Hirschmann PowerMICE Bedienungsanleitung

Redundancy L3P

Release

3.0

01/07

Technical Support

[email protected]

User Manual

Redundancy Configuration

Industrial ETHERNET Gigabit Switch

PowerMICE, MACH 4000

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use.

The performance features described here are binding only if they have been expressly

guaranteed in the contract. This publication has been created by Hirschmann Automation and

Control GmbH according to the best of our knowledge. Hirschmann reserves the right to change

the contents of this manual without prior notice. Hirschmann can give no guarantee in respect

of the correctness or accuracy of the details in this publication.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

Printed in Germany (27.2.07)

Hirschmann Automation and Control GmbH

Stuttgarter Straße 45-51

72654 Neckartenzlingen

Tel. +49 1805 141538 -01-0107

Contents

Redundancy L3P

Release

3.0

01/07 3

Contents

About this Manual 5

Key 7

Introduction 9

Comparison of the Redundancy Procedures 11

1 Rapid Spanning Tree 13

1.1 The Spanning Tree Protocol 14

1.1.1 The Tasks of the STP 14

1.1.2 The bridge parameters 15

1.1.3 Rules for creating the tree structure 17

1.1.4 Example: determination of root paths 20

1.1.5 Example: manipulation of root paths 22

1.1.6 Example: manipulation of a tree structure 24

1.2 The Rapid Spanning Tree Protocol 25

1.2.1 Port roles 25

1.2.2 Port states 28

1.2.3 Spanning Tree Priority Vector 29

1.2.4 Fast reconfiguration 29

1.3 Configuring the Rapid Spanning Tree 31

2 Redundant ring structure – MRP-Ring 39

2.1 The MRP-Ring 39

2.2 Configuring the MRP-Ring 41

3 Redundant ring structure – HIPER-Ring 45

3.1 The HIPER-Ring 45

3.2 Configuring the HIPER-Ring 47

Contents

4Redundancy L3P

Release

3.0

01/07

4 Redundant coupling 51

4.1 The Variants of Redundant Coupling 51

4.2 Configuring the Redundant Coupling 53

4.2.1 STAND-BY Switch 53

4.2.2 One-switch coupling 56

4.2.3 Two-switch coupling 63

4.2.4 Two-switch coupling with control line 70

5 Link Aggregation 77

5.1 Configuring the link aggregation 78

5.2 HIPER-Ring and Link Aggregation 82

6VRRP 83

6.1 Configuring the VRRP 84

6.1.1 General settings 84

6.1.2 Settings per port 84

6.1.3 Setting up the VRRP router interface 86

6.1.4 Configuring the VRRP router interface 86

6.1.5 Deleting the VRRP router interface 87

6.2 Statistics 88

A Appendix 89

Hirschmann Competence 90

FAQ 91

Reader's comments 93

Index 95

About this Manual

Redundancy L3P

Release

3.0

01/07 5

About this Manual

The “Redundancy Configuration” user manual contains all the information

you need to select a suitable redundancy procedure and configure it.

The “Installation” user manual contains a device description, safety instruc-

tions, a description of the display, and all the other information that you need

to install the device before you begin with the configuration of the device.

The “Basic Configuration” user manual contains all the information you need

to start operating the switch. It takes you step by step from the first startup

operation through to the basic settings for operation in your environment.

You will find detailed descriptions of how to operate the individual functions

in the “Web-based Interface” and “Command Line Interface” reference

manuals

About this Manual

6Redundancy L3P

Release

3.0

01/07

Key

Redundancy L3P

Release

3.0

01/07 7

Key

The designations used in this manual have the following meanings:

DList

VWork step

USubheading

Indicates a cross-reference with a stored link.

Note: A note emphasizes an important fact or draws your attention to

adependency.

Courier font ASCII representation in user interface

Symbols used:

Execution in the Web-based Interface user interface

Execution in the Command Line Interface user interface

Router

Switch

Bridge

Key

8Redundancy L3P

Release

3.0

01/07

Hub

A random computer

Configuration computer

Server

Introduction

Redundancy L3P

Release

3.0

01/07 9

Introduction

The Switch contains a wide variety of redundancy functions:

DRapid Spanning Tree Algorithm

DMRP-Ring

DHIPER-Ring

DRedundant coupling of HIPER-Rings and network segments

DLink Aggregation

There are three tools for operating these functions:

DWeb-based Management (supplied with the switch)

for easy configuration of the agent (see "Web-based Interface" reference

manual).

DCommand Line Interface (supplied with the Switch)

for setting basic functions (see "Command Line Interface" manual).

DHiVision Network Management

for easy configuration of all agents (see "HiVision Hirschmann Network

Management" manual).

Introduction

10 Redundancy L3P

Release

3.0

01/07

Andere Handbücher für PowerMICE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hirschmann Netzwerk-Router Handbücher

Hirschmann

Hirschmann SPIDER Premium Line Bedienungsanleitung

Hirschmann

Hirschmann RSR20-0900 Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann MM2-2FXM3/2TX1 Handbuch

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann HiSecOS EAGLE20 Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann OWL LTE M12 Bedienungsanleitung

Hirschmann

Hirschmann RS2-FX-LH/FX-LH Handbuch

Hirschmann

Hirschmann Power MICE Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann MACH 1020 Bedienungsanleitung

Hirschmann

Hirschmann RSB20-0800T1T1 Bedienungsanleitung

Hirschmann

Hirschmann OWL3G Bedienungsanleitung

Hirschmann

Hirschmann EAGLE30-0402 series Bedienungsanleitung

Hirschmann

Hirschmann RS40 series Bedienungsanleitung

Hirschmann

Hirschmann OWL 4G Europe Bedienungsanleitung

Hirschmann

Hirschmann OWL LTE M12 Bedienungsanleitung

Hirschmann

Hirschmann MICE MS20-1600 Series Bedienungsanleitung

Hirschmann

Hirschmann MACH104-20TX-F Series Bedienungsanleitung

Hirschmann

Hirschmann OWL-IPG-AMERICAS Bedienungsanleitung

Hirschmann

Hirschmann MICE MS20 Bedienungsanleitung

Hirschmann

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise