Honeywell ML8824 Series Bedienerhandbuch

ML8824 Series

Linear Electric Valve Actuator

INSTALLATION INSTRUCTIONS:

Instructions:

1. Floating control (when dip switch S2-8 is set to ON)

2. Input signal is invalid when using ﬂoating control.

24V

A1-A6: Installation

FD-LV-0.6.2019-V01

Floating control

MU1B-0685GE51 R0620A

DIP Switch Setting

A6 B:Manual

Clockwise

Anticlockwise

24V

A5: Self-Adaption Mode

FD-LV-0.6.2019-V01

DIP Function Function Description of Setting Value

S2-1 Setting of control/

feedback signal

ON 20%: The control/feedback signal is 4~20mA or 2~10VDC

OFF 0: The control/feedback signal is 0~20mA or 0~10VDC (factory default)

S2-2 Setting of control signal

type

ON II: The control signal is current type.

OFF UI: The control signal is voltage type. (factory default)

S2-3 Setting of control signal

input impedance

ON UI: The control signal is voltage type. (factory default)

OFF II: The control signal is current type.

S2-4 Setting of valve position

feedback signal type

ON IO: The valve position feedback signal is current type.

OFF UO: The valve position feedback signal is voltage type. (factory default)

S2-5 Setting of operating

mode

ON DA: When control signal increases, actuator moves downward. When control signal decreases, actuator moves upward.

OFF RA: When the control signal increases, the actuator moves upward. When control signal decreases, the actuator moves downward.

(factory default)

S2-6 Setting of signal inter-

ruption mode

ON DW: When the control signal type is set as voltage or current, the actuator will automatically provide a minimum control signal if the

signal cable is cut. (factory default)

OFF

UP: 1)When the control signal type is set as voltage, the actuator will automatically provide a maximum control signal if the signal

cable is cut.

2)When the control signal is set as current, actuator will automatically provide a minimal signal when the signal cable is cut.

S2-7 Setting of self-adaption

mode

ON DF: In power-on self-adaption mode. (factory default)

OFF RF: In manual self-adaption mode.

S2-8 Setting of control mode ON Floating control.

OFF Modulating control. (factory default)

S2-9

S2-10 Speed setting ON High speed: 600N - 3s/mm, 1800N - 2s/mm.

OFF Low speed: 600N - 4s/mm, 1800N - 3s/mm.(factory default)

Reserved

Power-on self-adaption: The actuator will directly enter into self-adaption mode

after being powered up. Meanwhile, the yellow indicator on PCB blinks (1Hz) and the

actuator will be automatically full off (traveling to the bottom) and then full on

(traveling to the top). When the indicator stops blinking, it means that the process is

completed. Afterwards, the actuator will travel to the designated position of control

signal.

Manual self-adaption: Press and hold button S1 on PCB for more than 5s (See

Fig. 1) until the indicator starts blinking (1Hz) to enter into self-adaption mode. The

phenomenon will be the same as power-on self-adaption.

MU1B-0685GE51 R0620A

FD-LV-0.6.2019-V01

NFC functionality and parameter settings

Parameters can be set via the supporting app using the NPC function. On the settings interface, select the "Advanced Settings" option to

conﬁgure the maximum opening, dead zones and sensitivity. After conﬁguring the settings, move your device close to the actuator to up-

load the set parameters. A prompt will be displayed in the app indicating that the settings have been uploaded. Return to the parameter

settings interface and move your device close to the actuator to view the conﬁgured parameters.

Parameter Set range or options

Language Chinese, English, Auto

Valve series V5GV, V5011P, V5013P, V5211F

Dead zone 1.0–10.0

Sensitivity 0.5–10.0

Maximum opening 30%–100%

NOTE:

1. To ensure the physical security of the device, it can only be accessed by authorized personnel.

2. Ensure the secure installation, deployment and operation and maintenance management of the device.

3. Models with NFC conﬁguration functionality must be used in conjunction with the dedicated app provided by Honeywell.

4. Install the app on a dedicated phone, ensuring that it has not been jailbroken or that the ﬁrmware has not been replaced. Regularly scan

the phone for viruses and check the app permissions.

5. If a fault occurs during use of the app, please report the error code to Honeywell.

6. If you ﬁnd a vulnerability in the security system, please contact https://www.honeywell.com/en-us/product-security

MU1B-0685GE51 R0620A

Inhaltsverzeichnis

Andere Honeywell Controller Handbücher

Honeywell

Honeywell WEB-8000 Bedienungsanleitung

Honeywell

Honeywell T775R 2000 Series Bedienungsanleitung

Honeywell

Honeywell 4000 Series Bedienungsanleitung

Honeywell

Honeywell S05 Series Bedienungsanleitung

Honeywell

Honeywell ICON 100 SERIES Bedienungsanleitung

Honeywell

Honeywell Satronic DVI 980 Bedienungsanleitung

Honeywell

Honeywell Aquastat L7224U Bedienungsanleitung

Honeywell

Honeywell UDC2800 Bedienungsanleitung

Honeywell

Honeywell HON 5020 Betriebsanleitung

Honeywell

Honeywell HC900 Bedienungsanleitung

Honeywell

Honeywell MS4104F1010 Bedienungsanleitung

Honeywell

Honeywell UDC2800 Bedienungsanleitung

Honeywell

Honeywell Z74S-AN Bedienungsanleitung

Honeywell

Honeywell WEB-600E Bedienungsanleitung

Honeywell

Honeywell V4055F Bedienungsanleitung

Honeywell

Honeywell IAQ Poin Bedienungsanleitung

Honeywell

Honeywell Lyric Betriebsanleitung

Honeywell

Honeywell UDC 2300 Bedienungsanleitung

Honeywell

Honeywell Evohome Gebrauchsanweisung

Honeywell

Honeywell CENTRALINE EAGLE Bedienungsanleitung

Honeywell

Honeywell UDC3500 Bedienungsanleitung

Honeywell

Honeywell MT4-024 Bedienungsanleitung

Honeywell

Honeywell VR8300 Bedienungsanleitung

Honeywell

Honeywell Spyder PUL1012S Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch