HoMedics Walgreens WGNBPW-910 Bedienungsanleitung

AUTOMATIC WRIST

Blood Pressure

Monitor

• 5-Year

Limited

Warranty

WGNBPW-910

Ver. A

El manual en español

empieza en la página 34

Risk Category Index...................................... 19

Irregular Heartbeat Detector (IHB) .............. 20

Recalling Values from Memory..................... 21

Clearing Values from Memory ...................... 21

Important Notes Regarding Your

Blood Pressure Measurement...................... 22

Care, Maintenance & Cleaning ..................... 23

Potential for Electromagnetic

Interference.................................................... 25

Electromagnetic Compatibility (EMC).......... 26

Troubleshooting............................................. 28

Specifications ................................................ 29

5 Year Limited Warranty ................................ 31

TABLE OF CONTENTS

INTRODUCTORY INFORMATION:

Important Product Notices and

Safety Instructions .......................................... 3

About Blood Pressure..................................... 5

Blood Pressure Standard................................ 6

How This Blood Pressure

Monitor Works.................................................. 7

USAGE INFORMATION:

Name/Function of Each Part ........................... 8

Display Explanations....................................... 9

Installing Batteries ........................................ 11

Date & Time Set Procedure........................... 13

Applying the Cuff........................................... 14

Correct Measurement Posture ..................... 15

Measurement Procedure............................... 16

IMPORTANT PRODUCT NOTICES AND

SAFETY INSTRUCTIONS

When using your blood pressure monitor, basic precautions

should always be followed. Please read and follow all

instructions and warnings before using this product. Save

these instructions for future reference.

• Please note that this is a home healthcare product only

and it is not intended to serve as a substitute for the

advice of a physician or medical professional.

• This device uses the oscillometric method to measure

systolic and diastolic blood pressure, as well as heart rate.

• Do not use this device for diagnosis or treatment of any

health problem or disease. Measurement results are

for reference only. Consult a healthcare professional for

interpretation of blood pressure measurements. Contact

your physician if you have or suspect any medical

problem. Do not change your medications without the

advice of your physician or healthcare professional.

• This product is not suitable for people with arrhythmias.

This device may have difficulty determining the proper

blood pressure for pregnant women, individuals with

irregular heartbeat, diabetes, poor circulation of blood,

kidney problems or for users who have suffered from a

stroke.

• Excessive use may result in blood flow interference, which

is likely to cause uncomfortable sensations, such as partial

subcutaneous hemorrhage, or temporary numbness to

your wrist. In general these symptoms should not last

long. However, if you do not recover in time, please seek

advice from a medical professional.

• Consult your physician before measuring blood

pressure at the wrist if you have any of the following

conditions: Severe hypertension, severe diabetes, severe

arteriosclerosis, severe kidney disease or vascular disease

that may compromise circulation.

• The pulse display is not suitable for checking the frequency

of heart pacemakers.

• Electromagnetic interference: The device contains

sensitive electronic components. Avoid strong electrical or

electromagnetic fields in the direct vicinity of the device (e.g.

mobile telephones, microwave ovens). These may lead to

temporary impairment of measurement accuracy.

• Consider the electromagnetic compatibility of the device

(ex. power disturbance, radio frequency interference etc.)

Please use this device indoors only.

• Use blood pressure monitor only for its intended use.

• Do not wrap the cuff around body parts other than your

wrist.

• Not for use by or on persons under the age of 18.

• Do not use this device on infants, children, or those who

cannot express their own intention.

• Use only 1.5V “AAA” alkaline batteries for power supply.

Blood pressure measurements determined with this device

are equivalent to those obtained by a trained observer using

the cuff/stethoscope auscultatory method, within the accuracy

limits prescribed by the American National Standard, Manual,

electronic, or automated sphygmomanometers.

ABOUT BLOOD PRESSURE

What is Blood Pressure?

Blood pressure is the pressure exerted on the artery walls while

blood flows through the arteries. The pressure measured when

the heart contracts and sends blood out of the heart is systolic

(highest) blood pressure. The pressure measured when the

heart dilates with blood flowing back into the heart is called

diastolic (lowest) blood pressure.

Why Measure Your Blood Pressure?

Among today’s various health problems, those associated with

high blood pressure are very common. High blood pressure

dangerously correlates with cardiovascular diseases. Therefore,

blood pressure monitoring is important for identifying those at risk.

Why Do My Readings Vary?

Blood pressure is a body parameter that is subject to normal

variations throughout the day. A single reading that is different from

yours or your doctor’s readings are not necessarily inaccurate. The

average of several readings, taken under similar conditions, using

the same arm is preferred for accurate blood pressure readings.

Why Are My Readings Different Than Those Taken

at My Doctor's Office?

Many experience a phenomenon called “White Coat Hypertension”

when measured by a doctor. White Coat Hypertension refers to

blood pressure that rises above its usual level when measured in a

clinical setting, such as a doctor's office.

BLOOD PRESSURE STANDARD

The table below contains defined levels for hypertension that

are publicly available from the National Heart Lung and Blood

Institute at the U.S. National Institutes of Health (NIH)

(http://www.nhlbi.nih.gov/health/dci/Diseases/Hbp/HBP_

WhatIs.html). Users can compare their own blood pressure

readings against these defined levels to determine if they may

be potentially at increased risk.

This table is applicable to most adults aged 18 and older.

Blood pressure tends to go up and down, even in people who

normally don’t have high readings. If your numbers stay above

the “normal” range most of the time, you may be at increased

risk and should consult your physician.

Although one can easily find where their own blood pressure

readings fall on this table, this monitor comes equipped with

a Risk Category Index that automatically compares each

reading to the defined levels and provides a helpful cue if

your reading falls into one of the stages that could potentially

indicate increased risk. See page 19 for more information on

this feature.

Category Systolic (mmHg) Diastolic (mmHg)

Normal Less than 120 and Less than 80

Prehypertension 120-139 or 80-89

High Blood Pressure

Stage 1 140-159 or 90-99

Stage 2 160 or higher or 100 or higher

Please note that cues provided by this monitor are only

intended to assist you in using this table. The table and cues

are only provided for convenience to help you understand your

non-invasive blood pressure reading as it relates to the NIH

information. They are not a substitute for a medical examination

by your physician. It is important for you to consult with your

physician regularly. Your physician will tell you your normal

blood pressure range as well as the point at which you may

actually be considered to be at risk.

HOW THIS BLOOD PRESSURE

MONITOR WORKS

This monitor uses innovative technology to detect your blood

pressure. This technology enables the monitor to automatically

inflate and deflate at the appropriate level for each individual.

With one touch of a button, the cuff will automatically

inflate to block the blood flow through your artery. Once the

measurement is complete, the cuff will automatically deflate.

Please note that any muscle movement during inflation will

cause measurement error. When measurement is complete, the

monitor will display your systolic pressure, diastolic pressure,

and pulse readings.

The monitor automatically finds where your measurement results

fall on the NIH’s National Heart Lung and Blood Institute’s table

and provides a cue if your reading falls into one of the stages that

could potentially indicate increased risk. See page 19 for more

information on this feature.

The appearance of the icon indicates that a pulse

irregularity consistent with an irregular heartbeat was detected

during measurement. Refer to page 20 for more information on the

Irregular Heartbeat Detector.

NAME/FUNCTION OF EACH PART

Accessories for unit :

2 “AAA” size, 1.5V alkaline

batteries included with the

unit.

MEMORY

RECALL

Button

Wrist Cuff

Battery Cover START/STOP

Button

LCD Display

Note:

The START/STOP and M buttons are also used to set the date

and time.

DISPLAY EXPLANATIONS

Systolic

Pressure

Diastolic

Pressure

Date/Time Indicator

Heart Rate

Display Symbols:

Weak Battery Symbol: Appears when batteries

should be replaced.

Pulse Symbol: Shows the heart rate per minute.

Irregular Heartbeat Detector: See page 20 for

more information.

Risk Category Index: See page 19 for more

information.

Measurement Error: Wrap the cuff correctly and

keep wrist steady during measurement. Measure

again.

Air Circuit Abnormality: Measure again.

Pressure Exceeding 300 mmHg: Switch the unit

off to clear, then measure again.

Error Determining Measurement Data: Measure

again.

System Error: Measure again.

If and any of the following letters and numbers

appear in the area that systolic pressure should be

displayed, an error has occurred with your reading.

See Troubleshooting section of this manual for more

information.

(No Symbol)

INSTALLING BATTERIES

1. The battery cover is located along the

side of the monitor. Remove battery

cover by pressing down and pulling

away from the monitor.

2. Install batteries according to the

polarity indications inside the

compartment (as shown in Fig. 2).

Battery Type: 2 Alkaline (LR03)

“AAA” size.

3. Insert the other battery, according

to the polarity indications inside the

compartment (as shown in Fig. 3).

4. Replace the cover by inserting it

back into place.

Replace the batteries if:

• The weak battery symbol appears on the display.

• Nothing appears on the display when the power is

switched on.

Note:

• Date and time will need to be reset if batteries are

removed or replaced.

• Replace all batteries at one time (as simultaneous

set). Use only 1.5V “AAA” alkaline batteries.

• When the batteries are removed, the measurement

values stored in memory are retained. However, the

date and time must be re-set.

• Remove batteries when unit is not in use for extended

periods of time.

• Clean contacts on battery and in battery

compartment with a soft dry cloth each time you

install batteries.

• Batteries are hazardous waste. Do not dispose of

them together with the household garbage.

1413

DATE & TIME SET PROCEDURE

1. To adjust the date and time, press and hold the START/

STOP button for 3 seconds.

2. The display will show a blinking number showing

the MONTH. Change the MONTH by pressing the M

button. Each press will increase the number by one in

a cycling manner. Press the START/STOP button again

to confirm the entry, and the screen will show a blinking

number representing the DAY.

3. Change the DAY, YEAR, HOUR, & MINUTE as described

in Step 2. above, using the M button to change the

numbers and the START/STOP button to confirm the

entries.

Press & hold

START/STOP button

blinking MONTH

increasing MONTH

confirm the entry

START

STOP

repeat process to set DAY, YEAR,

HOUR, & MINUTE

START

STOP

APPLYING THE CUFF

1. Remove all watches, wrist jewelry, etc. prior to attaching

the wrist monitor. Clothing sleeves

should be rolled up and the cuff should

be wrapped around bare skin for

correct measurements.

2. Apply cuff to left wrist with palm facing

up as shown in Fig. A.

3. Make sure the edge of the cuff is about

1/4”~1/2” (1 cm) from the palm as

shown in Fig. B.

4. In order to ensure accurate

measurements, fasten the hook and

loop strap securely around your wrist so

there is no extra space between the cuff

and the wrist. If the cuff is not wrapped

tight enough, the measurement values

will not be accurate.

5. If your physician has diagnosed you

with poor circulation in your left arm,

place the cuff around your right wrist as

shown in Fig. C.

Note:

• This device should not be used when your wrist is

wounded or injured.

• If it is not possible to use the cuff on your left wrist,

it can also be used on your right wrist. However, all

measurements should be made using the same wrist.

Fig. A

Fig. B

Fig. C

15 16

CORRECT MEASUREMENT POSTURE

1. Place your elbow on a table

so that the cuff is at the same

level as your heart as shown in

Fig. A. Relax your entire body,

especially between your elbow

and fingers.

Note: Your heart is located

slightly below your armpit.

2. If the cuff is not at the same

level as your heart or if

you cannot keep your arm

completely still throughout the

reading, use a soft object such

as a folded towel to support

your wrist as shown in Fig. B.

3. Turn your palm upwards.

4. Sit upright in a chair with feet flat

on the floor, and take 5-6 deep

breaths.

Avoid leaning back while the

measurement is being taken as

shown in Fig. C.

Fig. A

Fig. B

Fig. C

(X)

MEASUREMENT PROCEDURE

Notes:

• Blood pressure changes with every heartbeat and is in

constant fluctuation throughout the day.

• Blood pressure measurement can be affected by the

position of the user, his or her physiologic condition

and other factors.

Before Measurement

To help ensure an accurate reading, follow these

instructions before taking a measurement:

• Wait 1 hour after exercising, bathing, eating, drinking

beverages with alcohol or caffeine, or smoking to

measure blood pressure.

• Sit quietly and rest for 15 minutes.

• Stress raises blood pressure. Avoid taking

measurements during stressful times.

• Take your reading in a comfortable environment

as measurements can be affected by hot or cold

temperatures. Take your blood pressure at normal

body temperature.

During Measurement

• Do not talk or move your arm or hand muscles.

• Do not cross your legs. Sit with feet flat on the floor.

• Dot not touch cuff or monitor during measurement.

1. With the cuff wrapped around your wrist, press the

START/STOP button. Do not inflate the cuff unless

it is wrapped around your wrist. All digits will light

up, checking the display functions. The checking

procedure will be completed after about 3 seconds.

2. After all symbols disappear, the display will show “00”.

The monitor is “Ready to Measure” and will

automatically inflate the cuff to begin measurement.

START

STOP

3. When the measurement is completed, the cuff

will deflate entirely and systolic pressure, diastolic

pressure and pulse will be shown simultaneously

on the LCD screen. The measurement is then

automatically stored into memory.

Note:

• This monitor automatically turns off approximately 1

minute after last operation. You may also press the

START/STOP button to turn the unit off.

• To interrupt the measurement, you may press the

START/STOP (recommended) or the M buttons.

The cuff will deflate immediately after a button is

pressed.

Inhaltsverzeichnis

Sprachen:

Andere HoMedics Blutdruckmessgerät Handbücher

HoMedics

HoMedics BPA-110 Bedienungsanleitung

HoMedics

HoMedics BPA-740-CA Bedienungsanleitung

HoMedics

HoMedics Relion WMTBPA-845 Bedienungsanleitung

HoMedics

HoMedics HL158B1-BD Bedienungsanleitung

HoMedics

HoMedics Walgreens 518728 Bedienungsanleitung

HoMedics

HoMedics BPA-960BT Bedienungsanleitung

HoMedics

HoMedics BPA-3000-EU Bedienungsanleitung

HoMedics

HoMedics Walgreens BPS-420WGN Bedienungsanleitung

HoMedics

HoMedics BPW-060 Bedienungsanleitung

HoMedics

HoMedics THERA-P BPA-200 Bedienungsanleitung

HoMedics

HoMedics HL858DM Bedienungsanleitung

HoMedics

HoMedics BPW-715 Bedienungsanleitung

HoMedics

HoMedics BPA-060 Bedienungsanleitung

HoMedics

HoMedics TMB-1491-S Bedienungsanleitung

HoMedics

HoMedics BPW-060-CA Bedienungsanleitung

HoMedics

HoMedics THERA-P BPA-200 Bedienungsanleitung

HoMedics

HoMedics BPA-110 Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

HoMedics

HoMedics BPW-201 Ver. B Bedienungsanleitung

HoMedics

HoMedics HL158VA Bedienungsanleitung

HoMedics

HoMedics HEALTH PLUS BPW-HP010 Bedienungsanleitung

HoMedics

HoMedics BPW-710-CA Bedienungsanleitung

HoMedics

HoMedics BPW-410WGN Bedienungsanleitung

HoMedics

HoMedics BPS-420 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung