienungsanleitung

Hioki

Hioki PW6001 Bedienungsanleitung

Hioki

Hioki FT3432 Bedienungsanleitung

Hioki

Hioki 9327 Bedienungsanleitung

Hioki

Hioki 3273 Bedienungsanleitung

Hioki

Hioki 9272-05 Bedienungsanleitung

Hioki

Hioki 3284 HiTester Bedienungsanleitung

Hioki

Hioki 3287 Bedienungsanleitung

Hioki

Hioki 3390-10 Gebrauchs- und Pflegehandbuch

Hioki

Hioki 8715-01 Bedienungsanleitung

Hioki

Hioki 9274 Bedienungsanleitung

Hioki

Hioki CM4002 Bedienungsanleitung

Hioki

Hioki MR8880-20 Bedienungsanleitung

Hioki

Hioki TM6102 Bedienungsanleitung

Hioki

Hioki 3332 Bedienungsanleitung

Hioki

Hioki 3551 Bedienungsanleitung

Hioki

Hioki CM4001 Bedienungsanleitung

Hioki

Hioki BT3562-01 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung