Honeywell Experion LX 8 series Bedienungsanleitung

Experion LX

Series 8 Cabinet Installation Instruction

EXDOC-X290-en-500A

April 2017

Release 500

Document Release Issue Date

EXDOC-X290-en-500A 500 0 April 2017

Disclaimer

This document contains Honeywell proprietary information. Information contained herein is to be used solely

for the purpose submitted, and no part of this document or its contents shall be reproduced, published, or

disclosed to a third party without the express permission of Honeywell International Sàrl.

While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied

warranties of merchantability and fitness for a purpose and makes no express warranties except as may be stated

in its written agreement with and for its customer.

In no event is Honeywell liable to anyone for any direct, special, or consequential damages. The information

and specifications in this document are subject to change without notice.

2www.honeywell.com

Contents

1 About this document ............................................................................................................................. 5

2 Overview of CE Compliance .................................................................................................................. 7

2.1 Related products and modules ............................................................................................................................ 8

2.2 Compliance statement and standards used ....................................................................................................... 10

2.3 Reference to original tested configuration (in cabinet) .................................................................................... 11

3 Mounting and segregation of wiring .................................................................................................. 13

3.1 Cabling and wiring ........................................................................................................................................... 14

3.2 Mounting limitations within a cabinet .............................................................................................................. 16

4 Bonding and grounding ....................................................................................................................... 17

4.1 Cabinet safety ground connections ................................................................................................................... 18

4.2 Power supply grounding considerations ........................................................................................................... 20

5 Power supply selection and distribution ........................................................................................... 21

5.1 Selecting the Power System .............................................................................................................................. 22

5.2 Power Distribution System ............................................................................................................................... 23

6 CE Limitations ...................................................................................................................................... 25

6.1 Operation environment and shielded wiring ..................................................................................................... 26

6.2 ESD issues ........................................................................................................................................................ 27

6.3 Transient protection required ............................................................................................................................ 28

7 Maintenance .......................................................................................................................................... 29

7.1 C300 controller module and IOTA replacement ............................................................................................... 30

7.2 PGM Replacement ............................................................................................................................................ 32

7.3 Series 8 IOTA and I/O module Replacement ................................................................................................... 34

8 Declaration of conformity .................................................................................................................... 37

9 Conclusions .......................................................................................................................................... 41

9.1 Conclusions ....................................................................................................................................................... 42

10 Notices ................................................................................................................................................ 43

CONTENTS

4www.honeywell.com

1 About this document

This document describes how to install and configure the Series 8 cabinet and other important instructions.

Revision History

Revision Date Description

A April 2017 Initial release of the document

1 ABOUT THIS DOCUMENT

6www.honeywell.com

2 Overview of CE Compliance

Related topics

“Related products and modules” on page 8

“Compliance statement and standards used” on page 10

“Reference to original tested configuration (in cabinet)” on page 11

2.1 Related products and modules

Products and modules

Model number Description

8C-PCNT02 C300 Control Processor, coated

8U-PCNT02 C300 Control Processor, uncoated

8C-PAIHA1 HART Analog input module, coated

8U-PAIHA1 HART Analog input module, uncoated

8C-PAINA1 Analog input module, coated

8U-PAINA1 Analog input module, uncoated

8C-PAOHA1 HART Analog output module, coated

8U-PAOHA1 HART Analog output module, uncoated

8C-PAONA1 Analog output module, coated

8U-PAONA1 Analog output module, uncoated

8C-PDILA1 Digital input module, coated

8U-PDILA1 Digital input module, uncoated

8C-PDISA1 Digital input Sequence of Events module,

coated

8U-PDISA1 Digital input Sequence of Events module,

uncoated

8C-PDIPA1 Digital input Pulse Accumulation module,

coated

8U-PDIPA1 Digital input Pulse Accumulation module,

uncoated

8C-PDODA1 Digital output module, coated

8U-PDODA1 Digital output module, uncoated

8C-PAIMA1 TC/RTD input module, coated

8U-PAIMA1 TC/RTD input module, uncoated

8C-IP0102 PROFIBUS Gateway module, coated

8U-IP0102 PROFIBUS Gateway module, uncoated

8C-SHEDA1 Header board, coated

8U-SHEDA1 Header board, uncoated

8C-TCNTA1 C300 Controller IOTA, coated

8U-TCNTA1 C300 Controller IOTA, uncoated

8C-TAIXA1 Analog Input IOTA, coated

8U-TAIXA1 Analog Input IOTA, uncoated

8C-TAIXB1 Analog Input redundant IOTA, coated

8U-TAIXB1 Analog Input redundant IOTA, uncoated

8C-TAOXA1 Analog Output IOTA, coated

8U-TAOXA1 Analog Output IOTA, uncoated

8C-TAOXB1 Analog Output redundant IOTA, coated

2 OVERVIEW OF CE COMPLIANCE

8www.honeywell.com

Model number Description

8U-TAOXB1 Analog Output redundant IOTA, uncoated

8C-TDILA1 Digital Input IOTA, coated

8U-TDILA1 Digital Input IOTA, uncoated

8C-TDILB1 Digital Input redundant IOTA, coated

8U-TDILB1 Digital Input redundant IOTA, uncoated

8C-TDODA1 Digital Output IOTA, coated

8U-TDODA1 Digital Output IOTA, uncoated

8C-TDODB1 Digital Output redundant IOTA, coated

8U-TDODB1 Digital Output redundant IOTA, uncoated

8C-TAIMA1 TC/RTD IOTA, coated

8U-TAIMA1 TC/RTD IOTA, uncoated

8C-TPOXA1 PROFIBUS GATEWAY IOTA, coated

8U-TPOXA1 PROFIBUS GATEWAY IOTA, uncoated

51202971-112 Combo IOLINK cable

CPS20.241 (PULS) AC/DC power supply module

TRIO-PS/1AC/24DC/20 (Phoenix) AC/DC power supply module

SDR-480P-24 (MEAN WELL) AC/DC power supply module

2 OVERVIEW OF CE COMPLIANCE

2.2 Compliance statement and standards used

The models specified in the Related Products section conform to the following directives:

• 2004/108/EC Electromagnetic Compatibility (EMC) Directive

• 2006/95/EC Low Voltage (LVD) Directive

The following standards are used for an LVD directive:

Standard Number Standard Name

EN 61010-1:2010 Safety requirements for electrical equipment for

measurement, control, and laboratory use. Part One consists

of general requirements

The following standards are used for an EMC directive:

Standard Number Standard Name

EN 61326-1:2006 Electrical equipment for measurement, control and

laboratory use. EMC requirements are Part One of general

requirements

2 OVERVIEW OF CE COMPLIANCE

10 www.honeywell.com

Inhaltsverzeichnis

Andere Honeywell Steuerungssystem Handbücher

Honeywell

Honeywell ACC 50 Bedienungsanleitung

Honeywell

Honeywell 5704 Bedienungsanleitung

Honeywell

Honeywell Farenhyt Series Betriebsanleitung

Honeywell

Honeywell RP908A Series Montageanleitung

Honeywell

Honeywell 900CS10-00 Bedienungsanleitung

Honeywell

Honeywell W180 Bedienungsanleitung

Honeywell

Honeywell Tradeline H1008D Bedienungsanleitung

Honeywell

Honeywell VR8304 Bedienungsanleitung

Honeywell

Honeywell NOTIFIER ACS Series Bedienungsanleitung

Honeywell

Honeywell BCS 3600 Bedienungsanleitung

Honeywell

Honeywell touchpoint Pro Bedienungsanleitung

Honeywell

Honeywell W7620 Bedienungsanleitung

Honeywell

Honeywell UMC800 Bedienungsanleitung

Honeywell

Honeywell C7400 Bedienungsanleitung

Honeywell

Honeywell SILENT KNIGHT SK-Zone-6 Bedienungsanleitung

Honeywell

Honeywell VR8404 Bedienungsanleitung

Honeywell

Honeywell MCBA14C Service-Handbuch

Honeywell

Honeywell ACC 50 Bedienungsanleitung

Honeywell

Honeywell Excel 500 Bedienungsanleitung

Honeywell

Honeywell VR8205 Bedienungsanleitung

Honeywell

Honeywell Smile Room Connect SRC-10 Bedienungsanleitung

Honeywell

Honeywell Experion PKS Bedienungsanleitung

Honeywell

Honeywell W7080A Bedienungsanleitung

Honeywell

Honeywell ComfortPoint Open Installations- und Betriebshandbuch

Beliebte Steuerungssystem Handbücher anderer Marken

Pentair Pool Products

Pentair Pool Products Compool Bedienungsanleitung

ComfortNET

ComfortNET CTK04 Bedienungsanleitung

CAME

CAME G3000 Bedienungsanleitung

Idemia

Idemia MorphoAccess VP MD Bedienungsanleitung

Axis

Axis P1445-LE-3 Bedienungsanleitung

HEIDENHAIN

HEIDENHAIN TNC 150 B Bedienungsanleitung

CNC-Step

CNC-Step High-Z T-Series Bedienungsanleitung

Doosan

Doosan DVF Series Bedienungsanleitung

Cypress

Cypress HHR-3160 Bedienungsanleitung

CAME

CAME GLT40AOS Bedienungsanleitung

Zonex

Zonex GEN II -VVT Benutzerhandbuch

Altronics

Altronics K 9650 Bedienungsanleitung

micro-trak

micro-trak RoadMaster Bedienungsanleitung

micro-trak

micro-trak Calc-An-Acre II Bedienungsanleitung

EMKO

EMKO TRANS-SYNCRO Bedienungsanleitung

Dover

Dover TWG GC ELEMENT II Programmierhandbuch

Engcon

Engcon DC3 Bedienungsanleitung

Deligreen

Deligreen BI51 Bedienungsanleitung