Honeywell 2020 Bedienungsanleitung
™
2020/3820/3820i
Cordless System
User’s Guide
Disclaimer
Honeywell International Inc. (“Honeywell”) reserves the right to make changes
in specifications and other information contained in this document without prior
notice, and the reader should in all cases consult Honeywell to determine
whether any such changes have been made. The information in this publication
does not represent a commitment on the part of Honeywell.
Honeywell shall not be liable for technical or editorial errors or omissions con-
tained herein; nor for incidental or consequential damages resulting from the
furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied, repro-
duced, or translated into another language without the prior written consent of
Honeywell.
©2004-2008 Honeywell International Inc. All rights reserved.
Other product names or marks mentioned in this document may be trademarks
or registered trademarks of other companies and are the property of their
respective owners.
Web Address: www.honeywell.com/aidcwww.honeywell.com/aidc
Microsoft® Pocket PC 2002, Windows®, Windows NT®, Windows 2000,
Windows ME, Windows XP, ActiveSync®, Outlook®, and the Windows logo are
trademarks or registered trademarks of Microsoft Corporation.
The
Bluetooth
®word mark and logos are owned by Bluetooth SIG, Inc.
Product Agency Compliance
USA
FCC Part 15 Subpart C
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
Caution: Any changes or modifications made to this equipment not
expressly approved by Honeywell may void the FCC authorization
to operate this equipment.
UL Statement
UL listed: UL60950-1 for I.T.E product safety.
Canada
Industry Canada
This device complies with Canadian RSS-210.
Operation is subject to the following conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may
cause undesired operation of this device.
Conformité à la règlementation canadienne
Cet appareil ISM est conforme à la norme CNR-210 du Canada.
Son fonctionnement est assujetti aux conditions suivantes :
1. Cet appareil ne doit pas causer de brouillage préjudiciable.
2. Cet appareil doit pouvoir accepter tout brouillage reçu, y compris le
brouillage pouvant causer un fonctionnement indésirable.
cUL Statement
cUL listed: CSA C22.2 No.60950-1-03 for I.T.E product safety.
Europe
The CE marking on the product indicates that this device is in
conformity with all essential requirements of the 1999/5/EC R&TTE
Directive. In addition, complies to 2006/95/EC Low Voltage Directive,
when shipped with recommended power supply.
For CE-related inquiries, please contact:
Honeywell Imaging & Mobility Europe BV
International Inc.
Nijverheidsweg 9-13
5627 BT Eindhoven
The Netherlands
Honeywell shall not be liable for use of our product with equipment (i.e.,
power supplies, personal computers, etc.) that is not CE marked and does
not comply with the Low Voltage Directive. This equipment is intended for
use throughout the European Community and has been assessed to the
following standards:
EN 300 328
EN 301 489-1
EN 301 489-17
EN60950-1
EN60825-1
Waste Electrical and Electronic Equipment
Information
Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL on waste electrical and electronic
equipment (WEEE).
This product has required the extraction and use of natural resources for its
production. It may contain hazardous substances that could impact health
and the environment, if not properly disposed.
In order to avoid the dissemination of those substances in our environment
and to diminish the pressure on the natural resources, we encourage you to
use the appropriate take-back systems for product disposal. Those systems
will reuse or recycle most of the materials of the product you are disposing in
a sound way.
The crossed out wheeled bin symbol informs you that the product
should not be disposed of along with municipal waste and invites you to use
the appropriate separate take-back systems for product disposal.
If you need more information on the collection, reuse, and recycling systems,
please contact your local or regional waste administration.
You may also contact your supplier for more information on the
environmental performances of this product.
Germany
If your product is marked with the GS symbol, then the product has
been issued a GS certificate showing compliance to IEC 60950-1
and IEC 60825-1.
Australia/NZ
C-Tick Statement
Conforms to AS/NZS 3548 EMC requirements.
Japan (2020-5B)
Complies with Technical Regulations Conformity Certification of Specified
Radio equipment.
Mexico
Applicable if NOM logo is marked on product. Conforms
to NOM-019.
Comision Federal de Telecomunicaciones (radio aprobación)
International
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE. The battery should be disposed of by a
qualified recycler or hazardous materials handler. Do not incinerate
the battery or dispose of the battery with general waste materials.
!
Eye Safety Statement (LED)
This device has been tested in accordance with IEC60825-1 LED safety, and
has been certified to be a Class 1 LED device.
Radio Technology
Class II
CB Scheme
Certified to CB Scheme IEC 60950-1.
Solids and Water Protection
The 3820 has a rating of IP41, immunity of foreign particles and dripping
water.
The 3820i has a rating of IP54, immunity of foreign particles and sprayed
water.
Patents
Please refer to product packaging for patent information.
Required Safety Labels
Scanner
Compliance
Label locations
Item Number,
Serial Number
and Revision
Information
location
Base
Compliance
Label locations
Item Number,
Serial Number
and Revision
Information
location
i
Chapter 1 - Getting Started
About This Manual ...................................................... 1-1
Unpacking the System ................................................ 1-1
Models......................................................................... 1-1
Cordless System: Main Components.......................... 1-2
About the Battery ........................................................ 1-2
Proper Disposal of the Battery .............................. 1-3
Base Charge Mode .................................................... 1-4
Linking Image Scanner to Base .................................. 1-5
Image Scanner Modes ................................................ 1-5
Unlinking the Image Scanner ................................ 1-5
Single Image Scanner Operation ................................ 1-6
Locked Link Mode - Single Image Scanner........... 1-6
Open Link Mode - Single Image Scanner ............. 1-6
Override Locked Image Scanner........................... 1-6
Multiple Image Scanner Operation.............................. 1-7
Image Scanner Name ................................................. 1-7
Changing Image Scanner Name - Serially............ 1-7
Changing Image Scanner Name - via Barcodes... 1-8
Image Scanner Report ................................................ 1-9
Application Work Groups ............................................ 1-9
Application Work Group Selection....................... 1-10
Resetting the Standard Product Default Settings:
Current Application Work Group ............................ 1-11
Resetting the Standard Product Default Settings:
All Application Work Groups ................................... 1-11
Using the Image Scanner with Bluetooth Devices ... 1-12
Changing Bluetooth PIN Code ............................ 1-12
Out-of-Range Alarm .................................................. 1-12
Duration............................................................... 1-12
Alarm Sound Type............................................... 1-13
Data Accumulation Mode .......................................... 1-13
Batch Mode Transmit Delay................................ 1-14
Table of Contents
ii
Beeper and LED Sequences and Their Meaning ......1-14
3820/3820i LED Sequences and Their Meaning .1-15
2020 LED Sequences and Their Meaning...........1-15
Basic Operation of the Cordless System...................1-16
System Conditions...............................................1-17
Communication Between the Cordless System
and the Host ........................................................1-18
Connecting the Base When Powered by Host
(Keyboard Wedge) ..................................................1-18
Reading Techniques..................................................1-20
Resetting the Standard Product Defaults ..................1-20
Plug and Play.............................................................1-21
Keyboard Wedge Connection....................................1-21
Laptop Direct Connect .........................................1-21
RS-232.................................................................1-21
Wand Emulation Plug & Play...............................1-22
IBM 4683 Ports 5B, 9B, and 17 Interface ..................1-22
Connecting the Base with USB..................................1-23
IBM SurePos........................................................1-24
USB PC or Macintosh Keyboard .........................1-24
USB HID ..............................................................1-25
USB Com Port Emulation ....................................1-25
Connecting the Base with Serial Wedge ...................1-26
Chapter 2 - Terminal Interfaces
Terminal ID ..................................................................2-1
Supported Terminals ...................................................2-2
Keyboard Country........................................................2-4
Keyboard Style ............................................................2-6
Keyboard Modifiers......................................................2-7
Andere Handbücher für 2020
2
Dieses Handbuch passt für folgende Modelle
7
Inhaltsverzeichnis
Andere Honeywell Barcode-Lesegerät Handbücher
Honeywell
Honeywell VOYAGER 1202G BF Bedienungsanleitung
Honeywell
Honeywell Eclipse MS5100 Series Bedienungsanleitung
Honeywell
Honeywell MS2421 Bedienungsanleitung
Honeywell
Honeywell Xenon 1910 Bedienungsanleitung
Honeywell
Honeywell VoyagerGS 9590 Series Bedienungsanleitung
Honeywell
Honeywell ms2420 Bedienungsanleitung
Honeywell
Honeywell 4820HDHM Bedienungsanleitung
Honeywell
Honeywell PX4-6IE-CUTR-IG-1 Bedienungsanleitung
Honeywell
Honeywell 4820HDHM Bedienungsanleitung
Honeywell
Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis Bedienungsanleitung
Honeywell
Honeywell Hyperion 1300G Bedienungsanleitung
Honeywell
Honeywell 4850DR Bedienungsanleitung
Honeywell
Honeywell MS9535-5 Bedienungsanleitung
Honeywell
Honeywell OrbitCG MS7180 Bedienungsanleitung
Honeywell
Honeywell XENON 1902G-BF Bedienungsanleitung
Honeywell
Honeywell YJ-HF5000 Bedienungsanleitung
Honeywell
Honeywell IT3800 Bedienungsanleitung
Honeywell
Honeywell VoyagerCG MS9540 Bedienungsanleitung
Honeywell
Honeywell Orbit MS7120 Bedienungsanleitung
Honeywell
Honeywell 3800G14E Bedienungsanleitung
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
