Honeywell Notifier ID3000 Series Bedienungsanleitung

fire panel

configuration tool

manual

ID2000

ID3000/

997-291 Version 3.05b November 2010

ID3000/ID2000FirePanelConfigurationToolManual

Contents

ii 997-291,Version 3.05

November2010

Quick Contents Reference by

Section

6 Networking

5 Time-of-Day

Programs

4 Control Matrix (CBE)

2 Panel Settings

3 Loop Devices

1 Introduction

CLICK HERE

FOR FULL

CONTENTS LIST

ID3000/ID2000FirePanelConfigurationToolManual

Contents

iii 997-291, Version3.05

November2010

Contents

1 Introduction 1-1

1.1 PC Specification 1-2

1.2 Installation 1-2

1.3 Starting the Tool 1-3

1.3.1 AuthenticationOption 1-3

1.4 Connecting a PC to the Panel 1-4

1.5 Tool Overview and Menus 1-5

1.5.1 ToolLanguage Setting 1-5

1.5.2 ToolWindow 1-5

1.5.3 FileMenu 1-6

1.5.4 PanelMenu 1-7

1.5.5 RepeaterMenu 1-9

1.5.6 ViewMenu 1-12

1.5.7 EditMenu 1-12

1.5.8 CommunicationsMenu 1-14

1.5.9 SystemParameters Menu 1-17

1.5.10 ToolsMenu 1-19

1.5.11 External SystemsMenu 1-21

1.5.12 HelpMenu 1-22

1.5.13 Toolbar Options 1-22

1.5.14 LoopDisplay 1-23

Page

ID3000/ID2000FirePanelConfigurationToolManual

Contents

iv 997-291,Version 3.05

November2010

2 Panel Settings Configuration 2-1

2.1 Specification Tab 2-1

2.2 Loop Setting Tab 2-2

2.3 Port/Printer Options Tab 2-6

2.4 Pulse Options Tab 2-8

2.5 ÜE Configuration Tab 2-10

2.6 Remote Fire Outputs Tab 2-12

2.7 Tests Tab 2-14

2.8 Disablements Tab 2-15

2.9 Day/Night Mode Tab 2-18

2.10 Other Options Tab 2-20

2.11 Extinguishing System Tab 2-23

2.12 Alarm Coincidence Tab 2-24

2.13 VdS Network Options 2-25

3 Loop Devices Configuration 3-1

3.1 Select a Device 3-1

3.2 Edit Device 3-5

3.2.1 Sensors 3-5

3.2.2 Modules 3-16

3.2.3 DefineSounder Tone Slots 3-21

4 Control Matrix Configuration 4-1

4.1 Introduction 4-1

4.1.1 EN54Requirements 4-1

ID3000/ID2000FirePanelConfigurationToolManual

Contents

v 997-291,Version3.05

November2010

4.1.2 InputEvent Statement 4-2

4.1.3 OutputEvent Statement 4-5

4.1.4 ExtinguishingSystem Function 4-8

4.1.5 LogicOperations with Transfer

Flags 4-12

4.2 Review/Edit Control Matrix

Entries 4-16

4.2.1 ReviewEntries 4-16

4.2.2 Amend/Create/DeleteEntry 4-16

4.2.3 PrintMenu 4-17

4.2.4 ThermalAlarm Verification

Delay 4-17

4.3 Defining a Control Matrix Rule 4-18

4.3.1 InputEvent 4-18

4.3.2 OutputEvent 4-25

5 Time-of-day Configuration 5-1

5.1 Introduction 5-1

5.2 Manual Override 5-2

5.3 Editing Procedure 5-3

6 Network Configuration 6-1

6.1 Introduction 6-1

6.2 Master/Slave Network 6-2

6.2.1 Introduction 6-2

ID3000/ID2000FirePanelConfigurationToolManual

Contents

vi 997-291,Version 3.05

November2010

6.2.2 Procedure 6-4

6.3 ID2net Peer-to-Peer Network 6-8

6.3.1 Introduction 6-8

6.3.2 Procedure 6-11

6.3.3 SectorConfiguration 6-13

Appendix 1 Historic & Data Log Tool

Appendix 2 Database Query Utility

Appendix 3Additional Logic Example

ID3000/ID2000FirePanelConfigurationToolManual

Introduction

1 - 1 997-291,Version3.05

November2010

1 Introduction

The ID3000/ID2000 Fire Panel Configuration

Tool (PN: 020-558) allows the userto:

a. Configurepanel settings, loop devices,the

ControlMatrix and anetwork by usinga PC

remotefrom the fire panel.

b. Receivethe existing configuration from the

fire panel to the PC, and send a new or

edited configuration from the PC to the fire

panel.

c. Configure an IDR-6Arepeater.

ThroughoutthismanualtheID3000/ID2000Fire

Panel Configuration Tool is referred to as ‘the

Tool’ and the fire panel as ‘the panel’.

Be aware that...

Thismanualisnotintendedtobeafiredetection

system design guide and should only be used

by (or under the supervision of) a qualified

systemdesign engineer.

It is assumed that the system has been

designedin accordance with the requirements

of EN54 Part 14, BS 5839 Part 1:1988 and

otherlocalcodesofpracticethatareapplicable.

Some features of the panel may, if used

inappropriately,contravenetherequirementsof

EN54. This manual includes warnings (see

exampleopposite)wherethereisthepossibility

ofsuch an occurrence.

EN54-2:13.7

Maximumof512

Sensorsand/orMCPs

perpanelunless ELIBs

areused.

Cross-references(inbold

type)inthismanual

includelinks.For example,

click on (see Section 4)

togoto thatSection.

ID3000/ID2000FirePanelConfigurationToolManual

Introduction

1 - 2 997-291,Version3.05

November2010

1.1 PC Specification

The minimum specification for the PC is:

a. PentiumClass Processor.

b. Windows XP with service pack 2 with

128MBmemory.

c. 120MB disk space available.

d. CD-ROM.

e. SVGA 1024 x 768 colour display.

Note: To ensure that the Tool’s windows are

all displayed correctly, the PC’s Control

Panel/Display/Appearancetab/Scheme

option must be left at its default setting.

1.2 Installation

To install the Tool:

1TheCD should auto-run (if it does not, click

on‘Setup.exe’).

2Follow the on-screen prompts to complete

the process.

ID3000/ID2000FirePanelConfigurationToolManual

Introduction

1 - 3 997-291,Version3.05

November2010

1.3 Starting the Tool

Doone of:

a. Double-click on the Tool icon.

b. Select ‘Programs/Notifier/ID Series

ConfigurationTool’fromthePC’s‘Start’menu.

The Tool uses standard windows methods of

opening, closing, selecting etc.

1.3.1 Authentication Option

IftheToolis authenticated, upon firstcommuni-

cation with any panel using panel software

version4.21eoraboveanauthenticationcode

is sent to the panel. Subsequently, that panel

can only communicate with an authenticated

version of the Tool. If panel authentication is

not required, do not authenticate the Tool. To

authenticatetheTool:

1Note the customer code and send it to your

company’sauthorisedrepresentative.Onlythe

authorisedrepresentativemayapplyforthe

authenticationlicencekey.Thecustomercode

may be submitted (together with the other

requesteddata)usinganelectronicAuthentication

passcoderequest,availablebye-mailfrom:

[email protected]

2Notifier will e-mail the electronic passcode

request form back yo your company’s

authorised representative with the licence

key (valid for a specific PC only).

IftheToolislaterinstalledonadifferentphysical

driveor partition, orif a licence expiry warning

is displayed (given at 30 and 7 days), the

registrationprocedure mustbe repeated.

See ‘Help’ menu ‘About’ option for the current

authentication status of theTool.

ID3000/ID2000FirePanelConfigurationToolManual

Introduction

1 - 4 997-291,Version3.05

November2010

1.4 Connecting a PC to the Panel

Useasuitabledatacommunicationscable.The

panel requires a male RS232 9-way D-type

connectionfrom thecable.Toconnect the PC:

Caution: Direct connection of a PC to the panel’s

RS232 connector P1 will cause an earth

fault with potential damage to the PC.

Either use an isolated RS232 link or

(temporarily) disable the fault monitoring

circuit (steps 1 and 2 below). If an earth

fault already exists (LED next to link JP1

illuminated yellow), DO NOT connect

additional equipment likely to cause earth

faults as damage may result (i.e. inhibiting

the monitoring will not protect the

equipment).

1Disablethe earth fault monitoring circuit by

removing the jumper link on JP1 (A) at the

topright-hand corner ofthe Base PCB.The

PCB is marked ‘EFD’ above the link.

2Wait for at least one minute after disabling

thefaultmonitoringcircuit,thenusethedata

communications cable to connect the PC

tothe RS232 connectorP1 (B)on the Base

PCB.

3When the data transfer is complete (either

from panel to PC or PC to panel, see

Section 1.5.7),disconnect the PCfrom the

panel.

4Enable the earth fault monitoring circuit by

replacingthejumperonJP1.Tocomplywith

EN54-2: 8.2.4c,earthfaultmonitoringMUST

beenabled.

EN54-2:8.2.4c

EarthFaultMonitoring

isrequired.

Incorrectconnectionscould

resultin damagetothe

commsportofthePC.The

panel’sRS232connector

P1isNOTanisolatedport.

Andere Handbücher für Notifier ID3000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Bedienfeld Handbücher

Honeywell

Honeywell NOTIFIER AM1000 Betriebsanleitung

Honeywell

Honeywell NOTIFIER ID62 Merkblatt

Honeywell

Honeywell Notifier RP-2001 Bedienungsanleitung

Honeywell

Honeywell Silent Knight RA-2000 Bedienungsanleitung

Honeywell

Honeywell ADEMCO VISTA SERIES Installationsanleitung

Honeywell

Honeywell 6820 Bedienungsanleitung

Honeywell

Honeywell 013080 Gebrauchsanweisung

Honeywell

Honeywell PL-1000 Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms MS-9600LS Bedienungsanleitung

Honeywell

Honeywell Fire-lite ECC-LOC Bedienungsanleitung

Honeywell

Honeywell DX Connexion Series Bedienungsanleitung

Honeywell

Honeywell GALAXY 16103 Bedienungsanleitung

Honeywell

Honeywell NOTIFIER ID2000 Series Leitfaden

Honeywell

Honeywell Symphony Bedienungsanleitung

Honeywell

Honeywell NOTIFIER NCA-2 Bedienungsanleitung

Honeywell

Honeywell Domonial CMI Series Benutzerhandbuch

Honeywell

Honeywell Galaxy Flex Benutzerhandbuch

Honeywell

Honeywell Notifier NFS-320 Bedienungsanleitung

Honeywell

Honeywell VARIODYN D1 Comprio Technisches Handbuch

Honeywell

Honeywell TotalZone TZ-4 Bedienungsanleitung

Honeywell

Honeywell TrueZONE HZ432K/U Bedienungsanleitung

Honeywell

Honeywell TrueZONE HZ311 Bedienungsanleitung

Honeywell

Honeywell IQ8Control C Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms ES-200X Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

Trane

Trane ComfortLink II XL950 Control Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten