Hitachi OPTIGEN AP 720STM Bedienungsanleitung

AP 720STM

LCD Panel Guide

OPTIGEN®

Semi-Automated Instrument

Confidentiality Notice

The materials and information contained herein are being provided by Hitachi Chemical

Diagnostics to its customer solely for customer’s use for its internal business purposes.

Hitachi Chemical Diagnostics retains all rights, title, interest in and copyrights to the

materials and information herein. The materials and information contained herein

constitute confidential information of Hitachi Chemical Diagnostics and customer shall

not disclose or transfer any of these materials or information to any third party.

Hitachi Chemical Diagnostics, Inc.

630 Clyde Court

Mountain View, California 94043

_________________

U.S. and Foreign Patents Pending

permission from Hitachi Chemical Diagnostics, Inc.

Document Number: 0781 Revision: 01

Date: November 2007

― Table of Contents ―

Page

1 Operation Key…………………………………………………………... 3

2 Screen Display and Operation Method

2-1 Initialization……………………………………………………… 4

2-2 Main Menu………………………………………………………. 5

2-3 Panel Type Selection…………………………………………….. 6

2-4 Auto-Run (Process 1 to 7)………………………………………. 7

2-5 Auto-Run (Photoreagent Setup and Process 8)…………………. 9

2-6 Auto-Run (Process End)………………………………………… 10

2-7 Maintenance……………………………………………………... 11

2-8 Pause…………………………………………………………….. 13

2-9 Start/End Process and Position Setup……………………………. 16

2-10 Alarm…………………………………………………………….. 17

3 Flowchart………………………………………………………………... 21

1 Operation Key

Display:

Liquid Crystal Panel

Operation Key:

Only the touch panel key in the shaded field is executable. Press the Operation Key

to execute the function. See Figure 1.

Numerical Value Input Key:

Numerical value can be registered by ‘ENT’ key. If the value entered is out of the

defined range, beep sounds will be on for 3 times. ‘ESC’ key is used for returning

to the original value. See Figure 2.

(Figure 1)

(Figure 2)

2 Screen Display and Operation Method

2-1 Initialization

[Screen Display]

(Figure 3) (Figure 4)

[Summary]

Figure 3 will display approximately 5 seconds after the power is turned on. Then

the screen will change automatically to the initialization screen, Figure 4. After the

completion of initialization, there is a beep sound and Main Menu screen, Figure 5

will display.

[Operation Key]

(Figure 4)

Pause: To Figure 27 Pause screen

2 Screen Display and Operation Method

2-2 Main Menu

[Screen Display]

(Figure 5) (Figure 6)

[Summary]

Figure 5 is the Main Menu screen after completion of Figure 4. Panel 36 is the

default panel.

Figure 6 is the Main Menu screen after selecting Panel 20 in Figure 7.

[Operation Key]

Panel 36: To Figure 7 Panel Type Selection screen

Next: To Figure 8 Auto-Run screen

Maintenance: To Figure 19 Maintenance screen

2 Screen Display and Operation Method

2-3 Panel Type Selection

[Screen Display]

(Figure 7)

[Summary]

Select 36-allergen or 20-allergen panel in Figure 7.

[Operation Key]

36: To Figure 5 Main Menu screen

20: To Figure 6 Main Menu screen

2 Screen Display and Operation Method

2-4 Auto-Run (Process 1 to Process 7)

[Screen Display]

(Figure 8)

(Figure 9)

(Figure 10) (Figure 11)

(Figure 12)

(Figure 13) (Figure 14)

(Continued on next page)

(Auto-Run, cont.)

[Summary]

Figure 8 is a confirmation screen. The Operator needs to check that the Wash

Buffer Bottle and Antibody Reservoir are filled, and that the Waste Bottle is

emptied prior to the Auto-Run. Press “Start” key. The following screens will be

displayed in order and Auto-Run will be executed:

o Figure 9 displays the priming is in process.

o Figure 10 displays the Rack and Pette setup is being checked.

o Figure 11 displays the Rack and Pette setup is confirmed.

o Figure 12 displays the washing process (Process 1, 4 or 7) or aspiration

process (Process 2 or 5) is in operation. See Chapter 6, Operation, in the AP

720S Instruction Manual.

o Figure 13 shows incubation process (Process 3 or 6) is in operation.

o Figure 14 is a warning screen during incubation. It indicates the door is open

with a beep sound. After the door is closed, the screen will return to Figure 13.

In the case the door is open during the operation, i.e. initialization, priming,

rack & pettes check, washing, aspirating, rinsing and draining, the screen will

switch to Pause (see section 2-8 Pause)

[Operation Key]

(Figure 8)

Start: To Figure 9 Priming screen

Back: To Figure 5 Main Menu screen

(Figure 9)

Pause: To Figure 28 Pause screen

(Figure 10)

Pause: To: Figure 29 Pause screen

(Figure 11)

Pause: To: Figure 29 Pause screen

(Figure 12)

Pause: To: Figure 30 Pause screen

2 Screen Display and Operation Method

2-5 Auto-Run (Photoreagent Setup and Process 8)

[Screen Display]

(Figure 15)

(Figure 16) (Figure 17)

[Summary]

Figure 15 will alarm Operator that Photoreagent is needed. The display shows the

elapsed time from the start of auto-pause. “Alarm Off” key will stop the alarm.

“Continue” key will shift the screen to Figure 16.

Figure 16 requests confirmation of Photoreagent setup. “No” key will return to the

previous screen. “Yes” key will shift the screen to Figure 17 and continue

Auto-Run. Please note that before pressing “Yes” key, the Operator needs to fill the

Photoreagent Reservoir with Photoreagent mixture and load into Sample/Reagent

Rack. See instructions in AP 720S Instruction Manual.

[Operation Key]

(Figure 15)

Alarm Off: Stop beep sound

Continue: To Figure 16 screen

(Figure 16)

Yes: To Figure 17 screen

No: To Figure 15 screen

(Figure 17)

Pause: To Figure 30 Pause screen

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hitachi Medizinische Geräte Handbücher

Hitachi

Hitachi AP 720S Bedienungsanleitung

Hitachi

Hitachi S211 Bedienungsanleitung

Hitachi

Hitachi C42T Bedienungsanleitung

Hitachi

Hitachi UST-5710-7.5 Bedienungsanleitung

Hitachi

Hitachi S121 Bedienungsanleitung

Hitachi

Hitachi EUP-C524 Bedienungsanleitung

Hitachi

Hitachi EUP-C516 Bedienungsanleitung

Hitachi

Hitachi EUP-B712 Bedienungsanleitung

Hitachi

Hitachi SCENARIA Bedienungsanleitung

Hitachi

Hitachi S3ESEL Bedienungsanleitung

Hitachi

Hitachi EUP-LV74 Bedienungsanleitung

Hitachi

Hitachi UST-5417 Bedienungsanleitung

Hitachi

Hitachi L43K Bedienungsanleitung

Hitachi

Hitachi EUP-C715 Bedienungsanleitung

Hitachi

Hitachi EUP-V73W Bedienungsanleitung

Hitachi

Hitachi EUP-L74M Bedienungsanleitung

Hitachi

Hitachi CC41R1 Bedienungsanleitung

Hitachi

Hitachi VC35 Probe Bedienungsanleitung

Hitachi

Hitachi EUP B715 Bedienungsanleitung

Hitachi

Hitachi S31KP Bedienungsanleitung

Hitachi

Hitachi C252 Bedienungsanleitung

Hitachi

Hitachi UST-9135P Bedienungsanleitung

Hitachi

Hitachi EUP-L65 Bedienungsanleitung

Hitachi

Hitachi EUP-L73S Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung