Honeywell CT50-HB Bedienungsanleitung

CT50 HomeBase

Models CT50-HB, CT50-EB

Quick Start Guide

Rev C

3/19

Out of the Box

Make sure that your shipping box contains these items:

• CT50 HomeBase (CT50-HB) or Ethernet HomeBase (CT50-

EB)

• Power supply

•Powercord

• Quick start guide and regulatory compliance sheet

If any of these items are missing or appear damaged, contact

your Customer Account Representative. Keep the original pack-

aging in the event that you need to return the HomeBase or

Ethernet HomeBase for service or if you want to store the char-

ger while not in use..

Connect Power

Use only a UL Listed power supply which has been qualified by

Honeywell with an output rated at 12 VDC and 3 A. The power

supply input rating is 90-264 VAC, 50/60 Hz. The operating

temperature is -20 °C to 50 °C (-4 °F to 122 °F).

Caution: We recommend the use of Honeywell

accessories and power adapters. Use of any

non-Honeywell accessories or power

adapters may cause damage not covered

by the warranty.

Mise en garde : Il est recommandé d'utiliser les

périphériques, les cordons d'alimentation

et les adaptateurs secteur conçus par

Honeywell. L'utilisation de tout

périphérique, cordon d'alimentation ou

adaptateur secteur d'une autre marque est

susceptible de provoquer des dommages

non couverts par la garantie.

Ethernet

(CT50-EB)

USB Host

(CT50-EB)

DC Power

1. Plug the power cord into the power supply.

2. Plug the power supply cable into the power connector on

the back of the HomeBase.

3. Plug the power cord into a standard wall outlet.

Charge the Battery Pack

Insert a battery pack into the HomeBase:

Caution: Make sure that all components are dry

prior to using the computers and batteries

with accessories. Using wet components

may cause damage not covered by the

warranty.

Mise en garde : Assurez-vous que tous les

composants sont secs avant de connecter

les terminaux/batteries à des

périphériques. L'insertion de composants

humides risque de provoquer des

dommages non couverts par la garantie.

Ethernet LED

(CT50-EB)

Battery LED

Status LEDs

The HomeBase has one LED for the battery status. The Ethernet

Homebase has two status LEDs: Ethernet and battery.

LED Status Description

Ethernet Solid white CT50 is communicating with

HomeBase.

Blinking

White

CT50 is communicating with the

Ethernet network.

Off HomeBase not communicating

with Ethernet network or not

connected to power.

Mount the HomeBase

You can mount the HomeBase on a flat, horizontal surface such

as a desktop or workbench with an optional DIN rail.

Mounting hardware required:

•DINrail

• 3/16-inch diameter x 5.8-inch long pan head screw

• 1/2-inch OD x 7/32-inch ID x 3/64-inch thick washer

• 3/16-inch diameter nut

1. Slide the DIN rail into the slot on the bottom of the Home-

Base.

2. Secure the DIN rail to the flat surface with the hardware.

Battery Solid green The battery is connected to

external power and is fully

charged.

Solid amber The battery is connected to

external power and is charging.

Blinking red There is a battery charging fault,

such as over-temperature.

LED Status Description

Agency Information

USA

FCC Part 15 Subpart B Class B

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for

a Class B digital device pursuant to part 15 of the FCC Rules. These lim-

its are designed to provide reasonable protection against harmful inter-

ference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

UL and C-UL Statement

UL and C-UL listed: UL 60950-1, Second

Edition and CSA C22.2 No.60950-1-07, Sec-

ond Edition.

Norme UL et C-UL

Homologué UL et C-UL : UL 60950-1,

seconde édition et CSA C22.2 No.60950-

1-07, seconde édition. If the following label is attached to your product, the product meets Korean agency approval for Class B equipment:󼓣󾖴󺮟󺮟󻀃󾖴󺥯󼖄󼐘 (B󺭸 ) 󼕳󼓿󽁻󼕰󽋘󺮟󺮟󻗋󻺋󾖴󼙫󻗋󾖴󺥯󼖄󼌿󻺋󾖴󻸛󼐘󽋇󻀃󾖴󺧲󼒳󾖴󻠘󼕰󼒫󻗋󾖴󽋇󻟟 , 󻠗󻉏󾖴󼜯󼍜󼌿󻺋󾖴󻸛󼐘󽋏󾖴󻾇󾖴󼓷󼀤󻀷󻁓 . RCM Mark

Complies with

ACMA regulatory

arrangements.

Customs Union

Approval Mexico

Conforms to NOM-019

Cumple con NOM-019

Está em conformidade com a NOM-019

• Consult the dealer or an experienced radio or television technician for

help.

If necessary, the user should consult the dealer or an experienced radio/

television technician for additional suggestions. The user may find the

following booklet helpful: “Something About Interference.” This is avail-

able at FCC local regional offices. Honeywell is not responsible for any

radio or television interference caused by unauthorized modifications of

this equipment or the substitution or attachment of connecting cables

and equipment other than those specified by Honeywell.

The correction is the responsibility of the user.

Use only shielded data cables with this system. This unit has been

tested with cables less than 3 meters. Cables greater than 3 meters may

not meet class B performance.

Caution: Any changes or modifications made to this equipment not

expressly approved by Honeywell may void the FCC authorization to

operate this equipment.

Canada

Industry Canada ICES-003

This Class B digital apparatus complies with Canadian ICES-003. Oper-

ation is subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

Conformité à la règlementation canadienne

Cet appareil numérique de la Classe B est conforme à la norme NMB-

003 du Canada. Son fonctionnement est assujetti aux conditions suiva-

ntes :

1. Cet appareil ne doit pas causer de brouillage préjudiciable.

2. Cet appareil doit pouvoir accepter tout brouillage reçu, y compris le

brouillage pouvant causer un fonctionnement indésirable.

Europe

The CE marking indicates compliance to 2004/108/EC EMC

Directive with Standards EN55022 CLASS B, EN55024,

EN61000-3-2, EN61000-3-3. 2011/65/EU ROHS (Recast). In

addition, complies to 2006/95/EC Low Voltage Directive, when

shipped with recommended power supply.

Honeywell International Inc. shall not be liable for use of our product

with equipment (i.e., power supplies, personal computers, etc.) that is

not CE marked and does not comply with the Low Voltage Directive.

Use only shielded data cables with this system. This unit has been

tested with cables less than 3 meters. Cables greater than 3 meters may

not meet class B performance.

Certified to CB Scheme IEC 60950-1, Second Edition.

Refer to www.honeywellaidc.com/environmental for the RoHS / REACH

/ WEEE information.

La marquage CE indique que cet appareil est conforme à la

Directive CEM 2004/108/CE et avec les normes EN55022

CLASSE B, EN55024, EN61000-3-2, EN61000-3-3. 2011/65/

EU ROHS (Recast). De plus, il est conforme à la Directive sur les

basses tensions 2006/95/EC, lorsqu’il est fourni avec le bloc

d’alimentation recommandé.

Honeywell ne sera pas tenu responsable de l’utilisation de ses produit

avec de l’équipement (c’est-à-dire, blocs d’alimentation, ordinateurs

personnels, etc.) qui ne porte pas la marque CE et n’est pas conforme à

la Directive sur les basses tensions.

Utiliser uniquement des câbles de données blindés avec ce système.

L’appareil a été testé avec des câbles de moins de 3 mètres. Les câbles

de longueur supérieure à 3 mètres peuvent ne pas satisfaire à la perfor-

mance de la classe B.

Certifié CB CEI 60950-1, deuxième édition.

Reportez-vous à la page www.honeywellaidc.com/environmental pour

obtenir des renseignements concernant les directives RoHS/REACH/

WEEE.

La marquage CE apposée sur ce dispositif atteste qu’il est con-

forme à la Directive CEM 2004/108/CE et aux normes

EN55022 CLASSE B, EN55024, EN61000-3-2, EN61000-3-3.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Akkuladegerät Handbücher

Honeywell

Honeywell NSEK Bedienungsanleitung

Honeywell

Honeywell Dolphin 9500 Bedienungsanleitung

Honeywell

Honeywell MB12-BAT-SCN02 Bedienungsanleitung

Honeywell

Honeywell Impact Series Gebrauchsanweisung

Honeywell

Honeywell 010690.01 Gebrauchsanweisung

Honeywell

Honeywell Dolphin CT40 Bedienungsanleitung

Honeywell

Honeywell PEHA 1602/2 Handbuch

Honeywell

Honeywell 057530.10 Gebrauchsanweisung

Honeywell

Honeywell Captuvo SL22 Bedienungsanleitung

Honeywell

Honeywell CX80 Quad Battery Charger Bedienungsanleitung

Honeywell

Honeywell RP2B Bedienungsanleitung

Honeywell

Honeywell MX9 Bedienungsanleitung

Honeywell

Honeywell HomeBase D7900 Bedienungsanleitung

Honeywell

Honeywell 8670 Bedienungsanleitung

Honeywell

Honeywell HomeBase CX80 Bedienungsanleitung

Honeywell

Honeywell MB4-BAT-SCN02 Bedienungsanleitung

Honeywell

Honeywell Dolphin 7900 Bedienungsanleitung

Honeywell

Honeywell QuadCharger Bedienungsanleitung

Honeywell

Honeywell CT50-QBC Bedienungsanleitung

Honeywell

Honeywell Multi-Bay Battery Charger Bedienungsanleitung

Honeywell

Honeywell 70e-BTSC Bedienungsanleitung

Honeywell

Honeywell Intermec AC18 Bedienungsanleitung

Honeywell

Honeywell 012168 Gebrauchsanweisung

Honeywell

Honeywell M5-C01 Series Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung