HMS HGP 115 Installations- und Betriebsanleitung

HGP 115 Communication Gateway

SAFETY AND COMPLIANCE INFORMATION

SP2774 1.0 en-US ENGLISH

—3 (8)

Pin Decription for Power Connector

1 FE

2 GND

3 +24 VDC

Safety and Compliance Information

General Safety Instructions

Caution

This equipment emits RF energy in the ISM (Industrial, Scientific, Medical) band. Make sure that all

medical devices used in proximity to this equipment meet appropriate susceptibility specifications for

this type of RF energy.

Connecting power with reverse polarity or using the wrong type of power supply may damage the

equipment. Make sure that the power supply is connected correctly and of the recommended type.

This equipment contains parts that can be damaged by electrostatic discharge (ESD). Use ESD

prevention measures to avoid damage.

HGP 115 Communication Gateway Safety and Compliance Information SP2774 1.0 en-US

Safety and Compliance Information 4 (8)

Intended Use

The intended use of this device is as a communication interface and gateway. The device receives and

transmits data on various physical levels and connection types.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the

equipment may be impaired.

Installation

The numbering refers to the illustrations at the top of this document.

DIN Rail Mount (1)

1. Hang the unit on the rail and pull the bottom tab downwards, then press the unit towards the rail and

release the tab.

2. To remove, pull the bottom tab downwards to release the unit from the rail.

The equipment must be electrically grounded through the DIN rail for EMC compliance. Make sure that

the equipment is correctly mounted on the rail and that the rail is properly grounded.

Power Connector (2)

The power supply of the device must be a grounded circuit PELV (connection between functional earth and

ground). The power supply must be a limited power source according to the EN60950-1 or must be provided

with an anti-surge fuse of 2 A.

Connecting power with reverse polarity or using the wrong type of power supply may damage the

equipment. Make sure that the power supply is connected correctly and of the recommended type.

Technical Specifications

Operating temperature 0 to +55 °C

(IEC 60068-2-1 and IEC 60068-2-2)

Storage temperature -20 to +60 °C

(IEC 60068-2-1 and IEC 60068-2-2)

Humidity range 5–85 % RH, non-condensing

(IEC 60068-2-30)

Power supply 24 V ±15 % DC regulated power source

Current consumption Maximum: 50 mA @ 24 VDC

Mechanical rating IP20, NEMA rating 1

Mounting DIN rail (EN 50022)

Network shield conductance via DIN rail

CE Compliance

This product is in compliance with the RoHS Directive 2011/65/EU with amendment 2015/863 through conformance

with applicable standards. The full text of the Declaration of Conformity is available at www.hms-networks.com.

HGP 115 Communication Gateway Safety and Compliance Information SP2774 1.0 en-US

Safety and Compliance Information 5 (8)

Disposal and recycling

You must dispose of this equipment properly according to local laws and regulations. Because this equipment contains

electronic components, it must be disposed of separately from household waste. When this equipment reaches its end

of life, contact local authorities to learn about disposal and recycling options, or return the equipment to HMS.

For more information, see www.hms-networks.com.

HGP 115 Communication Gateway Safety and Compliance Information SP2774 1.0 en-US

Safety and Compliance Information 6 (8)

UL Ordinary Locations (OrdLoc)

This equipment is certified for use in ordinary locations in compliance with the following standards:

• UL 61010-1 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND

LABORATORY USE - PART 1: GENERAL REQUIREMENTS - Edition 3 - Revision Date 2016/04/29

• UL 61010-2-201 STANDARD FOR SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR

MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-201: PARTICULAR REQUIREMENTS FOR

CONTROL EQUIPMENT - Edition 2 - Issue Date 2018/05/14

• CSA C22.2 NO. 61010-1-12 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT,

CONTROL, AND LABORATORY USE. PT. 1, GENERAL REQUIREMENTS - Edition 3 - Revision Date 2016/04/29

• CSA C22.2 NO. 61010-2-201:14 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR

MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-201: PARTICULAR REQUIREMENTS FOR

CONTROL EQUIPMENT - Edition 2 - Issue Date 2018/02/01

The certification number of the certified equipment according to OrdLoc certification is:

• E214107

According to the standards listed above, this equipment is certified with the following marking:

HGP 115 Communication Gateway Safety and Compliance Information SP2774 1.0 en-US

This page intentionally left blank

last page

Box 4126

300 04 Halmstad, Sweden

[email protected] SP2774 1.0 en-US / 2020-02-04 / 17005

Inhaltsverzeichnis

Andere HMS Tor Handbücher

HMS

HMS Netbiter EasyConnect Series Bedienungsanleitung

HMS

HMS Intesis Modbus Server Bedienungsanleitung

HMS

HMS Intesis INKNXMBM1000100 Montageanleitung

HMS

HMS Anybus X-gateway Bedienungsanleitung

HMS

HMS AnyBus-X J1939 Bedienungsanleitung

HMS

HMS AB9008 Bedienungsanleitung

HMS

HMS Intesis INBACSAM004O000 Bedienungsanleitung

HMS

HMS eWON Netbiter EC300 Series Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC220 Technisches Datenblatt

HMS

HMS Intesis KNX Bedienungsanleitung

HMS

HMS Anybus Communicator IIoT Benutzerhandbuch

HMS

HMS Intesis KNX HITACHI VRF Bedienungsanleitung

HMS

HMS Ixxat CAN@net NT 420 Bedienungsanleitung

HMS

HMS Ewon Cosy+ Bedienungsanleitung

HMS

HMS Anybus Modbus-TCP/RTU Gateway Bedienungsanleitung

HMS

HMS Anybus-X Bedienungsanleitung

HMS

HMS Ixxat SG-gateway Benutzerhandbuch

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

HMS

HMS Anybus Communicator PROFINET-USS Bedienungsanleitung

HMS

HMS Anybus Communicator CAN PROFINET IRT 2.32 Bedienungsanleitung

HMS

HMS Anybus X-gateway AB7800 Bedienungsanleitung

HMS

HMS Anybus Modbus-TCP/RTU Gateway Bedienungsanleitung

HMS

HMS Intesis INBACDAL1280200 Montageanleitung

HMS

HMS Anybus X-gateway Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt