Honeywell HWAC-1217S Bedienungsanleitung

HWAC-1217S

HWAC-1817S

HWAC-2417S

Professional Installation Required!

Please read and retain these instructions.

Mini-Split Air Conditioner

Single Zone

Installation and Operations Manual

CONTENTS

Thank you for purchasing the HWAC-1217S, HWAC-1817S, or

HWAC-2417S Mini-Split Air Conditioner.

This manual will provide you with safety information, installation steps,

instructions for optimal use, and proper care and maintenance

for your product. Please read this manual carefully before operating.

MODEL HWAC-1217S HWAC-1817S HWAC-2417S

Cooling Capacity

Heating Capacity

12,000 BTU Cooling

12,500 BTU Heating

18,000 BTU Cooling

18,000 BTU Heating

23,000 BTU Cooling

24,000 BTU Heating

SEER Rating 17 17 17

Room Size (Sq. ft.) 300-500 600-800 900-1,200

Voltage / Frequency 115V / 60 Hz 230V / 60 Hz 230V / 60 Hz

Dehumidification 2.11 pnt/h 3.38 pnt/h 6.34 pnt/h

Operating Sound Level Indoor Unit: 42 dB

Outdoor Unit: 52 dB

Indoor Unit: 46 dB

Outdoor Unit: 55 dB

Indoor Unit: 49 dB

Outdoor Unit: 55 dB

Ambient Range 61°F-90°F61°F-90°F61°F-90°F

Refrigerant R410a R410a R410a

Cord Length 14.8 ft. (4.5 m) 14.8 ft. (4.5 m) 14.8 ft. (4.5 m)

Zone Capacity Single Single Single

Indoor Unit Dimensions

(W x D x H)

34.68”W x 8.07”D x

11.65”H

35.40”W x 8.90”D x

12.2”H

42.6”W x 9.17”D x

12.99”H

Outdoor Unit

Dimensions

(W x D x H)

28.74”W x 11.22”D x

21.46”H

31.90”W x 11.80”D x

21.90”H

32.48”W x 12.20”D x

25.79”H

Indoor Unit Weight 22 lbs. 24 lbs. 31 lbs.

Outdoor Unit Weight 57 lbs. 62 lbs. 94 lbs.

Safety Certification cETLus cETLus cETLus

SPECIFICATIONS

Always be careful when using the machine. To reduce the risk of fire, electrical shock, or other

injuries, keep these safety considerations in mind when installing, using, and maintaining your

machine.

WARNING

1. The air conditioner must be properly grounded on a level surface. Do not connect the grounding wire

to the gas pipeline, water pipeline, lightning rod, or telephone grounding wire.

2. Always switch off the device and cut the power supply when the unit is not in use for a long time.

3. Do not let the remote control or the indoor unit get wet.

4. Make sure the voltage meets the appliance’s electricity requirements.

5. Do not operate if the electrical plug or power cord is damaged.

6. Do not under any circumstances alter the electrical plug.

7. Do not turn off the main power switch during operation with wet hands.

8. Do not share the electrical socket with other appliances.

9. Always switch off the device and cut the power supply before performing any maintenance or

cleaning.

10. Do not yank on the power cable to unplug.

11. An earth leakage breaker with rated capacity must be installed.

12. Do not install the air conditioner in a place where there is flammable gas or liquid. The distance

between them should be more than 4.5 ft.

13. Do not use air conditioner in stormy weather. Power supply should be cut in time to prevent danger.

14. Do not block air inlets or air outlets.

15. Do not insert hands or any objects into the air inlets or air outlets.

16. Please pull on the mounting bracket and check if it is secure to the wall.

17. Don’t let the air conditioner blow against a heater appliance. Otherwise, it will lead to carbon

monoxide poisoning.

18. The appliance shall be installed according to the installation instructions supplied and in accordance

with national wiring regulations.

19. Do not modify any part of this product.

20. Do not operate this appliance for any other purpose other than its intended use.

SAFETY INSTRUCTIONS -INSTALLATION

Always be careful when using the machine. To reduce the risk of fire, electrical shock, or other

injuries, keep these safety considerations in mind when installing, using, and maintaining your

machine.

CAUTION

NOTE:

•This product contains fluorinated greenhouse gases. Never try to interfere with the

refrigerant circuit yourself or disassemble the product yourself and always ask a

professional. The specification of the fuse is printed on the circuit board, such as:

3.15A/250V AC, etc. Refrigerant leakage contributes to climate change. Refrigerant with

lower global warming potential (GWP) would contribute less to global warming than a

refrigerant with higher GWP, if leaked to the atmosphere. This appliance contains a

refrigerant fluid with a GWP equal to [2088]. This means that if 1 kg of this refrigerant fluid

would be leaked to the atmosphere, the impact on global warming would be [2088] times

higher than 1 kg of CO2 , over a period of 100 years.

1. Do not open windows and doors for a long time when the air conditioner is running. This will cause

the cooling or heating capacity to be weakened.

2. Do not stand /sit on top of the outdoor unit and do not place heavy items on it.

3. Do not apply cold air from the unit to the body for a prolonged time.

4. It is recommended that the temperature difference between indoor and outdoor temperature should

not be too large. Appropriate adjustments of the setting temperature can prevent the waste of

electricity.

5. If your air conditioner is not fitted with a supply cord and a plug, an all-pole switch must be installed

in the fixed wiring and the distance between contacts should be no less than 0.1 inch.

6. If your air conditioner is permanently connected to the fixed wiring, a residual current device (RCD)

having rated residual operating current not exceeding 30 mA should be installed in the fixed wiring.

7. The power supply circuit should have leakage protector and air switch of which the capacity should be

more than 1.5 times of the maximum current.

SAFETY INSTRUCTIONS -INSTALLATION

1. Air Inlet Grille

2. Panel

3. Air Filter

4. Air Louvre

5. Air Vent

6. Force Switch

7. Pipe Protector Ring

Indoor Unit, Open view

Outdoor Unit

PRODUCT VIEW

1. Air Outlet Grille

2. Power Cable

3. Connecting Pipe

4. Drain Hose Outlet/Pipe

12k and 24k BTU Version

18k BTU Version

Important Notices

•Before installing, please contact a local HVAC professional. If the unit is not

installed by a registered HVAC contractor, the warranty will be voided. Please

request a copy of the HVAC contractor’s invoice at the end of installation and keep

for your records.

•The air conditioner must be installed by professionals according to the national

wiring rules and this manual.

•To move and install the air conditioner in another place, please contact a certified

HVAC professional.

Requirements for Installation Location

•Avoid places of inflammable or explosive gas leakage or where there are strongly

aggressive gases.

•Avoid places subject to strong artificial electric/magnetic fields.

•Avoid places subject to noise and resonance.

•Avoid severe natural conditions (e.g., heavy lampblack, strong sandy wind, direct

sunshine, or high temperature heat sources).

•Avoid places within the reach of children.

•Allow for a short connection between the indoor and outdoor units.

•Select where it is easy to perform service and repair, also where ventilation is

good.

•The outdoor unit shall not be installed in any way that could occupy an aisle,

stairway, exit, fire escape, catwalk, or any other public area.

•The outdoor unit shall be installed as far as possible from doors, windows, and

plants/trees.

Requirements for the Mounting Plate

•The mounting plate must meet the relevant national or industrial standards in

terms of strength with welding and connection areas rustproofed.

•The mounting plate and its load carry surface shall be able to withstand 4 times

above the weight of the unit, or 440.9 lbs., whichever is heavier.

•The mounting plate of the outdoor unit shall be fastened with an expansion bolt.

•Ensure a secure installation to prevent damage to surrounding areas.

NOTE: Mounting plate not included.

NOTICE FOR INSTALLATION

Electrical Safety Requirements

•Be sure to use the rated voltage and air conditioners dedicated circuit for the

power supply, and the power cord diameter must meet the national requirements.

•When the maximum current of air conditioner is ≥ 16A, it must use the air switch

or leakage protection switch equipped with protection devices.

•The normal operating range is 90%-110% of the local rated voltage.

•The minimum clearance between the air conditioner and the combustibles is 4.5

ft.

•The interconnection cord connects the indoor and outdoor units. You must first

choose the right cable size before preparing it for connection.

•Cable types:

•Outdoor Power Cable: H07RN-F or H05RN-F

•Interconnection Cord: H07RN-F or H05RN-F

Minimum Cross-Sectional Area of Power Cable and Interconnection

Cord

•The size of the interconnection cord, power cable, fuse, and switch needed is

determined by the maximum current of the unit. The maximum current is

indicated on the nameplate located on the side panel of the unit. Refer to this

nameplate to choose the right cable, fuse, or switch.

NOTE: For the number of cores in the cable refer to the detailed wiring diagram adhered on the unit.

NOTICE FOR INSTALLATION

Appliance

Amps

AWG

Rated Current

of Appliance

Nominal Cross-

Sectional Area

10A 18 >3 and ≤6A 0.75mm²

13A 16 >6 and ≤10A 1mm²

18A 14 >10 and ≤16A 1.5mm²

25A 12 >16 and ≤25A 2.5mm²

30A 10 >25 and ≤32A 4mm²

40A 8>32 and ≤40A 6mm²

North America

Other Regions

Requirements for Operations at Raised Height

•When carrying out installation at 6.6 ft. or higher above the base level, safety belts

must be worn and ropes of sufficient strength be securely fastened to the outdoor

unit, to prevent falling that could cause personal injury or death as well as

property loss.

Grounding Requirements

•The air conditioner is the type I electrical appliance and must ensure a reliable

grounding.

•Do not connect the grounding wire to a gas pipe, water pipe, lightning rod,

telephone line, or a circuit poorly grounded to the earth.

•The grounding wire is specially designed and shall not be used for other purpose,

nor shall it be fastened with a common tapping screw.

Others

•The connection method of the air conditioner and the power cord and the

interconnection method of each independent element shall be subject to the

wiring diagram affixed to the machine.

Packing List

NOTICE FOR INSTALLATION

Name Quantity Unit Name Quantity Unit

Indoor Unit 1PC Outdoor Unit 1PC

Remote Controller 1PC Connecting Pipe 2PC

Batteries (7#) 2PC Plastic Tape 1Roll

Instructions 1Set Pipe Protection Ring 1PC

Drain Pipe 1PC Luting (Putty) 1Packet

Packing List of the Indoor Unit

Packing List of the Outdoor Unit

Clearance Requirements for Indoor Installation

INSTALLATION: INDOOR UNIT

5.9 in

7.9 in 7.9 in

78.7 in

NOTE: All measurements should be no less than posted from obstructions.

Mounting Plate

1. The wall for installation of the indoor unit

shall be hard and firm to prevent vibration.

2. Use the “+” type screw to fasten the

mounting plate. Horizontally mount the

mounting plate on the wall and ensure it is

level with the wall.

3. Pull the mounting plate by hand after

installing to confirm if it is solid.

Wall-Through Hole

1. Make a 60-80mm hole as appropriate, where

there are no obstructions for drilling. The

indoor connection pipe should slant

outwardly by 10-20°.

2. To protect the piping and the cables from

being damaged running through the wall,

the pipe protecting ring shall be installed and

sealed with the putty that is included on the

inside wall of the dwelling.

NOTE: Usually, the wall hole is 60mm ~ 80mm. Avoid

wiring and studs to maintain structural integrity of the

enclosure.

Indoor Outdoor

Pipe

Protection

Ring

Andere Handbücher für HWAC-1217S

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Klimaanlage Handbücher

Honeywell

Honeywell CL70PE Bedienungsanleitung

Honeywell

Honeywell TC10PE Bedienungsanleitung

Honeywell

Honeywell MM14CCS Bedienungsanleitung

Honeywell

Honeywell TC09PCE Bedienungsanleitung

Honeywell

Honeywell HL10 Series Bedienungsanleitung

Honeywell

Honeywell MF08CESWW Bedienungsanleitung

Honeywell

Honeywell DLC203AE Series Bedienungsanleitung

Honeywell

Honeywell CO30XE Bedienungsanleitung

Honeywell

Honeywell CS08AM Bedienungsanleitung

Honeywell

Honeywell HL12 Series Bedienungsanleitung

Honeywell

Honeywell CL25AE Bedienungsanleitung

Honeywell

Honeywell CL30XC Bedienungsanleitung

Honeywell

Honeywell CO60PM Series Betriebsanleitung

Honeywell

Honeywell MN10 Series Bedienungsanleitung

Honeywell

Honeywell CL202PEU Bedienungsanleitung

Honeywell

Honeywell HJ12CESV Series Bedienungsanleitung

Honeywell

Honeywell MP10CESWW Bedienungsanleitung

Honeywell

Honeywell TC50PEU Leitfaden

Honeywell

Honeywell CL802PE Bedienungsanleitung

Honeywell

Honeywell CL15AE Betriebsanleitung

Honeywell

Honeywell MN10CED Series Bedienungsanleitung

Honeywell

Honeywell CS10PE Bedienungsanleitung

Honeywell

Honeywell CL201AE Bedienungsanleitung

Honeywell

Honeywell CL20AE Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung