Hitachi UX Twin Nozzle Bedienungsanleitung

Instruction Manual for LAN Communication Modbus

Ethernet Communication

HITACHI Printer

Model UX Twin-Nozzle

Thank you for purchasing the Hitachi IJ Printer Model UX Twin Nozzle.

This instruction manual describes the Ethernet communication (LAN Communication Modbus)

function. For other features of the printer, please refer to Instruction manual or Technical

manual.

If the printer is improperly handled or maintained, it may not operate smoothly and may become

defective or cause an accident. It is therefore essential that you read this manual to gain a

complete understanding of the printer and use it correctly.

After thoroughly reading the manual, properly store it for future reference.

First Edition

Table of Contents

1. Ethernet communication (LAN communication Modbus) function························· 1

2. Preparations ·································································································· 2

2.1 Network connection preparations ·································································· 2

2.2 IJ Printer preparations ·················································································· 2

2.3 LAN cable connection ·················································································· 3

2.4 Setting the communication environment ························································ 4

2.4 Usage precautions ······················································································· 4

3. Connection test ····························································································· 6

3.1 Procedure for connection test ······································································· 6

4. Modbus communication ················································································· 9

4.1 Overview ····································································································· 9

4.2 Transmission procedure ··············································································· 9

4.3 Message format ··························································································· 9

4.4 Data configuration ·······················································································15

4.5 Detail of Data configuration ··········································································37

4.6 Modbus communication rule for IJ Printer ·····················································39

4.7 Examples of Transmission procedure ···························································40

5. Troubleshooting guide ···················································································45

"Ethernet" is a registered trademark of Xerox Corporation, USA.

"Windows" is registered trademarks of Microsoft Corporation, USA, in the USAand other countries.

1. Ethernet communication (LAN communication Modbus) function

(1) Overview

●Function for Ethernet communication between the IJ Printer and external unit employing a

LAN environment.

●Type of Ethernet communication can be selected from Modbus communication.

●Modbus communication require development of a communication program on the external

unit side.

For the development purpose of communication program, IJP control library will be provided

as a development kit.

List of functions

No. Function name Description

1 Modbus

communication

Supports Modbus protocol. Because Modbus protocol is one type of

protocol commonly used by industrial equipment, if Modbus

communication is employed for other unit, you can create a

communications program for the external unit using this asset.

When the communication program is newly developed, its

development schedule will be shortened with use of IJP control

library.

(2) Configuration diagram

Standard specifications

Item Specifications

Ethernet standards IEEE802.3 compatible, 10BASE-T, 100BASE-T

Protocol TCP/IP

Connection cable Category 5 UTP or STP cable

(3) Notice

●The time from when the signal is transmitted from an external unit to when the IJ Printer

receives the signal cannot be strictly defined in the same way as with serial communications.

Ethernet

External unit

IJ Printer

2. Preparations

●If connecting the IJ Printer with external unit, use a LAN connection cable.

2.1 Network connection preparations

(1) Connect to Intranet LAN

No. Work Remarks

1 You should obtain the IP address from the Information

Systems Department of your company.

2 You should consult with the Information Systems Department

of your company concerning network settings such as

gateway.

(2) Connect from outside the company

No. Work Remarks

1 After concluding a contract with a provider, you should obtain

a fixed IP address from the provider.

2 If using a telephone line, a contract for service such as ADSL

is required. If not using a telephone line, a mobile

environment is required. You also need a router that supports

a mobile card.

3 Set the network settings as instructed by the provider's

manual.

2.2 IJ Printer preparations

No. Work Remarks

1 Connect the IJ Printer to the Ethernet (computer or

hub, etc.) with a LAN cable.

Refer to 2.3 LAN cable

connection.

2 Set the communication environment on the IJ

Printer's screen.

Refer to

2.4 Setting the communication

environment.

3 Conduct a connection test if necessary. Refer to

3.Connection test.

2.3 LAN cable connection

[I/O section (with cover removed)]

Connect the LAN cable.

2.4 Setting the communication environment

●Set the LAN function on communication environment setup screen to "Modbus

communication".

Setting item of communication environment setup screen

Setting item Description

LAN function

●No use: Modbus communication function cannot be used.

●Modbus Communication: Modbus communication function

canbeused.

IP address Sets IJ Printer’s IP address.

Subnet mask Sets IJ Printer’s Subnet mask.

Default gateway Sets IJ Printer’s Default gateway.

PORT No. Sets IJ Printer’s PORT No.

MAC address Displays IJ Printer’s MAC address.

Example communication environment setup screen

2.5 Usage precautions

(1) Functions listed below are not operational during the use of this function.

List of functions which are not operational during the use of this function

(2) Functions listed below are not supported by this function.

List of functions which are not supported by this function

No Screen Item Note

1 Comm. env. setup Buffer function [Disable] Fixed

2 Data exchange [Reflect at once] Fixed

No Function

1 More than one of Calendar/Count blocks can not be set in one item.

2 Barcode can not be set in Calendar/Count block.

3 “Overall setup” of “Format setup” can Not be used.

4 Kanji characters can not be used.

Glossary

Term Explanation

IP address

(Internet protocol address)

The IP address is a 32-bit ID number allotted to equipment

connected to the Internet. The 32-bit number of the IP address is

usually divided into four 8-bit segments for display. The IP

address consists of a "network address" that identifies the

network and a "host address" that identifies the individual pieces

of equipment connected in the network.

Subnet mask The subnet mask is a 32-bit number that defines what bits of the

IP address are used for the network address. The network

address segment of the IP address is determined by calculating

the logical AND of the IP address and subnet mask.

Default gateway The default gateway is equipment such as a router that functions

as the "gateway" to the network. When there is communication

between different networks and there is no unique path for the

equipment to be accessed, the default gateway is used to

connect them.

Port number The port No. is the sub-address that specifies one of several

programs running on equipment specified by the IP address.

Port numbers 502 or 1024-65535 are used as the sub-address.

MAC address

(Media Access Control

address)

MAC address is the one to identify the device on a network.

MAC address consists of 12 digits such as 01-23-45-67-89-AB.

3. Connection test

Directly connect the IJ Printer to a PC and check the connection.

3.1 Procedure for connection test

1 Directly connect the IJ Printer to the PC with a LAN cable.

2 Set the network settings of external unit by steps 2 to 5.

Click the Start menu, and double-click [Control Panel] > [View network status and tasks] > [Change

adapter settings] > [Local Area Connection].

The following window is then displayed.

3 Click [Properties].

(Example using Windows 7 OS)

4 Click [Internet Protocol Version 4 (TCP/IPv4)].

5 Select [Use the following IP address], and enter an IP address other than 192.168.0.1 and

192.168.0.255 (the example shown in the figure uses 192.168.0.15) and then enter 255.255.255.0

in the Subnet mask field. Click [OK].

6 Follow the steps below to confirm that the network connection is properly established. The following

steps describe procedures for Windows 7.

Select [Start Menu] > [All

Programs] > [Accessories] >

[Command prompt] to open the

Command Prompt window.

Type the following command:

Ping 192.168.0.1

Note:

This command is not case

sensitive.

Byte=32 time=24ms ..in four

consecutive lines*1 then external

unit settings are completed.

*1:

In default, the ping command

returns the response for four

times. For details of the ping

command, type the following

command: ping/help

If "Destination host unreachable."

response is returned for the ping

command, it means

communication has not been

established between the IJ Printer

and external unit. Re-check the

following:

[Check points]

* Have the communication

settings of the IJ Printer

been changed?

* Are the network settings of

the external unit correct?

Andere Handbücher für UX Twin Nozzle

Inhaltsverzeichnis

Andere Hitachi Drucker Handbücher

Hitachi

Hitachi IJ PH Bedienungsanleitung

Hitachi

Hitachi PH Bedienungsanleitung

Hitachi

Hitachi SL1 Bedienungsanleitung

Hitachi

Hitachi UX2 Series Montageanleitung

Hitachi

Hitachi UX2 Series Bedienungsanleitung

Hitachi

Hitachi UX2 Series Bedienungsanleitung

Hitachi

Hitachi IJ RX2 Bedienungsanleitung

Hitachi

Hitachi PB Series Bedienungsanleitung

Hitachi

Hitachi PXR-D Bedienungsanleitung

Hitachi

Hitachi IJ RX2 Bedienungsanleitung

Hitachi

Hitachi UX2 Series Bedienungsanleitung

Hitachi

Hitachi IJ UX Bedienungsanleitung

Hitachi

Hitachi DDS 40 Bedienungsanleitung

Hitachi

Hitachi UX Verdrahtungsschema

Hitachi

Hitachi RX Bedienungsanleitung

Hitachi

Hitachi UX2 Series Bedienungsanleitung

Hitachi

Hitachi IJ UX2 Bedienungsanleitung

Hitachi

Hitachi UX Montageanleitung

Hitachi

Hitachi PXR Series Bedienungsanleitung

Hitachi

Hitachi RX2 Bedienungsanleitung

Hitachi

Hitachi UX Twin-Nozzle Bedienungsanleitung

Hitachi

Hitachi UX2 Series Installations- und Betriebsanleitung

Hitachi

Hitachi IJ UX Bedienungsanleitung

Hitachi

Hitachi PXR Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung