Hioki 3196 Bedienungsanleitung

EN50160 MODE

INSTRUCTION MANUAL

3196

POWER QUALITY ANALYZER

Contents i

Contents

Introduction .................................................................. 1

Symbols ....................................................................... 1

Safety ........................................................................... 1

Outlook of Operating Procedures ................................2

1Overview 3

1.1 Product Overview ............................................... 3

2 Preparation for Measurement 5

2.1 EN50160 Mode and Normal Mode ..................... 5

2.2 EN50160 Screen ................................................ 6

2.3 PC Card .............................................................. 7

2.4 Limitations in EN50160 mode ............................ 8

2.5 Default Values .................................................... 9

3 Measurement 11

3.1 Setting Default Values ......................................11

3.2 Starting Measurement ......................................12

3.3 The EN50160 Screen during Measurement ..... 12

3.3.1 Common Display Areas .....................................13

3.3.2 Overview Screen ...............................................16

3.3.3 Harmonic Screen ...............................................19

3.3.4 Signaling Screen ...............................................22

3.3.5 Events Screen ...................................................24

Contents

4 Detailed Settings 27

4.1 Selecting EN50160 mode .................................27

4.2 Settings for the Measurement System ............. 29

4.3 Threshold Setting .............................................35

4.4 Settings in 3196 Mode Screen .........................41

4.5 PC Card ............................................................42

5 Specifications 43

5.1 Basic Specifications .........................................43

5.2 In EN50160 mode, items that differ from normal

3196 specifications ...........................................44

5.3 EN50160 Measurement Parameters ................ 46

5.4 EN50160 Display Specifications ......................47

5.5 EN50160 Setting Specifications .......................50

5.6 Data Storage ....................................................52

5.7 EN50160 Measurement Specifications ............53

5.8 Calculation Formulas ........................................58

Introduction

3196 EN50160 mode is available on Ver1.30 or later. Note that

EN50160 mode is not available in versions prior to Ver1.30.

Symbols

The following symbols in this manual indicate the relative impor-

tance of cautions and warnings.

Safety

Read the Instruction Manual supplied with the 3196 unit very care-

fully, and follow the indications given under "DANGER," "WARN-

ING," "CAUTION," and "NOTE."

For operating environment, maintenance, and disposal at end of

life, the same conditions apply as to the main 3196.

Refer to the 3196 Instruction Manual for details regarding basic

operation procedures.

Indicatesthat incorrect operation presents a possibility of

injury to the user or damage to the product.

Advisory items related to performance or correct opera-

tion of the product.

❖Indicates the reference.

Outlook of Operating Procedures

Indicates operation keys.

Indicates the screen name

selected with the DF key.

Indicatesthenameofanitem

displayed on the screen.

Displays the item selected in the drop-down

list box accompanied by an explanation.

Indicatesthepurpose

of the settings.

The EN50160 version of the 3196 can measure and analyze the power

supply voltage characteristics in accordance with the definitions stated in

the European standard EN50160:1999 “Voltage characteristics of elec-

tricity supplied by public distribution systems”.

Overview 1

1.1 Product Overview

EN50160 Overview Screen

Model 3196 (Ver1.30 or later) can be used to measure in EN50160

mode in addition to the normal measurement of Model 3196 (nor-

mal mode).

When EN50160 mode is selected, the measurement function for

EN50160 is added to the normal mode, and some functions in nor-

mal mode will be limited.

Refer to Section 2.4, "Limitations in EN50160 mode" (page 8) for

details of the limitations.

Be sure to check that you are in the correct measurement mode

before using the 3196.

Preparation for Measurement 2

2.1 EN50160 Mode and Normal Mode

Changing the mode

MEASURE

EN50160

OFF Normal mode

ON EN50160 mode

Confirm Cancel

Select from pull-

down menu

In EN50160 mode, the screen for EN50160 is accessible from the

"EVENT" screen.

In general, there are 3 screen types, and measurement in

EN50160 mode is possible only in these screens.

In addition, screens for normal mode (e.g., Timeplot and DMM) can

be displayed during EN50160 measurement.

2.2 EN50160 Screen

Andere Handbücher für 3196

Inhaltsverzeichnis

Andere Hioki Messgerät Handbücher

Hioki

Hioki CT9691 Bedienungsanleitung

Hioki

Hioki SP7001 Bedienungsanleitung

Hioki

Hioki CT6845A Bedienungsanleitung

Hioki

Hioki 8835-01 Bedienungsanleitung

Hioki

Hioki 9605 Bedienungsanleitung

Hioki

Hioki PW3360-21 Bedienungsanleitung

Hioki

Hioki IM3523 Gebrauchs- und Pflegehandbuch

Hioki

Hioki PW3390 Bedienungsanleitung

Hioki

Hioki CT7631 Bedienungsanleitung

Hioki

Hioki 8847 Bedienungsanleitung

Hioki

Hioki PW3365 Bedienungsanleitung

Hioki

Hioki BT4560 Bedienungsanleitung

Hioki

Hioki PQ3100 Bedienungsanleitung

Hioki

Hioki PW9100-03 Bedienungsanleitung

Hioki

Hioki RM3545 Bedienungsanleitung

Hioki

Hioki PW3390 Bedienungsanleitung

Hioki

Hioki FT3424 Bedienungsanleitung

Hioki

Hioki PW3365-20 Bedienungsanleitung

Hioki

Hioki CM4001 Bedienungsanleitung

Hioki

Hioki Super megohm SM7110 Bedienungsanleitung

Hioki

Hioki 3283-20 Bedienungsanleitung

Hioki

Hioki Memory HiCorder MR6000 Bedienungsanleitung

Hioki

Hioki P9000-01 Bedienungsanleitung

Hioki

Hioki CM4141 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung