HoMedics BPA-060 Bedienungsanleitung

BPA-060

Ver. C

El manual en español

empieza en la página 34

Automatic

Blood Pressure Monitor

Your Product At:

www.homedics.com/register

Your valuable input regarding this

product will help us create

the products you will

want in the future.

1 2

Important Notes Regarding Your

Blood Pressure Measurement..........................24

Care, Maintenance & Cleaning .........................25

Potential for Electromagnetic Interference .....27

Electromagnetic Compatibility (EMC)..............28

Troubleshooting.................................................30

Specifications ....................................................31

5 Year Limited Warranty....................................32

TABLE OF CONTENTS

INTRODUCTORY INFORMATION:

Important Product Notices and Safety

Instructions ..........................................................3

About Blood Pressure.........................................5

Blood Pressure Standard....................................5

How This Blood Pressure Monitor Works .........7

USAGE INFORMATION:

Name/Function of Each Part ...............................8

Display Explanations...........................................9

Installing Batteries ............................................11

Using the AC Adapter........................................12

Date & Time Set Procedure...............................13

Using the Arm Cuff............................................14

Measurement Procedure...................................17

Risk Category Index ..........................................20

Recalling Values from Memory.........................21

Clearing Values from Memory..........................23

3 4

IMPORTANT PRODUCT NOTICES

AND SAFETY INSTRUCTIONS

When using your blood pressure monitor, basic precautions

should always be followed. Please read and follow all

instructions and warnings before using this product.

Save these instructions for future reference.

• Please note that this is a home healthcare product only

and it is not intended to serve as a substitute for the

advice of a physician or medical professional.

• This device uses oscillometric method to measure systolic

and diastolic blood pressure, as well as heart rate.

• Do not use this device for diagnosis or treatment of any

health problem or disease. Measurement results are for

reference only. Consult a healthcare professional for

interpretation of pressure measurements. Contact your

physician if you have or suspect any medical problem. Do

not change your medications without the advice of your

physician or healthcare professional.

• Proper cuff size is critical for accurate measurements.

Follow the instructions in this manual and printed on

the arm cuff to ensure the appropriate size of cuff is

being used.

• This device may have difficulty determining the proper

blood pressure for pregnant women and for users with

irregular heartbeat, diabetes, poor circulation of blood,

kidney problems or for users who have suffered from a

stroke.

• The pulse display is not suitable for checking the

frequency of heart pacemakers.

• Electromagnetic interference: The device contains

sensitive electronic components. Avoid strong electrical

or electromagnetic fields in the direct vicinity of the device

(e.g. mobile telephones, microwave ovens). These may

lead to temporary impairment of measurement accuracy.

• Consider the electromagnetic compatibility of the device

(ex. power disturbance, radio frequency interference

etc.) Please use this device indoors only.

• Use blood pressure monitor only for its intended use.

• Do not wrap the cuff around body parts other than

your arm.

• Not for use by or on persons under the age of 18.

• Do not use this device on infants, children, or those who

cannot express their own intention.

• Do not plug or unplug the adapter power cord with

wet hands.

• Excessive use may result in blood flow interference,

which is likely to cause uncomfortable sensations, such

as partial subcutaneous hemorrhage, or temporary

numbness to your arm. In general, these symptoms

should not last long. However, if you do not recover in

time, please seek advice from a medical professional.

• Please use only a 6V AC adapter (as specified in this

manual) or 1.5V “AA” alkaline batteries for power supply.

Blood pressure measurements determined with this device are

equivalent to those obtained by a trained observer using the cuff/

stethoscope auscultatory method, within the limits prescribed by

the American National Standard, Manual, electronic, or automated

sphygmomanometers.

5 6

Blood pressure tends to go up and down, even in people

who normally don’t have high readings. If your numbers

stay above the “normal” range most of the time, you may

be at increased risk and should consult your physician.

Although one can easily find where their own blood

pressure readings fall on this table, this monitor comes

equipped with a Risk Category Index that automatically

compares each reading to the defined levels and provides

a helpful cue if your reading falls into one of the stages

that could potentially indicate increased risk. See page 20

for more information on this feature.

Please note that cues provided by this monitor are only

intended to assist you in using this table. The table and

cues are only provided for convenience to help you

understand your non-invasive blood pressure reading as

it relates to the NIH information. They are not a substitute

for a medical examination by your physician. It is

important for you to consult with your physician regularly.

Your physician will tell you your normal blood pressure

range as well as the point at which you may actually be

considered to be at risk.

ABOUT BLOOD PRESSURE

What is Blood Pressure?

Blood pressure is the pressure exerted on the artery

walls while blood flows through the arteries. The pressure

measured when the heart contracts and sends blood

out of the heart is systolic (highest) blood pressure. The

pressure measured when the heart dilates with blood

flowing back into the heart is called diastolic (lowest)

blood pressure.

Why Measure Your Blood Pressure?

Among today’s various health problems, those associated

with high blood pressure are very common. High blood

pressure dangerously correlates with cardiovascular

diseases. Therefore, blood pressure monitoring is

important for identifying those at risk.

BLOOD PRESSURE STANDARD

The table on page 6 contains defined levels for

hypertension that are publicly available from the National

Heart Lung and Blood Institute at the U.S. National

Institutes of Health (NIH) (http://www.nhlbi.nih.gov/health/dci/

Diseases/Hbp/HBP_WhatIs.html). Users can compare their own

blood pressure readings against these defined levels to

determine if they may be potentially at increased risk.

This table is applicable to most adults aged 18 and older.

Category Systolic (mmHg) Diastolic

(mmHg)

Normal Less than 120 and Less than 80

Prehypertension 120-139 or 80-89

High Blood Pressure

Stage 1 140-159 or 90-99

Stage 2 160 or higher or 100 or higher

7 8

HOW THIS BLOOD PRESSURE

MONITOR WORKS

This monitor uses innovative technology to detect your

blood pressure. This technology enables the monitor to

automatically inflate and deflate at the appropriate level

for each individual. With one touch of a button, the cuff

will automatically inflate to block the blood flow through

your artery. Next, the deflation process starts. Please note

that any muscle movement during inflation or deflation

will cause measurement error. When measurement is

complete, the monitor will display your systolic pressure,

diastolic pressure, and pulse readings.

The monitor automatically finds where your measurement

results fall on the NIH’s National Heart Lung and Blood

Institute’s table and provides a cue if your reading falls into

one of the stages that could potentially indicate increased

risk. Please refer to page 20 for more information on this

feature.

NAME/FUNCTION OF EACH PART

Other Accessories: 1 6V DC Output AC Adapter (not included)

4 “AA” size, 1.5V alkaline batteries

Note: Please unload the batteries when operating

with the AC adapter for an extended period of time.

USER-SELECT

Button

START/STOP

Button

MEMORY RECALL

Button

Air Tube

and Connector

DATE/TIME SET

Buttons

Arm Cuffs

LCD Display

Battery Cover

(Located on

bottom of unit)

9 10

User 1: Appears when the monitor is operated by User 1.

User 2: Appears when the monitor is operated by User 2.

Weak Battery Symbol: Appears when batteries should be

replaced.

Pulse Symbol: Shows the heart rate per minute.

Risk Category Index: See page 20 for more information.

Memory Average: Displays average of last 3 readings

DISPLAY EXPLANATIONS

Display Symbols:

START

STOP

START

STOP

START

STOP

START

STOP

Measurement Error: Wrap the cuff correctly and keep

arm steady during measurement. Measure again.

Air Circuit Abnormality: Check cuff connection. Measure

again.

Pressure Exceeding 300 mmHg: Turn the unit off to

clear, then measure again.

Error Determining Measurement Data: Measure again.

System Error: Measure again.

If and any of the following letters and numbers appear in

the area that systolic pressure should be displayed, an error has

occurred with your reading. See Troubleshooting section of this

manual for more information.

Systolic

Pressure

Diastolic

Pressure

Date/Time

Indicator

Heart Rate

11 12

INSTALLING BATTERIES

1. Press down on latch and lift the battery cover to open

the battery compartment.

2. Install or replace 4 “AA” sized alkaline batteries in the

battery compartment according to the indications inside

the compartment.

3. Close the battery cover by pushing in the top end of

the battery door.

Replace the batteries if:

• The weak battery symbol appears on the display.

• Nothing appears on the display when the power is

switched on.

Replace all batteries at one time (as simultaneous set).

Use only 1.5V "AA" alkaline batteries. Remove batteries

when unit is not in use for extended periods of time. Date

and time will need to be reset if batteries are removed

or replaced. Clean contacts on battery and in battery

compartment with a soft dry cloth each time you install

batteries.

Note:

Batteries are hazardous waste. Do not dispose of them

together with the household garbage.

USING THE AC ADAPTER (NOT INCLUDED)

This monitor is designed for operation with batteries or

an optional AC adapter. Please use only with compatible

AC adapter with required voltage and current as indicated

in this manual. Contact HoMedics Consumer Relations at

1-800-466-3342 to purchase a compatible AC adapter.

Note:

•

When the AC adaptor is your main power supply, make

sure the adaptor plug can be easily removed from the unit.

• Please unload the batteries when operating with an AC

adapter for an extended period of time. Leaving the

batteries in the compartment for a long time may cause

leakage, which may lead to damage to the unit.

•

No batteries are needed when operating with an AC adapter.

• Date and time will need to be reset if AC adapter is

unplugged and unit is without batteries.

Connect the AC adapter with the AC adapter jack in

the back of the unit as shown below.

AC Adapter

Input: 100-240V~0.18A 50/60Hz

Output: 6V DC 1A 6W Max

Connect

AC Adapter

here

Battery

Cover

13 14

USING THE ARM CUFF

Very Important: Proper cuff size is critical to

accurate measurement.

This monitor comes with two sizes of arm cuffs:

Standard Size Fits 9”–13” (23 cm – 33 cm)

Large Size Fits 13”–17” (33 cm – 43 cm)

The appropriate cuff is suitable for your use if the

colored arrow falls within the solid color line as

shown below.

DATE & TIME SET PROCEDURE

1. To adjust the date and time, press the DATE/TIME SET

button ( ).

2. The display will show a blinking number showing the

MONTH. Change the MONTH by pressing the +button.

Each press will increase the number by one in a cycling

manner. Press the DATE/TIME SET button ( ) again

to confirm the entry, and the screen will show a blinking

number representing the DAY.

3. Change the DAY, HOUR and MINUTE as described

in Step 2 above, using the +button to change the

numbers and the DATE/TIME SET button ( ) to

confirm the entries.

Press the button

blinking MONTH

increasing MONTH

confirm the entry

repeat process to set

DAY, HOUR and MINUTE

ARROW MUST FALL

WITHIN YELLOW BAND

ARROW MUST FALL

WITHIN YELLOW BAND

Center tube over

middle of arm

Position cuff

edge 0.6˝

–

1.0˝

(1.5

–

2.5cm)above elbow.

Center tube over

middle of arm.

Fit cuff securely. Allow roo mf or

two fingers to fit between the c uff

and your arm.

Solid Colored Line

Colored Arrow

15 16

1. If the cuff is not assembled, pass the end of the

cuff furthest away from the tubing through the metal

D-ring in order to form a loop. The smooth side without

the felt material should be on the inside of the cuff loop.

2. Plug the cuff tube into the left side of the unit.

3. Open the arm cuff so that your arm may be placed

through it.

4. Remove tight fitting clothing from your upper left arm

so that the cuff can be wrapped around your exposed

arm.

5. Position cuff edge 0.8-1.2

inches (2-3 cm) above elbow.

6. Center tube over middle of arm.

7. Pull the end of the cuff so that it tightens

evenly around your arm. Press the hook

and loop material together to secure.

Allow room for 2 fingers to fit between

the cuff and your arm.

8. Lay your arm on a table (palm upward)

so the cuff is at the same height as your

heart. Make sure the tube is not kinked.

Note:

• The device should not be used when your arm is

wounded or injured.

• If it is not possible to fit the cuff to your left arm, it

can also be placed on your right arm. However, all

measurements should be made using the same arm.

• To use on the right arm, you must position the artery

symbol “ ” over the main artery. Locate the main

artery by pressing with two fingers approximately 1”

(2 cm) above the bend of your

elbow on the inside of your

right arm. Identify where the

pulse can be felt the strongest.

This is your main artery.

ARROW MUST FALL

WITHIN YELLOW BAND

D-ring

End of cuff

Insert plug here

Main Artery

2~3cm

(0.8”~1.2”)

Positioncuff edge

0.8

–

1.2inches(2

–

3cm)

aboveelbow.

Fitcuff

Allow

tofi

and

Cen

17 18

MEASUREMENT PROCEDURE

Important Notes:

• Blood pressure changes with every heartbeat and is in

constant fluctuation throughout the day.

• Blood pressure measurement can be affected by the

position of the user, his or her physiologic condition

and other factors. For greatest accuracy, wait 1 hour

after exercising, bathing, eating, drinking beverages

with alcohol or caffeine, or smoking to measure blood

pressure.

• Before measurement, it is suggested that you sit

quietly for 15 minutes as measurements taken during

a relaxed state will have greater accuracy. You should

not be physically tired or exhausted while taking a

measurement.

• During the measurement, do not talk or move your arm

or hand muscles.

• See page 24 for additional notes regarding your blood

pressure measurement.

1. Press the USER-SELECT button to choose User 1

or User 2.

2. With the cuff wrapped around your arm, press the

START/STOP button. Do not inflate the cuff unless it

is wrapped around your arm. All digits will light up to

check the display functions. The checking procedure

will be completed after about 3 seconds.

3. After all symbols disappear, the display will show

“00”. The monitor is “Ready to Measure” and will

automatically inflate the cuff to begin measurement.

The cuff will then start deflating as measurement

continues.

If you are using this blood pressure monitor for the first

time, please remove the protective film from the screen.

Andere Handbücher für BPA-060

Inhaltsverzeichnis

Sprachen:

Andere HoMedics Blutdruckmessgerät Handbücher

HoMedics

HoMedics BPA-300 Bedienungsanleitung

HoMedics

HoMedics BPW-1000-EU Bedienungsanleitung

HoMedics

HoMedics HL858DM Bedienungsanleitung

HoMedics

HoMedics BPW-200-0 TheraP Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

HoMedics

HoMedics Walgreens BPS-420WGN Bedienungsanleitung

HoMedics

HoMedics BPA-060-DDM Bedienungsanleitung

HoMedics

HoMedics BPA-110 Bedienungsanleitung

HoMedics

HoMedics THERA-P BPA-200 Bedienungsanleitung

HoMedics

HoMedics THERA P BPW-051DDM Bedienungsanleitung

HoMedics

HoMedics BPW-260 Bedienungsanleitung

HoMedics

HoMedics BPW-101 Bedienungsanleitung

HoMedics

HoMedics BPW-715 Bedienungsanleitung

HoMedics

HoMedics HL158B1-BD Bedienungsanleitung

HoMedics

HoMedics THERA P BPW-050 Bedienungsanleitung

HoMedics

HoMedics BPA-3000-EU Bedienungsanleitung

HoMedics

HoMedics BPW-040 Bedienungsanleitung

HoMedics

HoMedics Walgreens BPA-430WGN Bedienungsanleitung

HoMedics

HoMedics BPA-060 Bedienungsanleitung

HoMedics

HoMedics Thera P BPA-150 Bedienungsanleitung

HoMedics

HoMedics BPW-360BT Bedienungsanleitung

HoMedics

HoMedics BPW-370BT Bedienungsanleitung

HoMedics

HoMedics Walgreens WGNBPA-755BT Bedienungsanleitung

HoMedics

HoMedics BPW-1000-EU Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung