Hisense HB600 Bedienungsanleitung

Bluetooth Handsfree

Car Kit

MODEL:HB600

User Guide

Thank You 3

Safety Guidelines 3

Introducing the HB600 6

What Your Speaker Can Do 5

Speciﬁcations 7

Charging Your Speaker 7

GETTING STARTED 8

Pairing with Your Phone 9-10

How to

Answer a Call 10

End a Call 10

Make a Call 10

Reject a Call* 10

Activate Voice Dialing* 11

Redial Last Number* 11

Adjust Sound and Volume 11

Call Waiting and Placing a Call on Hold* 11

Reject Call Waiting 11

Mute Function 11

Call Transfer From The Speaker

To Mobile Phone 11-12

What the Lights Mean 13

Restore Factory Settings 14

Taking Care of Your Speaker 15

Glossary 15-16

Thank you

Thank you for purchasing the Hisense HB600 Bluetooth®

Speaker. We hope you enjoy it! This instruction manual will

get you started and ready to make the most of your speaker.

WARNING!

Speakers are capable of delivering sounds at loud volumes

and high pitched tones. Exposure to such sounds can

result in permanent hearing loss damage. The volume

level may vary based on conditions such as the phone

you are using, its reception and volume settings, and the

environment. Please read the safety guidelines below

prior to using this speaker.

Safety Guidelines

Prior to using this product follow these steps:

1. Before using the speakerphone, turn the volume

control to its lowest level, use the speakerphone

in conversation, and then slowly adjust the volume

control to a comfortable level.

2. During the use of this product:

Keep the volume at the lowest level possible and

avoid using the speakerphone in noisy environments

where you may be inclined to turn up the volume;

If increased volume is necessary, adjust the volume

control slowly; and if you experience any discomfort

Table of Contents

or ringing in your ears, immediately discontinue

using the speakerphone and consult a physician.

With continued use at high volume, your ears may

become accustomed to the sound level, which may

result in permanent damage to your hearing without

any noticeable discomfort.

3. Drive Safely

Several studies have shown that cell phone usage

while driving creates a distraction to the driver which

may increase the likelihood of an accident. This

distraction potential is not eliminated by the use

of a handsfree phone. Handsfree phones have not

been shown to be safer than hand-held phones with

respect to driver distraction. When using the phone

while driving, keep conversations short and resist any

temptation to make notes or read documents. Before

answering calls consider your circumstances. Pull off

the road and park before making or answering calls

when driving conditions require (e.g.bad weather,

high trafﬁc density, presence of children in the car,

difﬁcult junctions or maneuvers)

REMEMBER; DRIVING COMES FIRST, NOT THE CALL!

4. Abide by Local Laws.

Please check if the local laws where you live restrict

the use of mobile phones while driving. It is the

owner’s responsibility to use this product in

compliance with the laws of the place where you live.

WARNING!

Keep out of reach of children: The plastic bags the product

and its parts are wrapped in are not toys for children. The

bags themselves or the many small parts they contain may

cause choking if ingested.

WARNING!

Ignition of ﬂammable atmospheres: Do not use the

Speaker in environments where there is a danger of

ignition of ﬂammable gases.

Introducing the HB600

Speaker1.

Microphone2.

LED Light3.

Charging Socket4.

Mute Button5.

Multi-Function Button (MFB)6.

•Pairing Button – When speaker is turned off press

and hold for 6 sec to put Speaker into pairing mode

•Answer/End Button

•Press for 4 seconds to turn speaker on (blue lights

ﬂash 5 times)

•Press and hold for 5 seconds to turn speaker off

(red light ﬂash 5 times and then power off)

Volume (+)

Volume (-)8.

What your speaker can do

Your Hisense HB600 lets you do all this

Answer Calls

•

End• Calls

Reject

• Calls*

Voice

• Dialing*

Last

• Number Redialing*

Call

• Waiting*

Mute

• Conversation

Put

• Call on Hold*

* Phone Dependent

Speciﬁcations

Up to 14 hours talk time/standby time up to 850•

hours

Rechargeable battery, with charging option from AC

•

power supply and car power outlet.

Operating range up to 10 meters (approx. 33 feet)

•

Headset and hands-free Bluetooth proﬁles•

Bluetooth speciﬁcation (see glossary) version•

2.1+EDR

Charging Your Speaker

Make sure that your Hisense HB600 speaker is fully charged

before ﬁrst use (normal charging time is approximately 3

hours). Use the AC adaptor to charge from a power socket,

or charge directly from you’re your car power outlet using

the charging cable provided After connecting to the power

source, the red LED will ﬂash while charging.

After charging ends the red LED will turn off.

Auto power off

if the speaker is turned on but not connected to a

Bluetooth device for 15 minutes, the speaker will auto-

matically turn off.

GETTING STARTED

The Hisense HB600 is easy to operate.

Turning Your Speaker On and Off

To turn your speaker on, press and hold the MFB for 4

seconds. Release the button when you hear short beep, the

blue light will ﬂash 5 times and the speaker will turned on

To turn off your Speaker, press and hold the MFB for 4

seconds. Release the button when you hear short beep,

the blue light will ﬂash 5 times and the speaker will turned

off.

Pairing with Your Phone or Other Device

Before you use your Hisense HB600, you need to pair it

with your mobile phone.

1. Make sure that the HB600 is turned off

2. Press and hold the MFB for 6 sec. until led ﬂash red

and blue alternatively.

3. Activate Bluetooth function of the mobile phone to

search for Bluetooth devices (please refer to the

phone’s manual);

4. Set your Bluetooth phone to ‘discover’ the Hisense

HB600

Follow your phone’s instruction guide. This usually

involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’

menu on your phone and selecting the option to

‘discover’ or ‘add’ a Bluetooth device.

5. Your phone will ﬁnd the Hisense HB600

6. Your phone will then ask if you want to pair with it.

Accept by pressing ‘Yes’ or ‘OK’ on the phone and

conﬁrm with the passkey or PIN = 0000 (4 zeros).

Your phone will conﬁrm when pairing is complete.

In case of unsuccessful pairing, repeat steps 1 to 6.

Note: If the pairing cannot be completed within 2

minutes after the pairing mode is activated, the

speakerphone will power off automatically. Please

repeat steps above to pair the speakerphone and

mobile phone again.

How to…

Answer a Call

Press the MFB on your speaker to answer a call.

End a Call

Press the MFB to end an active call.

Make a Call

When you make a call from your mobile phone, the call will

(subject to phone settings) automatically transfer to your

speaker. If your phone does not allow this feature, press on

the Hisense HB600’s MFB to transfer the call to the speaker.

Reject a Call*

Press the MFB for approximately 2 seconds when the

phone rings to reject an incoming call. Depending on your

phone settings, the person who called you will either be

forwarded to your voice mail or hear a busy signal.

Activate Voice Dialing*

Press the MFB once. Wait for the beep and then an-

nounce the name you wish to call.

For best results, record the voice-dialing tag through your

speaker. Please consult your phone’s user manual for

more information about using this feature.

Redial Last Number*

Press the MFB twice when the speaker is turned on and

not use (StandBy mode).

Adjust Sound and Volume

During a call, repeatedly press the Volume (+) or Volume

(-) to change the volume.

Call Waiting and Placing a Call on Hold*

This lets you put a call on hold during a conversation and

answer a waiting call.

Press the MFB twice to put the active call on hold and

answer the waiting call.

Press the MFB twice to switch between the two calls.

Tap the MFB to end the active conversation.

Reject Call Waiting

During a conversation, Press the MFB for 2 seconds in

order to reject the call waiting.

Mute Function

During a conversation, press the mute button to mute the

microphone.

To reactivate the microphone, short press the mute button.

Call Transfer from Speaker to Mobile Phone

Press the volume (+) and volume (-) buttons together. The

conversation will be route to the mobile phone.

In order to route the conversation back to the speaker,

press again the volume (+) and volume (-) buttons together

Functions marked with * are dependent on your phone

supporting these features.

Check your phone’s user manual for further information.

What the light means

What you see What does this

mean about your

Speaker

When

connected

to charger

Solid red LED Charging

Red LED turn off Charging

completed

When NOT

connected

to charger

Red and blue LED

ﬂash alternatively.

Pairing

Blue LED ﬂash once

every 3 seconds

Stand by mode

Blue LED ﬂash twice

every 3 seconds

Stand by mode

(but no Bluetooth

device connected

to speaker)

Red LED ﬂash once

every 3 seconds

Low power alert

Blue LED ﬂash once

every 6 seconds

Call in progress

Red LED steady on Mute

Blue LED ﬂash 5

times rapidly

Power on or off

Troubleshooting

I hear crackling noises

For the best audio quality, make sure that the mobile

phone is placed within 10 meter from the speaker.

I cannot hear anything in my speaker

Increase the volume on the mobile phone.

Ensure that the Speaker is paired with the phone.

Make sure that the phone is connected to the speaker –

if it does not connect from the phone’s Bluetooth menu.

I have pairing problems even though my phone indicates

otherwise

You may have deleted your speaker pairing connection in

your mobile phone.

Follow the pairing instructions in page 9.

Restore Factory Settings

In order to restore factory settings and delete all paired

devices from the speaker, while in stand by mode, press

the volume (+) and volume (-) together for 10 seconds,

until the blue LED ﬂash 5 times. Continue pressing for

3 seconds, the speaker will turn off automatically, turn

on the speaker and the speaker will return to its original

settings.

Notice: If the speakerphone is connected with a mobile

phone before restore to default setting, it will

enter pairing mode automatically after restored

to default.

Taking Care of Your Speaker

Always store the Hisense HB600 with the power off•

and safely protected.

Avoid storage at extreme temperatures (above

•

45°C/113°F – including direct sunlight – or below

-10°C/14°F). This can shorten battery life and may

affect operation. High temperatures may also de-

grade performance.

Do not expose the Hisense HB600 to rain or other

•

liquids.

Glossary

Bluetooth

The Bluetooth® Trademark and logos are owned by the

Bluetooth SIG, Inc. and any use of such marks by Hisense

is under license. Other trademarks and trade names are

those of their respective owners.

1. Bluetooth is a radio technology that connects

devices, such as mobile phones and speakers,

without wires or cords over a short distance (approx.

30 feet). Get more information at www.bluetooth.com.

2. Bluetooth proﬁles are the different ways that

Bluetooth devices communicate with other devices.

Bluetooth phones support either headset proﬁle, the

handsfree proﬁle or both. In order to support a certain

proﬁle, a phone manufacturer must implement certain

mandatory features within the phone’s software.

3. Pairing creates a unique and encrypted link between

two Bluetooth devices and lets them communicate

with each other. Bluetooth devices will not work if

the devices have not been paired successfully.

4. Passkey or PIN is a code that you enter on your mobile

phone to pair it with your Hisense HB600. This

makes your phone and the Hisense HB600 recognize

each other and automatically work together.

Dispose of the product according to local standards and

regulations or local laws.

Inhaltsverzeichnis

Andere Hisense Autozubehör Handbücher

Hisense

Hisense HB650 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung