Homecast HT3000 Bedienungsanleitung
Digital Terrestrial Receiver
Quick Setup Guide – Homecast HT3000
Step 1 – Connect your digital receiver
After unpacking your digital receiver, connect as shown in the diagram below.
Option 1: HDMI
This is the recommended set up.
Option 2: Composite
Option 3: Component
Step 2 – Initial Installation
Once the HT3000 is connected, turn the power on. The receiver will take about 30
seconds to start up. The initial installation screen will show.
Select your preferred language
Select your television type
Select your cable type ( for PLASMA & LCD only )
Step 3 – Tuning
Automatic tuning will begin.
Once tuning is completed, the receiver with resume in normal mode and begin showing
the first channel.
And that’s it. You are now ready to enjoy the Freeview experience!
If you have any problems we recommend you check your aerial connection. If you
still can’t get a picture one of the installers listed on the installer directory on our website
should be able to help.
www.freeviewnz.tv
Andere Handbücher für HT3000
1
Inhaltsverzeichnis
Andere Homecast Empfänger Handbücher
