Hioki 3159 Bedienungsanleitung

INSTRUCTION MANUAL

3159

INSULATION/

WITHSTANDING

HiTESTER

Contents

Introduction i

Inspection i

Safety Notes ii

Notes on Use v

Chapter Summary vi

Chapter 1 Overview 1

1.1 Product Introduction 2

1.2 Names and Functions of Parts 3

1.2.1 Front panel 3

1.2.2 Rubber keys 4

1.2.3 Rear panel 5

1.2.4 9615 H.V. TEST LEAD 6

1.2.5 REMOTE CONTROL BOX 7

1.3 External Dimensions 8

Chapter 2 Testing Arrangements 9

2.1 Connecting the Protective Ground Terminal 10

2.2 Connecting the External I/O Connector 11

2.3 Power Cord Connection 12

2.4 Powering On and Off the Unit 13

2.5 Connecting the 9615 H.V. TEST LEAD 14

2.6 Connecting the REMOTE CONTROL BOX 15

2.7 Installation of the Unit 16

2.8 Connection to the Measured Equipment 17

2.9 Startup Inspection 18

Chapter 3 Withstand Voltage ModeTesting Method 19

3.1 Withstand Voltage Mode Display 20

3.2 Displaying the READY State 22

3.2.1 Key-lock Function 23

3.3 "SETTING" State 24

3.3.1 Setting the Comparative Voltage Value 25

3.3.2 Setting the Upper (Lower) Limit Value 26

3.3.3 Setting the Test Time 27

3.3.4 Setting the Output Voltage range 28

3.3.5 Examples of Settings 29

3.4 Starting a Test 32

3.4.1 Setting the Output Voltage 33

3.4.2 Executing a Test 34

3.4.3 Screening in "TEST" State 36

3.5 PASS or FAIL Determination 37

3.5.1 "PASS" State 37

3.5.2 Screening in "PASS" State 39

3.5.3 "FAIL" State 40

3.5.4 Screening in "FAIL" State 44

Chapter 4 Insulation Resistance Mode Testing

Method 45

4.1 Insulation Resistance Mode Display 46

4.2 Displaying the READY State 48

4.2.1 Key-lock Function 49

4.3 "SETTING" State 50

4.3.1 Setting the Test Voltage Value 51

4.3.2 Setting the Lower (Upper) Limit Value 52

4.3.3 Setting the Test Time 54

4.3.4 Examples of Settings 55

4.4 Starting a Test 58

4.4.1 Executing a Test 58

4.4.2 Screening in "TEST" State 59

4.5 PASS or FAIL Determination 60

4.5.1 "PASS" State 60

4.5.2 Screening in "PASS" State 62

4.5.3 "FAIL" State 63

4.5.4 Screening in "FAIL" State 65

4.6 About the Auto Discharge Function 66

Chapter 5 Auto Test Mode Testing Method 67

5.1 Withstand Voltage Mode Display 68

5.2 Displaying the READY State 70

5.2.1 Key-lock Function 71

5.3 "SETTING" State 72

5.4 Starting a Test 73

5.4.1 Executing a Test 74

5.4.2 Screening in "TEST State" 75

5.5 PASS or FAIL Determination 76

5.5.1 "PASS" State 76

5.5.2 Screening in "PASS" State 78

5.5.3 "FAIL" State 79

5.5.4 Screening in "FAIL" State 81

5.6 Auto Discharge Function for insulation resistance

Tests 82

Chapter 6 Optional Functions 83

6.1 PASS Hold Function 85

6.2 FAIL Hold Function 86

6.3 Hold Function 87

6.4 Momentary Out 89

6.5 Double Action 90

6.6 FAIL Mode 91

6.7 RS Command [START] 92

6.8 Inter-lock Function 93

6.9 Voltage Comparator Position 94

6.10 Insulation Resistance Test Measurement Range 95

6.11 Insulation Resistance Test Termination Mode

Settings 96

6.12 Example of Optional Functions Use 98

Chapter 7 Saving/loading Preset Values 99

7.1 Saving Preset Values 99

7.1.1 Procedure for Saving Data 99

7.1.2 Example of Saving 102

7.2 Loading Preset Values 104

7.2.1 Procedure for Loading Data 104

7.2.2 Example of Loading 106

Chapter 8 External Interface 109

8.1 External I/O Terminal 109

8.1.1 Signal Line 110

8.1.2 Example of Input Signal Connection 112

8.1.3 Example of Output Signal Connection 113

8.1.4 Inter-lock Function 115

8.1.5 Timing Chart of External I/O Terminal 117

8.2 Status Out 122

8.3 Buzzer 124

Chapter 9 RS-232C Interface 125

9.1 Specifications 125

9.2 Connection Method 126

9.3 Command Transfer Methods 127

9.4 Command 129

9.4.1 Common Command Messages 130

9.4.2 Specific Command Messages 131

9.5 Response Formats 152

Chapter 10 Specifications 155

10.1 Basic Specifications 155

10.1.1 Withstand Voltage test portion 155

10.1.2 Insulation resistance test portion 157

10.1.3 Timer Section 157

10.1.4 Interface 158

10.2 General Specifications 160

Chapter 11 Maintenance and Inspection 161

11.1 Maintenance and Service 162

11.2 Fuse Replacement 163

11.3 Troubleshooting 164

11.4 Displaying Errors 165

11.5 Resetting the System 166

Appendix APPENDIX 1

Appendix 1 9613 REMOTE CONTROL BOX (SINGLE)

APPENDIX 1

Appendix 2 9614 REMOTE CONTROL BOX (DUAL)

APPENDIX 2

Appendix 3 9615 H.V. TEST LEAD (Standard Accessory)

APPENDIX 3

_____________________________________________________________________________________________

______________________________________________________________________________________________

NOTE Before using the product, make sure that the insulation on the leads is undamaged

and that no bare conductors are improperly exposed. Using the product in such

conditions could cause an electric shock, so contact your dealer or Hioki

resentative for re

air.

Introduction

Inspection

Thank you for purchasing the HIOKI 3159 INSULATION/WITHSTANDING

HiTESTER. To obtain maximum performance from the product, please read

this manual first, and keep it handy for future reference.

When you receive the product, inspect it carefully to ensure that no damage

occurred during shipping. In particular, check the connectors. If damage is

evident, or if it fails to operate according to the specifications, contact your

dealer or Hioki representative.

Accessories

Verify that the following standard accessories are complete.

Instruction Manual 1

Spare fuse (built into the power inlet) 1

Grounded three-core power cord 1

9615 H.V. TEST LEAD (High voltage and return side ) 2

Shipment of the unit

Use the original packing materials when reshipping the product, if possible.

Warranty

HIOKI cannot be responsible for losses caused either directly or indirectly by

the use of the 3159 with other equipment, or if ownership is transferred to a

third party.

_____________________________________________________________________________________________

______________________________________________________________________________________________

DANGER

This product is designed to conform to IEC 61010 Safety Standards, and

has been thoroughly tested for safety prior to shipment. However,

mishandling during use could result in injury or death, as well as

damage to the product. Be certain that you understand the instructions

and precautions in the manual before use. We disclaim any

responsibility for accidents or injuries not resulting directly from

product defects.

Safety Symbols

The symbol printed on the product indicates that the user should

refer to a corresponding topic in the manual (marked with the

symbol) before using the relevant function.

In the manual, the symbol indicates particularly important

information that the user should read before using the product.

Indicates that dangerous voltage may be present at this terminal.

Indicates a fuse.

Indicates AC (Alternating Current).

Indicates DC (Direct Current).

Indicates a protective conductor terminal.

Indicates the ON side of the power switch.

Indicates the OFF side of the power switch.

DANGER

Indicates that incorrect operation presents an extreme hazard that

could result in serious injury or death to the user.

WARNING

Indicates that incorrect operation presents a significant hazard that

could result in serious injury or death to the user.

CAUTION Indicates that incorrect operation presents a possibility of injury to

the user or damage to the product.

NOTE Advisory items related to performance or correct operation of the

product.

Safety Notes

This manual contains information and warnings essential for safe operation

of the product and for maintaining it in safe operating condition. Before

using the product, be sure to carefully read the following safety notes.

The following symbols in this manual indicate the relative importance of

cautions and warnings.

iii

_____________________________________________________________________________________________

______________________________________________________________________________________________

CAT I Secondary electrical circuits connected to an

AC electrical outlet through a transformer or

similar device.

CAT II Primary electrical circuits in equipment connected to

an AC electrical outlet by a power cord (portable

tools, household appliances, etc.)

CAT III Primary electrical circuits of heavy equipment (fixed

installations) connected directly to the distribution

panel, and feeders from the distribution panel to

outlets.

CAT IV The circuit from the service drop to the service

entrance, and to the power meter and primary

overcurrent protection device (distribution panel).

Overvoltage Categories

This product conforms to the safety requirements for CAT II measurement

products.

To ensure safe operation of measurement products, IEC 60664 establishes

safety standards for various electrical environments, categorized as CAT I to

CAT IV, and called overvoltage categories. These are defined as follows.

Higher-numbered categories correspond to electrical environments with

greater momentary energy, so a measurement product designed for CAT III

environments can endure greater momentary energy than one designed for

CAT II. Using a measurement product in an environment designated with a

higher-numbered category than that for which the product is rated could

result in a severe accident, and must be carefully avoided.

_____________________________________________________________________________________________

______________________________________________________________________________________________

f.s. (maximum display or scale value, or length of scale)

Signifies the maximum display (scale) value or the length of the scale

(in cases where the scale consists of unequal increments or where the

maximum value cannot be defined).

In general, this is the range value (the value written on the range

selector or equivalent) currently in use.

rdg. (displayed or indicated value)

This signifies the value actually being measured, i.e., the value that is

currently indicated or displayed by the measuring instrument.

dgt. (resolution)

Signifies the smallest display unit on a digital measuring instrument,

i.e., the value displayed when the last digit on the digital display is

"1".

Accuracy The specifications in this manual include figures for "measurement accuracy"

when referring to digital measuring instruments, and for "measurement

tolerance" when referring to analog instruments.

Andere Handbücher für 3159

Inhaltsverzeichnis

Andere Hioki Prüfgeräte Handbücher

Hioki

Hioki 3286 Bedienungsanleitung

Hioki

Hioki Power HiTester 3193 Bedienungsanleitung

Hioki

Hioki 3237 Bedienungsanleitung

Hioki

Hioki 8860-50 Bedienungsanleitung

Hioki

Hioki 3285 Bedienungsanleitung

Hioki

Hioki IR4053 Bedienungsanleitung

Hioki

Hioki IR4055 Bedienungsanleitung

Hioki

Hioki 3803 Bedienungsanleitung

Hioki

Hioki 3522-50 Bedienungsanleitung

Hioki

Hioki 3504 Bedienungsanleitung

Hioki

Hioki 7011 Bedienungsanleitung

Hioki

Hioki 3157 Bedienungsanleitung

Hioki

Hioki 3288 Bedienungsanleitung

Hioki

Hioki 3285-20 Bedienungsanleitung

Hioki

Hioki 3415-01 Bedienungsanleitung

Hioki

Hioki FT6380 Bedienungsanleitung

Hioki

Hioki CLAMP ON LEAK HiTESTER 3283 Bedienungsanleitung

Hioki

Hioki 9263 Bedienungsanleitung

Hioki

Hioki ST5680 Bedienungsanleitung

Hioki

Hioki 3455 Bedienungsanleitung

Hioki

Hioki ST4030A Bedienungsanleitung

Hioki

Hioki MEMORY HiCORDER 8855 Bedienungsanleitung

Hioki

Hioki IM9202 Bedienungsanleitung

Hioki

Hioki IR3455-01 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung