Honeywell CS07AE Bedienungsanleitung

Portable Evaporative Air Cooler

User Manual

Read and save these instructions before use

www.honeywellaircoolers.com

E-mail: info@honeywellaircoolers.com

Model: CS07AE

PARTS DESCRIPTION

1) Control Panel 7) Water Tank

2) Handle 8) Rear Grill

3) Louvers 9) Rear Grill Screw

4) Power Cord & Plug 10) Honeycomb Cooling Media

5) Water Level Indicator 11) Water Fill Door

6) Casters 12) Drain Plug

WARNING -- READ AND SAVE THE AIR COOLER SAFETY & MAINTENANCE GUIDE AND USER

MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY

DAMAGE AND/ OR IMPAIR ITS OPERATION AND VOID THE WARRANTY. IN CASE THERE IS

ANY INCONSISTENCY OR CONFLICT BETWEEN THE ENGLISH VERSION AND ANY OTHER

LANGUAGE VERSION OF THE CONTENT OF THIS MATERIAL, THE ENGLISH VERSION SHALL

PREVAIL.

123

0.5

USE & OPERATION

CONTROL PANEL

Icons on Display Screen

Power ON / OFF

Swing

Fan speed

1 = Low

2 = Medium

3 = High

N = Normal

R = Random

S = Sleep

Cool

Timer Setting

Wind Type

USE & OPERATION

POWER

Press the button to turn the unit on. The cooler will start automatically at medium speed. After a

few seconds the speed will switch to low. To turn the unit off, press the button again.

SWING

Press the button until the indicator light is illuminated on the control

panel. The louvers will begin to move left to right automatically.

Vertical Air Flow - You can manually adjust the louvers to change vertical air ﬂow.

FUNCTION BUTTONS

COOL

Press the button until the indicator light is illuminated on the control

panel. This activates evaporative cooling. The water pump will operate and you

will feel the cooler air after the Honeycomb Cooling Media is completely wet.

When the indicator light is switched OFF, the unit can still function in a fan

only mode (without evaporative cooling).

TIMER

Press the button until the desired time duration setting is selected. When the set time has passed,

the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged from

electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.

SPEED

Press the button repeatedly to change the speed between 3 - 2 - 1.

The indicator light will show the selected speed:

WIND TYPE

Press the button to select your desired wind type: N - R - S.

You can select either High, Medium or Low fan speeds.

The fan speed alternates between High, Medium and Low and off to mimic a natural

breeze.

This mode is for comfort during the night. When SLEEP mode is selected, the

airflow will start at a higher speed for 30 minutes and reduce to a lower speed

for 30 minutes. When the speed reaches Low speed, the fan will run in low speed

continuously until you switch OFF the unit. You may set the starting speed to be

High, Medium or Low. If you start the SLEEP mode with High speed, the fan will run

for 30 minutes in High speed, then 30 minutes in Medium speed and ﬁnally switch

to Low speed continuously. If you start the SLEEP mode with Medium speed, then

the fan will run for 30 minutes in this speed before changing to a continuous Low

speed.

Normal (N)

Random (R)

Sleep (S)

LOUVER

MOVEMENT

Low (1)Medium (2)High (3)

USE & OPERATION (CONTINUED)

REMOTE CONTROL

ON / OFF

COOL

SWING

TIMER

SPEED

WIND TYPE

POWER :

ON / OFF

Controls cooling or fan option

Controls the motion of the louvers

Controls the Timer function for automatic off

Switch between Normal, Random & Sleep

Low / Medium / High

COOL

SWING

WIND TYPE

SPEED

TIMER

NOTE:

•

The remote control requires AAA (2 x 1.5V) batteries for replacement.

Open the battery compartment at the back of the remote control and insert the batteries inside.

Care must be taken to insert the batteries according to the correct polarity (+ / –) markings

shown inside the battery compartment.

Always point the remote control signal transmitter towards the unit when operating. Make sure

that the signal path is not obstructed.

Remove the batteries if the unit is not going to be used for an extended period of time.

Do not drop the remote control.

Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.

Do not mix old and new batteries.

Do not recharge the battery.

Exhausted batteries are to be removed from the product and safely disposed of as per local

regulations.

Do not dispose of batteries in ﬁre. Batteries may explode or leak.

WARNING: Caution for ingestion of the small battery. Keep away from children and animals.

CAUTION:

Unplug the unit from the electrical power outlet before emptying or reﬁlling the water tank.

Open the Water Fill Door located on the back of the unit.

The Water Level Indicator is located at the front of the unit. Reﬁll the water

tank when water level is low. Do not ﬁll water above the "Max." water level

mark to avoid water droplets collecting on the louvers. Check the water

level in the tank before running the COOL function. Make sure that the

water in the tank is above the minimum water level mark. Running the unit

in COOL mode with inadequate water may cause pump failure.

Note: The water capacity refers to the total volume of water that can be contained within the air

cooler water tank and water distribution system. The water capacity in the tank at the “Max.” indicator

level may be lower than the actual water capacity of the air cooler.

WARNING: Do not ﬁll water tank with dirty water or salt water. This can damage the unit and Honeycomb

media.

USE & OPERATION (CONTINUED)

COOLER LOCATION

FILLING WITH WATER

Make sure to position the air cooler correctly before you set up and start using the product. Please

refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide.

Water Fill Door

Move the unit to a location where the water can be drained. Remove the cap from the Drain plug

located at the bottom of the unit. Allow the tank to empty.

Reﬁll the water tank with clean water, up to the maximum level and drain it completely.

Use a damp cloth to remove the dirt and dust from the surface of the unit. Never use corrosive

elements or chemicals to clean this product.

When the product is not in use, store the unit in a dry place out of direct sunlight.

•

USE & OPERATION (CONTINUED)

Below are instructions on how to clean and maintain your air cooler. If the cooler will not be used for

a long period of time, please refer to the STORAGE & MAINTENANCE GUIDELINES located in the

separate Safety & Maintenance Guide.

WARNING:

Before cleaning the unit, switch the unit OFF and disconnect from the electrical socket.

CLEANING & DRAINING THE WATER TANK

USE & OPERATION (CONTINUED)

CLEANING THE Carbon Dust Filter* AND HONEYCOMB COOLING MEDIA

The appliance is supplied with a Carbon Dust Filter* and Honeycomb Cooling Media.

The Carbon Filter* and Honeycomb Cooling Media are located inside the Rear Grill. See Figure 1

for instructions on how to remove them from the unit for cleaning and maintenance.

Do not run the unit in COOL mode with stale water in the tank. You must empty the water tank

and reﬁll with fresh water, especially if the tank has not been cleaned in a long time.

The cleaning frequency for the Honeycomb media depends on local air and water conditions.

In areas where the mineral content of water is high, mineral deposits may build up on the

Honeycomb Cooling Media and restrict air ﬂow. Draining the water tank and reﬁlling with fresh

water at least once a week will help reduce mineral deposits. If mineral deposits remain on the

Honeycomb Cooling Media, the media should be removed and washed under fresh water. The

media should be cleaned every two months or sooner, depending on your needs.

For best results allow the Honeycomb Cooling Media to dry after each use by turning off the cool

function 15 minutes before turning the unit off.

•

Remove all the screws from the Rear Grill of the

Air Cooler.

Carefully pull out the Rear Grill from the cooler.

Slide out the Carbon Filter* and clean with water.

To release the Honeycomb Media, remove the

Rear Frame screws and pull the Rear Frame away

from the unit.

Remove the screws from the bottom Honeycomb

Frame and slide out the Honeycomb Cooling

Media. Replace or clean media with water and a

damp cloth as needed.

Removing the Carbon Dust Filter*/ Honeycomb Cooling Media:

WARNING: DO NOT operate the Air Cooler when

the Rear Grill, Rear Frame or Honeycomb Frame is

removed from the Air Cooler, or if any of these are

loose-fitting on the air cooler. Doing so can cause

serious injury or dangerous electric shock.

*Applicable for models with Carbon Dust Filter only.

Figure 1:

Rear Grill

Honeycomb

Cooling Media

Honeycomb

Frame

Rear Frame

Screws Carbon Dust

Filter

JMATEK Limited

Manulife Financial Centre,

Kwun Tong, Hong Kong

Phone: 85225595522

Email: [email protected]

Web: www.jmatek.com

Made in China

The Honeywell Trademark is used under license

from Honeywell International Inc.

Honeywell International Inc. makes no

representations or warranties with respect to this product.

This product is manufactured by Airtek Int'l Corp. Ltd.

(subsidiary of JMATEK Ltd.).

Inhaltsverzeichnis

Andere Honeywell Klimaanlage Handbücher

Honeywell

Honeywell MN09 Series Bedienungsanleitung

Honeywell

Honeywell TC30PE Series Bedienungsanleitung

Honeywell

Honeywell CL25AE Bedienungsanleitung

Honeywell

Honeywell CO60PM Series Bedienungsanleitung

Honeywell

Honeywell CO60PM Series Betriebsanleitung

Honeywell

Honeywell MN1CFS8 Bedienungsanleitung

Honeywell

Honeywell ES800I Bedienungsanleitung

Honeywell

Honeywell MM Series Bedienungsanleitung

Honeywell

Honeywell CL30XC Bedienungsanleitung

Honeywell

Honeywell MN09CES Bedienungsanleitung

Honeywell

Honeywell CO48PM Bedienungsanleitung

Honeywell

Honeywell CL201AE Bedienungsanleitung

Honeywell

Honeywell MM14CHCS Bedienungsanleitung

Honeywell

Honeywell MF08CESWW Bedienungsanleitung

Honeywell

Honeywell HW-QUICK12E Bedienungsanleitung

Honeywell

Honeywell TC10PE Bedienungsanleitung

Honeywell

Honeywell Genetron ST-20 Bedienungsanleitung

Honeywell

Honeywell MM14CCS Bedienungsanleitung

Honeywell

Honeywell CL152 Bedienungsanleitung

Honeywell

Honeywell CL202PEUI Bedienungsanleitung

Honeywell

Honeywell USHA CL50PM Bedienungsanleitung

Honeywell

Honeywell CL25AE Bedienungsanleitung

Honeywell

Honeywell MP10CESWW Bedienungsanleitung

Honeywell

Honeywell CO25MM Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung