Hioki 3560 Bedienungsanleitung

Instruction Manu

For...は専用機種。複数の場合は「/」で区切る。不要の場合はとる

。

形名を入力。複数の場合は「/」で区切る

。

356

品名を入力

。

AC mΩHiTESTE

June 2011 Revised edition 12 3560A981-12 11-06H

Contents

Introduction i

Inspection i

Safety Notes ii

Notes on Use iv

Chapter Summary v

Chapter 1 Overview 1

1.1 Product Overview 1

1.2 Features 2

1.3 Identification of Controls and Indicators 3

1.3.1 Fluorescent Character Display Tube 3

1.3.2 Front Panel 4

1.3.3 Rear Panel / Side Panel 6

Chapter 2 Specifications 7

2.1 General Specifications 7

2.2 Measurement Range 9

2.3 External Dimensions 10

Chapter 3 Preparing for Measurement 11

3.1 Mounting the Interface 11

3.2 Connecting the Power Cord 12

3.3 Connecting the Measurement Leads 13

3.4 Powering On/Off 14

3.5 Setting the Power Supply Frequency 15

3.6 Instrument Handle 16

Chapter 4 Measurement Procedure 17

4.1 Selecting the Measurement Mode 18

4.2 Setting the Measurement Range 19

4.3 Advanced Setting 20

4.3.1 Sampling Rate 20

4.3.2 Buzzer 20

4.3.3 Hold 21

4.3.4 Lead Line Break Check (Imperfect Contact Check)23

4.3.5 Voltage Limiter 24

4.3.6 Zero Clear 24

4.3.7 Key Lock 25

4.3.8 Local 25

4.4 Zero Adjust 26

4.5 Starting Measurement 28

Chapter 5 Comparator Function 31

5.1 Resistance Measurement Mode 32

5.2 Resistance and Voltage Measurement Mode 34

5.3 Selecting the AUTO/MANU Comparator Mode 36

5.4 Changing the Comparator Number 37

5.5 Switching On/Off the Comparator 38

5.6 Checking the Comparator Conditions (View) 39

5.6.1 View in Comparator of Resistance

Measurement Mode Setting 39

5.6.2 View in Comparator of Resistance and

Voltage Measurement Mode Setting 40

Chapter 6 External Control Terminal and External

Output Terminal 41

6.1 Terminals and Signals 42

6.2 Connection Method 44

6.3 Measurement by External Control Terminal and

External Output Terminal 45

6.3.1 External Control Terminal (Input Signal) 45

6.3.2 External Output Terminal (Output Signal) 46

6.3.3 Timing Chart 47

6.3.4 Internal Circuit Configuration (Input/Output) 51

Chapter 7 RS-232C Interface 53

7.1 Connection to Computer (RS-232C) 54

7.2 Operating Procedure (RS-232C) 55

7.2.1 Setting the RS-232C 55

7.2.2 Communication Methods by the RS-232C 55

7.2.3 Program Messages 56

7.2.4 Message Format 56

7.2.5 Headers 57

7.2.6 Data Formats 58

7.2.7 Delimiters 58

7.2.8 Separators 59

7.2.9 Abbreviation of Compound Commands 59

7.2.10 Output Buffer 60

7.2.11 Input Buffer 60

7.2.12 Status Byte Registers 60

7.2.13 Event Registers 61

7.3 Message Code Table 63

7.3.1 Common Command 63

7.3.2 Messages 64

7.4 Message Reference 66

7.4.1 Common Command Messages 67

7.4.2 Specific Command Messages 72

7.5 Initialize Item List 92

7.6 Notes on RS-232C Interface 93

7.7 Sample Program 94

7.7.1 To be prepared in Visual Basic 5.0/6.0 94

7.7.2 To be prepared in Visual Basic 2005 96

7.7.3 Creation Procedure(Visual Basic 2005) 96

7.7.4 Sample Programs (Visual Basic 2005) 98

Chapter 8 GP-IB Interface (Option) 101

8.1 Connection to Computer (GP-IB) 102

8.2 Operating Procedure (GP-IB) 103

8.2.1 Communication Methods by the GP-IB 103

8.2.2 Program Messages 103

8.2.3 Message Format 104

8.2.4 Headers 105

8.2.5 Data Formats 106

8.2.6 Delimiters 107

8.2.7 Separators 107

8.2.8 Abbreviation of Compound Commands 108

8.2.9 Output Queue 108

8.2.10 Input Buffer 108

8.2.11 Status Model 109

8.2.12 Status Byte Registers 110

8.2.13 Event Registers 111

8.2.14 GP-IB Command 113

8.3 Sample Program 114

8.4 Notes of the GP-IB 117

Chapter 9 Printer Interface (Option) 119

9.1 Outline 119

9.2 Connection with a General-purpose Centronics

Printer 119

9.3 Printing 121

Chapter 10Useful Information and Advanced

Measurement 123

10.1 AC Four-terminal Method 123

10.2 Synchronous Detection System 124

10.3 Configuration and Extension of the Measurement

Leads 125

10.4 Effect of Over-voltage 127

10.5 SOURCE/SENSE Line Break Check 128

10.6 IEC 512-2, JIS C 5402 and JIS C 5441 129

10.7 Example of Advanced Measurements 130

10.8 Calibration of the 3560 131

Chapter 11Maintenance and Service 133

11.1 Message Code Table 133

11.2 Cleaning 134

11.3 Troubleshooting 135

11.4 Options 136

11.4.1 9588 GP-IB INTERFACE 136

11.4.2 9589 PRINTER INTERFACE 136

11.4.3 9203 DIGITAL PRINTER 136

11.4.4 9287-10 CLIP TYPE LEAD (Option) 137

11.4.5 9452 CLIP TYPE LEAD 137

11.4.6 9453 FOUR TERMINAL LEAD 138

11.4.7 9455 PIN TYPE LEAD 138

11.4.8 9461 PIN TYPE LEAD 139

11.4.9 9467 LARGE CLIP TYPE LEAD 139

11.4.10 9454 ZERO ADJUSTMENT BOARD 139

11.4.11 9466 REMOTE CONTROL SWITCH 140

────────────────────────────────────────────────────

Introduction

────────────────────────────────────────────────────

ntroduction

nspection

Thank you for purchasing the HIOKI "3560 AC mΩHiTESTER" To

obtain maximum performance from the instrument, please read this

manual first, and keep it handy for future reference.

When you receive the instrument, inspect it carefully to ensure that no

damage occurred during shipping. In particular, check the accessories,

panel switches, and connectors. If damage is evident, or if it fails to

operate according to the specifications, contact your dealer or Hioki

representative.

Accessories

9287-10 CLIP TYPE LEAD 1

Three-core power cord (L type) 1

Instruction manual 1

Basic instructions 1

Options

9455 PIN TYPE LEAD

9461 PIN TYPE LEAD

9465 PIN TYPE LEAD

9467 LARGE CLIP TYPE LEAD

9452 CLIP TYPE LEAD

9453 FOUR TERMINAL LEAD

9466 REMOTE CONTROL SWITCH

9454 ZERO ADJUSTMENT BOARD

9588 GP-IB INTERFACE

9151-02GP-IB CONNECTOR CABLE (2 m)

9151-04GP-IB CONNECTOR CABLE (4 m)

9589 PRINTER INTERFACE

9203 DIGITAL PRINTER

9425 CONNECTION CABLE (2-meter long for connecting to the 9425)

9233 RECORDING PAPER (Ten 10-meter rolls for the 9233)

────────────────────────────────────────────────────

Safety Notes

────────────────────────────────────────────────────

WARNIN

This instrument is designed to comply with IEC 61010 Safety

Standards, and has been thoroughly tested for safety prior to

shipment. However, mishandling during use could result in injury or

death, as well as damage to the instrument. Be certain that you

understand the instructions and precautions in the manual before

use. We disclaim any responsibility for accidents or injuries not

resulting directly from instrument defects.

Safety symbols

･The symbol printed on the instrument indicates that the user

should refer to a corresponding topic in the manual (marked with

the symbol) before using the relevant function.

･In the manual, the symbol indicates particularly important

information that the user should read before using the instrument.

Indicates AC (Alternating Current).

Indicates DC (Direct Current).

Indicates the ON side of the power switch.

Indicates the OFF side of the power switch.

DANGE

Indicates that incorrect operation presents an extreme hazard that

could result in serious injury or death to the user.

WARNIN

Indicates that incorrect operation presents a significant hazard that

could result in serious injury or death to the user.

CAUTIO

Indicates that incorrect operation presents a possibility of injury to

the user or damage to the instrument.

NOTE Indicates advisory items related to performance or correct operation

of the instrument.

afety Notes

This manual contains information and warnings essential for safe

operation of the instrument and for maintaining it in safe operating

condition. Before using the instrument, be sure to carefully read the

following safety notes.

The following symbols in this manual indicate the relative importance of

cautions and warnings.

iii

────────────────────────────────────────────────────

Safety Notes

────────────────────────────────────────────────────

Measurement categories

To ensure safe operation of measurement instruments, IEC 61010

establishes safety standards for various electrical environments,

categorized as CAT II to CAT IV, and called measurement categories.

CAT II : Primary electrical circuits in equipment connected to an AC

electrical outlet by a power cord (portable tools, household

applianceas, etc.)

CAT II covers directly measuring electrical outlet receptacles.

CAT III: Primary electrical circuits of heavy equipment (fixed

installations) connected directly to the distribution panel, and

feeders from the distribution panel to outlets.

CAT IV: The circuit from the service drop to the service entrance, and to

the power meter and primary overcurrent protection device

(distribution panel).

Using a measurement instrument in an environment designated with a

higher-numbered category than that for which the instrument is rated

could result in a severe accident, and must be carefully avoided.

We define measurement tolerances in terms of f.s. (full scale), rdg.

(reading) and dgt. (digit) values, with the following meanings:

f.s. (maximum display value or scale length)

The maximum displayable value or the full length of the scale.

This is usually the maximum value of the currently selected range.

rdg. (reading or displayed value)

The value currently being measured and indicated on the measuring

instrument.

dgt. (resolution)

The smallest displayable unit on a digital measuring instrument, i.e., the

input value that causes the digital display to show a "1".

────────────────────────────────────────────────────

Notes on Use

────────────────────────────────────────────────────

DANGE

Be sure to ensure the floating state for a battery circuit (measured

object) with voltage exceeding 30 Vrms, 42.4 Vpeak, or 60 VDC.

Connecting the instrument to a circuit exceeding 30 Vrms, 42.4

Vpeak, or 60 VDC may lead to electric shock.

WARNIN

Connect SOURCE and SENSE (banana plug) in the proper manner.

For the correct procedure, refer to Section 3.3 "Connecting the

Measurement Leads ".

To avoid injury or damage to the instrument, do not attempt to

measure AC voltage, or DC voltage exceeding 60 V.

Do not allow the instrument to get wet, and do not take

measurements with wet hands. This may cause an electric shock.

Do not use the instrument where it may be exposed to corrosive or

combustible gases. The instrument may be damaged or cause an

explosion.

To avoid electric shock when measuring live lines, wear appropriate

protective gear, such as insulated rubber gloves, boots and a safety

helmet.

CAUTIO

･Do not store or use the instrument where it could be exposed to direct

sunlight, high temperature or humidity, or condensation. Under such

conditions, the instrument may be damaged and insulation may

deteriorate so that it no longer meets specifications.

･This instrument is designed for use indoors. It can be operated at

temperatures between 0 and 40℃without degrading safety.

･Do not input voltage and current between SOURCE-Hi and SENSE-Hi or

between SOURCE-Lo and SENSE-Lo.

･Various connectors are provided on the outer panel of the instrument.

Make sure the instrument is turned off before connecting cables to these

connectors. To prevent short-circuits, make sure connections are made

correctly.

･The GND terminals on the external control terminal, external output

terminal, RS-232C interface, GP-IB interface, and printer interface are

grounded. This means that the devices connected to the GND terminals

are grounded. Take care in handling them.

otes on Use

Follow these precautions to ensure safe operation and to obtain the full

benefits of the various functions.

Preliminary Checks

Before using the instrument the first time, verify that it operates

normally to ensure that the no damage occurred during storage or

shipping. If you find any damage, contact your dealer or Hioki

representative.

Before using the instrument, make sure that the insulation on the

measurement leads is undamaged and that no bare conductors are

improperly exposed. Using the instrument in such conditions could

cause an electric shock, so contact your dealer or Hioki representative

for replacements.

Inhaltsverzeichnis

Andere Hioki Prüfgeräte Handbücher

Hioki

Hioki 3803 Bedienungsanleitung

Hioki

Hioki BT3554 Bedienungsanleitung

Hioki

Hioki 3550 Bedienungsanleitung

Hioki

Hioki P2000 Bedienungsanleitung

Hioki

Hioki 3244-60 Bedienungsanleitung

Hioki

Hioki 3244-60 Bedienungsanleitung

Hioki

Hioki 3288-20 Bedienungsanleitung

Hioki

Hioki 3255 Bedienungsanleitung

Hioki

Hioki 3522-50 Bedienungsanleitung

Hioki

Hioki Power HiTester 3193 Bedienungsanleitung

Hioki

Hioki MEMORY HiCORDER 8855 Bedienungsanleitung

Hioki

Hioki FT6380-50 Bedienungsanleitung

Hioki

Hioki 3665-20 Bedienungsanleitung

Hioki

Hioki 3237 Bedienungsanleitung

Hioki

Hioki 3805 Bedienungsanleitung

Hioki

Hioki BT3564 Bedienungsanleitung

Hioki

Hioki 3804-50 Bedienungsanleitung

Hioki

Hioki 3550 Bedienungsanleitung

Hioki

Hioki ST5680 Benutzerhandbuch

Hioki

Hioki FT3470-51 Bedienungsanleitung

Hioki

Hioki ST5680 Bedienungsanleitung

Hioki

Hioki MO HiTESTER 3452 Bedienungsanleitung

Hioki

Hioki 9699 Bedienungsanleitung

Hioki

Hioki 3173 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung