Honeywell IFP-300 Technische Daten

Model IFP-300 Basic Operating Instructions

These Instructions must be framed and displayed next to the IFP-300 panel in accordance with NFPA 7 fire code for

Local Protected Fire Alarm Systems. Test the system in accordance to NFPA 7 .

Operation

Task to Per

form

Silence Alarms and

Troubles

Press

SILENCE

then enter a code if prompted. Silence LED will light.

Reset Alarms

Press

RESET

then enter a code if prompted.

View Alarms,

Supervisory, and

Troubles

For each type of condition press the Up or Down button associated for Alarms,

Supervisory, or Troubles.

View status of Point

Press

ENTER

to access Main

Menu.

Press to select Point Functions.

Then press to select Point Status.

Select the module the device is located on by using the Up or Down button. Then

press ENTER.

Enter the point number.

Conduct a Fire Drill

Call service company

May be disabled

May not be allowed by

AHJ in your area.

Press

ENTER

to access Main

Menu.

Then Press 1 to select System Tests.

Press 1 to select Fire Drill.

Press ENTER to start the fire drill.

Press ENTER to end the fire drill.

TROUBLE

FIRE: ALARM SUPERVISORY

CO: ALARM SUPERVISORY

SYSTEM: TROUBLE

Check Detector

Sensitivity

Press

ENTER

to access Main

Menu.

Press for Point Status.

From the list that displays, select the SLC module where the point you want to view is

located.

The fourth line of the display shows the sensitivity status. “NORMAL” means the

detector is in compliance with NFPA 7 .

“CAL MAINT” means the detector is in compliance with NFPA 7 but maintenance should

be performed soon.

“CAL TRBLE” means the detector is not in compliance with NFPA 7 .

Set Time and Date

Press

ENTER

to access Main

Menu.

Press 4 to select Set Time & Date. Enter a code if prompted

Make changes in the fields on the screen as necessary.

When the time and date are correct, press ENTER.

Enable / Disable a Point

Press

ENTER

to access Main

Menu.

Press to select Point Functions.

Press 1 for Disable / Enable Pt

Press 7 for Disable / Enable Pt.

Use the Up or Down button to move through the list. Then press ENTER to select the

module where the point you want to disable/enable is located

Enter the point or circuit number that you want to disable/enable.

Press the right arrow key to toggle between NORMAL (enable) or DISABLE.

View Event History

From the Program Menu.

Press 3 to select Event History.

Press the Up or Downbutton to view events in the history buffer.

For Service Call:

(800) 639- 5 1

Andere Honeywell Bedienfeld Handbücher

Honeywell

Honeywell Fire-Lite Alarms MS-9200 Bedienungsanleitung

Honeywell

Honeywell Excel 5000 System Series Bedienungsanleitung

Honeywell

Honeywell RS-232 Bedienungsanleitung

Honeywell

Honeywell IFP-2100ECS Technische Daten

Honeywell

Honeywell Galaxy Flex Benutzerhandbuch

Honeywell

Honeywell Domonial CMI Series Benutzerhandbuch

Honeywell

Honeywell NOTIFIER RP1r Bedienungsanleitung

Honeywell

Honeywell NOTIFIER INSPIRE E10 Schulungshandbuch

Honeywell

Honeywell Notifier NFS-320/E/C Bedienungsanleitung

Honeywell

Honeywell nfs2-3030 Betriebsanleitung

Honeywell

Honeywell Fire-Lite Alarms MRP-2001 Bedienungsanleitung

Honeywell

Honeywell TrolaTemp MABS EZ-2 Bedienungsanleitung

Honeywell

Honeywell Pro-Watch 7000 Bedienungsanleitung

Honeywell

Honeywell TrueZONE HZ432 Bedienungsanleitung

Honeywell

Honeywell Notifier AFP-100 Bedienungsanleitung

Honeywell

Honeywell Gamewell-FCI GWF-7075 Bedienungsanleitung

Honeywell

Honeywell ENVIRAZONE PANEL W8835 Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms ES-50X Bedienungsanleitung

Honeywell

Honeywell TrolATemp TZ-3 TotalZone Bedienungsanleitung

Honeywell

Honeywell 13270-01LB Bedienungsanleitung

Honeywell

Honeywell Notifier NFS2-640/E Betriebsanleitung

Honeywell

Honeywell 5110XM Bedienungsanleitung

Honeywell

Honeywell W-MMF Bedienungsanleitung

Honeywell

Honeywell Accenta Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

Trane

Trane ComfortLink II XL950 Control Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten