Honeywell ML200 Series Bedienungsanleitung

ML200 Installation and Commissioning Guide

EPDOC-X366-en-515A

November2019

Disclaimer

This document contains Honeywell proprietary information. Information contained herein is to be used

solely for the purpose submitted, and no part of this document or its contents shall be reproduced,

published, or disclosed to a third party without the express permission of Honeywell International Sàrl.

While this information is presented in good faith and believed to be accurate, Honeywell disclaims the

implied warranties of merchantability and fitness for a purpose and makes no express warranties

except as may be stated in its written agreement with and for its customer.

In no event is Honeywell liable to anyone for any direct, special, or consequential damages. The

information and specifications in this document are subject to change without notice.

- ii -

Contents i

Chapter 1 - Masterlogic components 2

1.1 Types of CPUs 2

1.2 Types of power supply 2

1.3 Types of modules 5

1.4 Types of base 8

1.5 Types of cables 14

Chapter 2 - Calculating the power supply for components 17

2.1 Power module specifications 17

2.2 Selecting the power supply 19

Chapter 3 - Plan and Install MLPLC 23

3.1 Plan for Engineering Station 23

3.1.1 Platform requirements 23

3.1.2 Prerequisites for Installation 23

3.1.3 Grounding requirements 27

3.1.4 Precautions for installing/handling the PLC modules 28

3.2 Mounting Chassis 29

3.3 Achieving the topology 33

3.4 Turn on and start up 42

Chapter 4 - Troubleshooting 51

4.1 4.1 Overview 51

4.2 Basic troubleshooting procedure 51

4.3 Cases and remedies for failures 51

- i -

MASTERLOGIC COMPONENTS

1.1 Types of CPUs

The following are the types of CPUs of the MasterLogic-200 PLC system.

lNon redundant PLCs

l2MLI-CPUU

l2MLI-CPUH

l2MLI-CPUS

l2MLI-CPUS/P

lRedundant PLC

l2MLR-CPUH/T

l2MLR-CPUH/F

The following naming conventions are used across the document.

l2MLI-CPUU, 2MLI-CPUH, and 2MLI-CPUS are represented as ML200-IEC.

l2MLR-CPUH/T and 2MLR-CPUH/F are represented as ML200R.

1.2 Types of power supply

The different types of voltages supported by ML200-IEC and ML200R are as follows:

lAC 110 V

lAC 220 V

lDC 24V

Power supplies for ML200-IEC

The following table lists the types of power modules for ML200-IEC.

Table 1: Power modules for ML200-IEC

- 2 -

CHAPTER

Model Number Specification

2MLP-ACF1 Free Voltage (AC 110V,220V)/DC5V, 3A, DC24V,0.6A

2MLP-ACF2 Free Voltage(AC 110V,220V)/DC5V, 6A

2MLP-AC23 AC 220V/DC 5V, 8.5A

2MLP-DC42 DC 24V/DC 5V

Table 2: Power modules for 2MLI CPUS/P

Model Number Specification

2MLR-AC12 Redundant power AC 110V, 5.5A

2MLR-AC22 Redundant power AC 220V, 5.5A

2MLR-AC13 Redundant power AC 110V, 8.5A

2MLR-AC23 Redundant power AC 220V, 8.5A

2MLR-DC42 Redundant power DC 24V, 7.5A

The specifications of the power modules for 2MLI CPUS/P and ML200R are the same. For more details,

refer to Table 5: Specifications of the power modules for ML200R .

The following table lists the specifications of the power modules for ML200-IEC.

Table 3: Specifications of the power modules for ML200-IEC

Items 2MLP-

ACF1

2MLP-

ACF2 2MLP-AC23 2MLP-DC42

Input Rated input voltage AC 100V – AC 240V AC 200V –

AC 240V

DC 24V

Input voltage range AC 85V ~ AC 264V AC 170V ~

AC 264V

Input frequency 50 / 60 Hz (47 ~ 63 Hz) -

Inrush current 20 A peak or less 80A peak or less

Efficiency 65% or more 60% or more

Input fuse Built-in (user no change), UL standard (Slow Blow

Type)

Allowable

momentary

shutdown

Within 20ms

- 3 -

Chapter 1 - Masterlogic components

Items 2MLP-

ACF1

2MLP-

ACF2 2MLP-AC23 2MLP-DC42

Output1 Output voltage DC 5V (±2%) DC5V (±2%)

Output current 3.0A 6.0A 8.5A 6.0A

Over current protect 3.2A or

6.6A or

9.0A or

6.6A or more

Over voltage protect 5.5V ~ 6.5V

Output2 Output voltage DC 24V

(±10%)

- -

Output current 0.6A

Over current protect 0.7A or

Over voltage protect None

Relay

Output

Application RUN contact (Refer to the section 8.3)

Rated switching

voltage or current

DC 24V, 0.5A

Minimum

switching load

DC 5V,1 mA

Response time OFF→ON/ ON→OFF: 10 ms or less/12 ms or less

Life Mechanical: More than 20,000,000 times

Electrical: More than 100,000 times at rated switching

voltage/current

RUN signal output Relay output, Rating: DC24V, 0.5A

Voltage indicator Output voltage normal, LED ON

Cable specification 0.75 ~ 2mm2

Compressed terminal RAV 1.25 - 3.5, RAV 2 - 3.5

Weight 0.4kg 0.6kg 0.5kg

ATTENTION

1. Allowable Momentary Power Failure Time: It is the time that the input voltage keeps

normal output voltage (normal operation) in the state that AC 110/220V voltage is lower

than the rated value (AC85/170V).

- 4 -

2. Over current protection: If the current is more than the standard and flows in DC 5V, DC

24V circuit, the over current protection device shuts down the circuit to stop the system.

Remove the causes such as lack of current capacity or short circuits that leads to over

current and then restart the system.

3. Over voltage protection: The over voltage protection device shuts down the circuit to

stop the system, if the voltage is greater than the standard and is applied to the DC 5V

circuit

Power supplies for ML200R

ATTENTION

The main reason for using redundant power supply is that it has a component and the CPU

checks this component for the status of power failure. This component is not available in a non-

redundant power supply.

The following table provides the specifications of the power modules for ML200R.

1.3 Types of modules

The following are the different types of modules supported for ML200 IEC and ML200R.

lInput/Output module

lSpecial module

lCommunication module

Input/Output module

The following table provides details about the different types of input and output modules.

Table 6: Types of I/O modules

- 5 -

Chapter 1 - Masterlogic components

Item Type Description

Digital input module 2MLI-D21A DC 24V input, 8 points (current source/sink input)

2MLI-D22A DC 24V input, 16 points (current source/sink

input)

2MLI-D24A DC 24V input, 32 points (current source/sink

input)

2MLI-D28A DC 24V input, 64 points (current source/sink

input)

2MLI-D22B DC 24V input, 16 points (current source input)

2MLI-D24B DC 24V input, 32 points (current source input)

2MLI-D28B DC 24V input, 64 points (current source input)

2MLI-A12A AC 110V input, 16 points

2MLI-A21A AC 220V input, 8 points

Digital output module 2MLQ-RY1A Relay output, 8 points (2A, independent COM)

2MLQ-RY2A Relay output, 16 points (2A)

2MLQ-RY2B Relay output, 16 points (2A), built-in varistor

2MLQ-TR2A Transistor output, 16 points (0.5A, sink output)

2MLQ-TR4A Transistor output, 32 points (0.1A, sink output)

2MLQ-TR8A Transistor output, 64 points (0.1A, sink output)

2MLQ-TR2B Transistor output 16 points (0.5A, source output)

2MLQ-TR4B Transistor output 32 points (0.1A, source output)

2MLQ-TR8B Transistor output 64 points (0.1A, source output)

2MLQ-SS2A Triac output, 16 points (0.6A)

Special module

The following table provides the details about the different types of special modules.

Table 7: Types of special modules

- 6 -

Item Type Description

Analog input module 2MLF-AV8A Voltage input, 8 channels

2MLF-AC8A Current input, 8 channels

2MLF-AD8A Voltage or current input, 8 channels

2MLF-AD4S Voltage or current input, 4 channels,

Isolated

2MLF-

AD16A

Voltage or current input, 16 channels

2MLF-AC4H Current input, 4 channels

Analog output module 2MLF-DV4A Voltage output, 4 channels

2MLF-DC4A Current output, 4 channels

2MLF-DC8A Current output, 8 channels

2MLF-DV8A Voltage output, 8 channels

2MLF-DC4S Current output, 4 channels, isolated

2MLF-DC4H Current output, 4 channels

High speed counter

module

2MLF-HO2A Pulse input, 2 channels, open collector

2MLF-HD2A Pulse input, 2 channels, line drive

Temperature input module 2MLF-RD4A RTD input, 4 channels

2MLF-RD8A RTD input, 8 channles

2MLF-RD4S RTD input, 4channels, Isolated

2MLF-TC4S Thermocouple input, 4channels, Isolated

Event input module 2MLF-SOEA Event input SOE, 32 channels

Communication module

The following table provides details about the different types of communication modules.

Table 8: Types of communication modules

- 7 -

Chapter 1 - Masterlogic components

Item Type Description

Snet 2MLL-C22A Serial communication, RS-232C 2channels

2MLL-C42A Serial communication, RS-422 2channels

2MLL-CH2A Serial communication, RS-232C/RS-422 (1ch each)

Dnet 2MLL-DMEA DeviceNet interface module

FEnet 2MLL-EFMT Fast Ethernet, 100/100Mbps, RJ-45 (Electric)

2MLL-EFMF Fast Ethernet, 100/100Mbps, SC Type (Fiber Optic)

Pnet 2MLL-PMEA Profibus, master, 12Mbps, DP Standard

2MLL-PSEA Profibus slave interface

2MLL-PSRA Profibus remote interface, DP standard

ATTENTION

The 2MLL-PSRA must be installed only on ML200-IEC CPU bases.

1.4 Types of base

The ML200-IEC and ML200R comprises of main base and expansion base.

ML200-IEC Main base

The main base of ML200-IEC consists of the power module, CPU module, I/O module, special module,

and the communication module.

The following table lists the types of bases for ML200-IEC.

Table 9: Types of bases for ML200-IEC

PLC Types Part Number Description

2MLI-CPUH

2MLI-CPUS

2MLI-CPUU

2MLB-M04A Main base 4 slot

2MLB-M06A Main base 6 slot

2MLB-M08A Main base 8 slot

2MLB-M12A Main base 12 slot

2MLI-CPUS/P

2MLR-M06P Main base 6 slot

2MLR-E08P Main base 8 slot

2MLR-E12P Main base 12 slot

- 8 -

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Controller Handbücher

Honeywell

Honeywell Optiflex Montageanleitung

Honeywell

Honeywell UMC800 Bedienungsanleitung

Honeywell

Honeywell ML6421 Bedienungsanleitung

Honeywell

Honeywell Elster Jeavons J125 Bedienungsanleitung

Honeywell

Honeywell MO953 Series Montageanleitung

Honeywell

Honeywell VR4305 Bedienungsanleitung

Honeywell

Honeywell CIPer 50 Installations- und Betriebshandbuch

Honeywell

Honeywell ML7295E Bedienungsanleitung

Honeywell

Honeywell ML6874 Bedienungsanleitung

Honeywell

Honeywell Lyric Bedienungsanleitung

Honeywell

Honeywell UDC 2300 Bedienungsanleitung

Honeywell

Honeywell S7014A Series Bedienungsanleitung

Honeywell

Honeywell MT4-024 Bedienungsanleitung

Honeywell

Honeywell T775A Bedienungsanleitung

Honeywell

Honeywell HUPF Series Bedienungsanleitung

Honeywell

Honeywell DCP 250 Installationsanleitung

Honeywell

Honeywell CUL6438SR-CV1 Bedienungsanleitung

Honeywell

Honeywell 7800 SERIES RM7895A Bedienungsanleitung

Honeywell

Honeywell Ex-Or MLS Installations- und Betriebshandbuch

Honeywell

Honeywell HON 380 Bedienungsanleitung

Honeywell

Honeywell UDC1200 MICRO-PRO Benutzerhandbuch

Honeywell

Honeywell UDC2500 Bedienungsanleitung

Honeywell

Honeywell 10260S series Leitfaden

Honeywell

Honeywell UDC 6300 Leitfaden

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung