Hioki FT6380-90 Bedienungsanleitung

FT6380-50

CLAMP ON EARTH TESTER

Instruction Manual

Feb. 2021 Revised edition 1

FT6380B981-01 21-02H

FT6380-50

CLAMP ON EARTH TESTER

Instruction Manual

Feb. 2021 Revised edition 1

FT6380B981-01 21-02H

HIOKI FT6380B981-01

www.calcert.com sales@calcert.com1.800.544.2843 0

Contents

Introduction .......................................................................... 1

Verifying Package Contents ................................................ 2

Option (sold separately) ....................................................... 3

Safety Information ................................................................ 4

Operating Precautions ......................................................... 8

Chapter 1 Overview 13

1.1 Product Overview .............................................. 13

1.2 Features ............................................................ 14

1.3 Names and Functions of Parts .......................... 16



Operation key ............................................................ 18



Display Indicators ...................................................... 19

Chapter 2 Measurement 21

2.1 Measurement process ....................................... 21

2.2 Preparing for Measurement .............................. 22



Attaching the Strap .................................................... 22



Installing (or Replacing) the Battery and

Wireless Adapter ....................................................... 23

2.3 Pre-Operation Inspection .................................. 26



Using the included resistance check loop to

inspect the instrument................................................ 27

2.4 Measurement Procedure ................................... 28



Resistance Measurement.......................................... 29



Current Measurement ................................................ 33

2.5 Convenient function .......................................... 37



Data hold function (Holding the measured value) ..... 37



Backlight function

(Making measurements in a dark location) ................ 37



Filter function (Rejecting noise) ................................. 38



Alarm function

(Judging measured values and sounding an alarm) .. 39

FT6380B981-01

HIOKI FT6380B981-01

www.calcert.com sales@calcert.com1.800.544.2843 0



Memory function (Saving measurement data) ........... 42



Wireless Communication Function

(GENNECT Cross)..................................................... 46



Useful functionality of the Z3210 ................................49



Function mode ...........................................................50

2.6 Advanced Settings and Functions .....................51



Enabling/disabling the measurement range

display function .......................................................... 52



Enabling/disabling the auto-power-saving (APS)

function....................................................................... 53



Reverting the instrument to factory settings

(system reset) ............................................................ 54

Chapter 3 Specifications 55

3.1 General Specifications .......................................55

3.2 Input, Output, and Measurement Specifications 56

3.3 Function specifications ......................................62

Chapter 4 Maintenance and Service 63

4.1 Cleaning ............................................................63

4.2 Troubleshooting .................................................64



Inspection and Repair ................................................ 64



Before returning for repair .......................................... 64

4.3 Errors and Operating Status ..............................65

HIOKI FT6380B981-01

www.calcert.com sales@calcert.com1.800.544.2843 0

Introduction

Thank you for purchasing the Hioki FT6380-50 Clamp on Earth

Tester. To obtain maximum performance from the instrument,

please read this manual first, and keep it handy for future refer-

ence.

Introduction

HIOKI FT6380B981-01

www.calcert.com sales@calcert.com1.800.544.2843 0

Verifying Package Contents

Confirm that these contents are provided.

Use the original packing materials when transporting the instrument, if

possible.

For other transportation notes, refer to the “Transporting” (p.64).

Verifying Package Contents

When you receive the instrument, inspect it carefully to ensure

that no damage occurred during shipping. In particular, check

the accessories, panel switches, and connectors. If damage is

evident, or if it fails to operate according to the specifications,

contact your authorized Hioki distributor or reseller.

□

FT6380-50 Clamp on Earth Tester

□

Instruction Manual (this manual)

□

Carrying case

□

Resistance check loop

(1 Ω ±2%, 25 Ω ±1%)

□

LR6 Alkaline battery

×2

□

Strap

□

Operating Precautions

(0990A907)

Accessories

HIOKI FT6380B981-01

www.calcert.com sales@calcert.com1.800.544.2843 0

Option (sold separately)

The option listed below is available for the instrument. To order

an option, please contact your authorized Hioki distributor or

reseller. Options are subject to change. Check Hioki’s website

for the latest information.

Option (sold separately)

□

Z3210 Wireless Adapter

HIOKI FT6380B981-01

www.calcert.com sales@calcert.com1.800.544.2843 0

Safety Information

This instrument is designed to conform to IEC 61010 Safety

Standards and has been thoroughly tested for safety prior to

shipment. However, using the instrument in a way not described

in this manual may negate the provided safety features. Care-

fully read the following safety notes before using the instrument.

Safety Information

Mishandling instrument could result in bodily injury or

even death, as well as damage to the instrument.

Familiarize yourself with the instructions and precautions

in this manual before use.

Symbols on equipment

Indicates the need for caution or the presence of a

hazard. For more information about locations

where this symbol appears on instrument compo-

nents, see “Operating Precautions” (p.8), warning

messages listed at the beginning of operating

instructions, and the document entitled “Operating

Precautions” that comes with the instrument.

Indicates a double-insulated device.

Indicates AC (Alternating Current).

Indicates that using the instrument in an external

magnetic field of exceeding 30 A/m is prohibited.

Indicates that the instrument may be connected to

or disconnected from a live circuit.

Indicates whether the power is on or off.

HIOKI FT6380B981-01

www.calcert.com sales@calcert.com1.800.544.2843 0

Safety Information

The following symbols in this manual indicate the relative impor-

tance of cautions and warnings.

Indicates an imminently hazardous situation

that, if not avoided, will result in death of or

serious injury to the operator.

Indicates a potentially hazardous situation that,

if not avoided, could result in death of or seri-

ous injury to the operator.

Indicates a potentially hazardous situation that,

if not avoided, could result in minor or moder-

ate injury to the operator.

Indicates the possibility of equipment damage.

Symbols for Various Standards

Indicates the Waste Electrical and Electronic

Equipment Directive (WEEE Directive) in EU

member states.

Indicates that the instrument complies with stan-

dards imposed by EU directives.

Other Symbols

Indicates a prohibited action.

(p. #)

Indicates the location of reference information.

[ ] Information displayed on the screen is enclosed

in brackets.

(bold

characters)

Bold text indicates alphanumeric characters

shown on operation keys.

HIOKI FT6380B981-01

www.calcert.com sales@calcert.com1.800.544.2843 0

Safety Information

Screen displays that differ from the above notation:

Hioki expresses accuracy as error limit values specified in terms

of percentages of reading.

The screen of this instrument displays characters in the fol-

lowing manner.

Symbols for Various Standards

Over-range display

Open display

Resistance measurement: When the read-

ing exceeds 1,600 Ω

Current measurement: When the reading

exceeds 60.0 A.

This screen is displayed when the clamp

sensor is not completely closed during use

of the resistance measurement function.

Reading

(displayed

value)

Refers to the displayed value of the measur-

ing instrument. The limit values of reading

errors are expressed in percent of reading

(% of reading, % rdg).

HIOKI FT6380B981-01

www.calcert.com sales@calcert.com1.800.544.2843 0

Safety Information

This instrument complies with CAT IV safety requirements.

To ensure safe operation of measurement instruments IEC

61010 establishes safety standards for various electrical envi-

ronments, categorized as CAT II to CAT IV, and called measure-

ment categories.

Using a measurement instrument in an environment designated

with a higher-numbered category than that for which the instru-

ment is rated could result in a severe accident, and must be

carefully avoided.

Use of a measurement instrument that is not CAT-rated in CAT II

to CAT IV measurement applications could result in a severe

accident, and must be carefully avoided.

Measurement categories

CAT II

Primary electrical circuits in equipment connected

to an AC electrical outlet by a power cord (portable

tools, household appliances, etc.)

CAT II covers directly measuring electrical outlet

receptacles.

CAT III

Primary electrical circuits of heavy equipment

(fixed installations) connected directly to the distri-

bution panel, and feeders from the distribution

panel to outlets.

CAT IV

The circuit from the service drop to the service

entrance, and to the power meter and primary

overcurrent protection device (distribution panel).

HIOKI FT6380B981-01

www.calcert.com sales@calcert.com1.800.544.2843 0

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hioki Prüfgeräte Handbücher

Hioki

Hioki 9261 Bedienungsanleitung

Hioki

Hioki MO HiTESTER 3452 Bedienungsanleitung

Hioki

Hioki 3403 Bedienungsanleitung

Hioki

Hioki BT3563A Bedienungsanleitung

Hioki

Hioki IR4053 Bedienungsanleitung

Hioki

Hioki IM9201 Bedienungsanleitung

Hioki

Hioki 3665-20 Bedienungsanleitung

Hioki

Hioki FT6031-03 Bedienungsanleitung

Hioki

Hioki Analog MO HiTESTER Series Bedienungsanleitung

Hioki

Hioki 3454-11 Bedienungsanleitung

Hioki

Hioki 3154 Bedienungsanleitung

Hioki

Hioki 3801 Bedienungsanleitung

Hioki

Hioki FT6031 Bedienungsanleitung

Hioki

Hioki IR3455 Bedienungsanleitung

Hioki

Hioki DT4261 Bedienungsanleitung

Hioki

Hioki 3169-21 Gebrauchsanweisung

Hioki

Hioki ST5680 Bedienungsanleitung

Hioki

Hioki 3561 Bedienungsanleitung

Hioki

Hioki 3550 Bedienungsanleitung

Hioki

Hioki 3153 Bedienungsanleitung

Hioki

Hioki 8807-01 Bedienungsanleitung

Hioki

Hioki FT3405 Bedienungsanleitung

Hioki

Hioki 9699 Bedienungsanleitung

Hioki

Hioki ST5520-01 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung