Honeywell QUANTUME IS3480 Bedienungsanleitung
IS3480 QuantumE®
Scan Engine
User’s Guide
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in
specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether any
such changes have been made. The information in this publication does not
represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained
herein: nor for incidental or consequential damages resulting from the furnishing,
performance, or use of this manual.
This document contains propriety information that is protected by copyright.
All rights reserved. No part of this document may be photocopied, reproduced,
or translated into another language without the prior written consent of HII.
© 2004 - 2010 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com
Trademarks
Metrologic, QuantumE, CodeGate, MetroSelect and MetroSet2 are trademarks or
registered trademarks of Metrologic Instruments, Inc. or Honeywell International
Inc.
Microsoft, Windows 95, and Windows are registered trademarks of Microsoft
Corporation.
IBM is a trademark of International Business Machines Corporation.
Checkpoint is a registered trademark of Checkpoint Systems, Inc.
Other product names mentioned in this manual may be trademarks or
registered trademarks of their respective companies and are the property of their
respective owners.
ii
TABLE OF CONTENTS
Introduction
Product Overview ............................................................................................. 1
Scanner and Accessories................................................................................. 2
Maintenance..................................................................................................... 3
Scanner Components....................................................................................... 4
Cable Removal................................................................................................. 4
Caution and Serial Number Labels................................................................... 5
Mounting Specifications ................................................................................... 5
Installation
RS232, RS232 TTL, Light Pen or Laser Emulation .......................................... 6
RS485 .............................................................................................................. 7
Keyboard Wedge.............................................................................................. 8
Stand-Alone Keyboard ..................................................................................... 9
Low Speed USB (Integrated).......................................................................... 10
Notes for Laser Emulation.............................................................................. 11
Scanner Operation
Configurable Primary and Secondary Scan Pattern Modes ........................... 12
Configurable Button Functions ....................................................................... 12
Sweet Spot Mode........................................................................................... 17
Indicators
Audible ....................................................................................................... 18
Visual ......................................................................................................... 19
Failure ........................................................................................................ 20
Depth of Field Specifications
Normal Scan Zone ..................................................................................... 21
Reduced Scan Zone................................................................................... 22
Depth of Field by Bar Code Element Width
Normal Scan Zone ..................................................................................... 23
Reduced Scan Zone................................................................................... 24
iii
TABLE OF CONTENTS
IR Activation Range........................................................................................ 25
Troubleshooting Guide ....................................................................................... 26
Design Specifications ......................................................................................... 29
Applications and Protocols ................................................................................. 31
Configuration Modes .......................................................................................... 32
Upgrading the Firmware..................................................................................... 33
Default Settings - Communication Parameters................................................... 34
Scanner and Cable Terminations ....................................................................... 39
Regulatory Compliance
Safety ............................................................................................................. 44
EMC ............................................................................................................... 45
Limited Warranty ................................................................................................ 47
Patents ............................................................................................................... 49
Index .................................................................................................................. 50
Customer Support .............................................................................................. 52
Technical Assistance...................................................................................... 52
Product Service and Repair............................................................................ 53
1
INTRODUCTION
QuantumE
®is a miniature, omni-directional scanning engine with optional single-
line scanning capability. The self-contained device is fully enclosed eliminating
the need for an external window or custom enclosure. It is designed for use in
OEM equipment such as price lookup systems and kiosks. QuantumEs slim
design makes it ideal for integration and use with flat-screens.
Key Product Features
•Fully Automatic Scanning Operation
•Custom Configurable Scan Pattern
•User-Replaceable Single Cable Interface to Host (PowerLink Compatible)
•Decoding of All Standard 1D and GS1 DataBar™ (RSS) Bar Codes
•Data Editing
•Seven Beeper Tones
•Configurable Depth of Field
•Flash - Upgradeable Firmware
•CodeGate®
•Sunrise 2005 Compliant
SCANNER INTERFACE
IS3480-11 RS485and Full RS232
IS3480-38 RS232 Low Speed USB,
Keyboard Emulation or Serial Emulation
IS3480-41 RS232/Light Pen Emulation
IS3480-47 Keyboard Wedge, Stand-Alone Keyboard and
RS232 Transmit/Receive
IS3480-104 RS232 TTL, Laser Emulation
Applicable for IBM®Host applications.
2
INTRODUCTION
Scanner and Accessories
BASIC KIT COMPONENTS
Part No. Description
IS3480 QuantumEScanner
00-02026 IS3480 Installation and User’s Guide *
00-02407 MetroSelect®Configuration Guide *
*Guides also available for download at www.honeywellaidc.com.
OPTIONAL ACCESSORIES
Part No. Description
AC to DC Power Transformer - Regulated 5.2VDC @ 1A output.
46-00525 90VAC to 255VAC United States, Canada and Japan
46-00526 90VAC to 255VAC Continental European
46-00527 90VAC to 255VAC United Kingdom
46-00528 90VAC to 255VAC Australia
46-00529 90VAC to 255VAC China
46-00530 90VAC to 255VAC India
59-59000-3
(default)
PowerLink cable with built in power jack straight cord, short
strain relief
53-53000-3
(optional)
PowerLink cable with built in power jack coiled cord, long
strain relief
** Contact a customer service representative for additional information on
the MVC cable series and the host connections available.
MVC** Voltage Converter Cable ±12VDC to +5.2VDC
Other items may be ordered for the specific protocol being used. To order additional
items, contact the dealer, distributor or customer service. See page 52 for contact
information.
3
INTRODUCTION
Scanner and Accessories
OPTIONAL ACCESSORIES
Part No. Description
59-59002x-3 Keyboard Wedge PowerLink cable
59-59020x-3 Stand Alone Keyboard PowerLink cable
59-59235x-N-3 Low Speed USB Non-Locking Communication Cable
straight cord, short strain relief
35-35959 Utility Flex Cable
59-59249x-N-3 Communication Cable, Host end Not Terminated straight
cord, short strain relief
REPLACEMENT PARTS
Part No. Description
36-01822x-3 Rubber Utility Seal
Other items may be ordered for the specific protocol being used. To order additional
items, contact the dealer, distributor or customer service. See page 52 for contact
information.
Maintenance
Smudges and dirt on the unit's window can interfere with the unit's performance.
If the window requires cleaning, use only a mild glass cleaner containing no
ammonia. When cleaning the window, spray the cleaner onto a lint free, non-
abrasive cleaning cloth then gently wipe the window clean.
If the unit's case requires cleaning, use a mild cleaning agent that does not
contain strong oxidizing chemicals. Strong cleaning agents may discolor or
damage the unit's exterior.
4
INTRODUCTION
Scanner Components
Figure 1a. Scanner Components
ITEM NO. DESCRIPTION
1 Utility Connector Located Under Rubber Seal
The rubber seal protecting the utility connector should only be
removed if the utility connector is to be used.
2 10-Pin RJ45, Female Socket
3 Blue, White and Yellow LED Indicators
4 Red Output Window (Laser Aperture)
5 Pin Hole for Cable Release
6 Speaker
7 Three M2.5 x 0.45 Threaded Mounting Points
8 Two M2.5 x 0.45 Threaded Mounting Points
9 Button
Cable Removal
1. Locate the small ‘pinhole’ on the side of the
QuantumEnear the cable (item 5 in figure 1a).
2. Bend an ordinary paperclip into the shape shown.
3. Insert the paperclip (or other small metallic pin)
into the ‘pinhole’.
4. There will be a faint ‘click’ when the cable lock is
released. Pull gently on the strain-relief of the
PowerLink cable to remove it from the scanner.
Figure 1b.
5
INTRODUCTION
Caution and Serial Number Labels
Figure 2.
Caution
To maintain compliance with applicable standards, all circuits connected to the
scanner must meet the requirements for SELV (Safety Extra Low Voltage) according
to EN/IEC 60950-1.
To maintain compliance with standard CSA C22.2 No. 60950-1/UL 60950-1 and norm
EN/IEC 60950-1, the power source should meet applicable performance requirements for a
limited power source.
Mounting Specifications
Figure 3.
6
INSTALLATION
RS232, RS232 TTL, Light Pen or Laser Emulation
1. Turn off the host device.
2. Plug the male 10-pin RJ45 end
of the PowerLink cable into the
10-pin socket on the IS3480.
3. Connect the 9-pin female end of the
PowerLink cable to the host device.
Note: Skip to step 6 if receiving
power from the host device.
4. Plug the external power supply into
the power jack on the PowerLink
cable.
Check the AC input
requirements of the power
supply to make sure the
voltage matches the AC
outlet. The outlet must be
located near the equipment
and be easily accessible.
5. Connect AC power to the transformer.
6. Turn on the host device.
When the scanner first receives power, the blue LED will turn on;
the scanner will simultaneously beep once and flash the white LED.
Plugging the scanner into the serial port of the PC does not
guarantee that scanned information will appear at the PC.
A software driver and correct configuration setting are also required
for proper communication to occur.
See page 5.
Figure 4.
Andere Handbücher für QUANTUME IS3480
1
Inhaltsverzeichnis
Andere Honeywell Barcode-Lesegerät Handbücher
Honeywell
Honeywell YJ HF600 Bedienungsanleitung
Honeywell
Honeywell Voyager 9520 Bedienungsanleitung
Honeywell
Honeywell Genesis 7580G Bedienungsanleitung
Honeywell
Honeywell HH1800 Bedienungsanleitung
Honeywell
Honeywell Dolphin 99GX Bedienungsanleitung
Honeywell
Honeywell Vuquest 3310g Bedienungsanleitung
Honeywell
Honeywell 4800i Bedienungsanleitung
Honeywell
Honeywell 1900GHD Bedienungsanleitung
Honeywell
Honeywell XENON 1902G-BF Bedienungsanleitung
Honeywell
Honeywell I-Class Mark II Bedienungsanleitung
Honeywell
Honeywell MS9520 Voyager Bedienungsanleitung
Honeywell
Honeywell Vuquest 3310g Bedienungsanleitung
Honeywell
Honeywell Eclipse MS5100 Series Bedienungsanleitung
Honeywell
Honeywell VOYAGER 1202G BF Bedienungsanleitung
Honeywell
Honeywell Horizon MS7600 Bedienungsanleitung
Honeywell
Honeywell MS2422 Bedienungsanleitung
Honeywell
Honeywell 3800 Linear Series Bedienungsanleitung
Honeywell
Honeywell VoyagerGS MS9590i Bedienungsanleitung
Honeywell
Honeywell HF800 Series Bedienungsanleitung
Honeywell
Honeywell 2020 Bedienungsanleitung
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
