Honeywell HCM6011I - QuietCare Console Humidifer Bedienungsanleitung

OWNER’S MANUAL

The Honeywell trademark is used by Kaz, Inc. under license from Honeywell International Inc.

Honeywell International Inc. makes no representation or warranties with respect to this product.

Console Humidifiers with Air Washing Technology

MODELS:

HCM-6009

HCM-6009-TGT

HCM-6010-CST

HCM-6011

HCM-6012

HCM-6012I-CST

HCM-6013

HCM-6011WW

When using electrical appliances, basic precautions should always be

followed to reduce the risk of fire, electric shock, and injury to persons,

including the following:

1. Always place this humidifier on a firm, flat and level surface. This humidifier may not work

properly on an uneven surface.

2. Place this humidifier in an area where it is not accessible to children.

3. Do not place the humidifier near any heat sources such as stoves, radiators, and heaters.

4. Do not use the humidifier outdoors.

5. Before using the humidifier, check the power cord for any signs of damage. If the cord is

found to be damaged, DO NOT USE and return the humidifier to the manufacturer under

the warranty agreement for repair.

6. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk

of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does

not fit securely in the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician. DO NOT attempt to defeat this safety feature.

7. To disconnect the humidifier, first turn controls to the OFF position, then grip the plug and

pull it from the wall outlet. Never pull by the cord.

8. A loose fit between the AC outlet (receptacle) and plug may cause overheating and a

distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.

9. The humidifier should always be unplugged and emptied when not in operation or while

being serviced or cleaned.

10. Never tilt or attempt to move the humidifier while it is operating or filled with water.

UNPLUG the humidifier before moving.

11. This humidifier requires regular cleaning. Refer to the CLEANING instructions

provided. Never clean the humidifier in any manner other than as instructed in this

manual.

12. Do not direct moisture flow directly at individuals, walls or furniture.

13. When a humidifier is used in a closed room or small rooms, check periodically for proper

ventilation, as excessive humidity can cause condensation stains on walls.

14. Turn the humidifier OFF if you notice moisture on the inside of your windows. For proper

humidity reading use a hygrometer, which is available in many hardware and department

stores, or by ordering one from the manufacturer.

15. This product is intended for residential use only.

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS

HUMIDIFIER

Introduction

H O W D O E S I T W O R K ?

COOL MOISTURE SYSTEM:

Dry air is pulled through the humidifier and the QuietCare™ fan blows out invisible, moisture-balanced

air. Unwanted minerals and bacteria from the water are trapped inside the Filter. When the unit is running

you will not see or feel a “mist”. You will know your humidifier is putting moisture into the air as you

watch the water level in your tank decrease throughout the day.

AIR WASHING PRE FILTER:

The Filter in your humidifier also includes a specially formulated “pre-filter” which helps capture some

dust, dirt, pollen and other small particles that pass through the filter.

Protec™Treated Filter: Your filter has been treated with Protec™which helps prevent surface growth and

migration of mold, mildew, algae, fungus and odor-causing bacteria in the filter for its life – approximately

1-3 months**. Keep in mind, depending on your water quality, mineral deposits can still clog or discolor

the filter, affecting its life and that of the humidifier.

**The agent contained in this product is intended to prolong filter life only by inhibiting the growth of unsightly mold, mildew and algae, as well as controlling

odor from odor-causing bacteria. The filter does not protect users or others against bacteria, viruses, germs or other disease-causing organisms. Always follow

the humidifier manufacturer’s instructions regarding cleaning, maintenance and servicing of your humidifier.

Set-Up

NOTE: We recommend that the humidifier be disinfected prior to first use.

Please see CLEANING INSTRUCTIONS.

Select a firm, level, flat location - at least six inches (15 cm) from any wall for proper air flow. Place the

humidifier on a water-resistant surface, as water can damage furniture and some flooring.

Kaz will not accept responsibility for property damage caused by water spillage.

Install Casters:

• Make sure the humidifier is unplugged and in the OFF position.

• Turn the Base of the humidifier upside down.

• Push the wheels into each wheel base pin until you hear them snap into

position (Fig.1).

NOTE: Save your box for end of season storage (See End of Season Care

and Storage Section).

Water Tank

Base

Casters

Pre-Filter

Your Humidifier

Fig. 1

Tank Cap

Motor

Housing

Filter

• Remove the Water Tanks by grasping the handle and pulling straight up. Set aside (Fig. 2).

• Lift up on the Motor Housing to remove and set aside (Fig. 3). Remove the

Filter from the Base before filling the unit with water. Soak the Filter in a

sink full of cool water to help reduce mineral buildup and place back in the

humidifier while wet. DO NOT SQUEEZE OR WRING OUT THE FILTER. To

help extend the life of your Filter, repeat this step each time you fill your

humidifier.

• Turn the Water Tank upside down so that the Fill Cap is facing up; unscrew

the Fill Cap by turning it counter-clockwise and set aside.

• Fill each Water Tank with COOL tap water (Fig. 4). Distilled water is not

necessary as the water is filtered by the Filter. DO NOT USE HOT WATER. Doing

so may damage the humidifier.

• Replace the Fill Cap by turning it clockwise . DO NOT OVER-TIGHTEN.

Turn the Water Tank right-side up.

NOTE: When carrying the filled Water Tank please use the handle and place

your other hand under the tank for additional support. Carry only one at a time.

• Place the Motor Housing back into the Base.

• Position each Water Tank in the humidifier and push into place. Some water will

empty into the Base. Note: The tanks do not drain simultaneously, one tank

will drain before the other.

• Once the filled tanks have been positioned, do not attempt to move the humidifier.

If it has to be moved, unplug the humidifier and remove the Water Tanks first.

CAUTION: DO NOT POUR WATER INTO THE GRILLE IN THE FRONT

OF THE HUMIDIFIER. DOING SO MAY DAMAGE THE HUMIDIFIER OR

CAUSE PERSONAL INJURY.

Manual Control Operation (Models HCM-6009, HCM-6011, HCM-6011WW)

P O W E R

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET

HANDS AS AN ELECTRICAL SHOCK COULD OCCUR.

• With the power switch in the OFF position, plug

the filled humidifier into a polarized 120V outlet.

DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will

only fit one way.

O U T P U T / F A N S P E E D C O N T R O L

Set the fan speed to the desired position (Fig. 5).

HIGH: For fast humidifying

MED: For everyday moisture control

LOW: For minimum operation (ideal for nighttime use, or when silent operation is needed)

NOTE: Turn the humidifier off if the humidity level feels too moist or you notice condensation

forming on the walls.

Power Light

(Illuminated)

Fig. 5

Humidistat

Knob

Fan Speed

Knob

Desired

Humidity

Light

Fig. 4

Fig. 3

Filling

Fig. 2

Manual Control Operation (Models HCM-6009, HCM-6009-TGT, HCM-6011, HCM-6011WW) (Continued)

H U M I D I S T A T

The humidistat allows you to adjust and select the humidity level

to your personal preference. Your humidifier will turn on and off

throughout the day and night to maintain the desired humidity level

you have selected.

H O W T O S E T T H E H U M I D I S T A T

First, turn the humidifier on and select your output/speed level.

Set the humidistat on High by turning the knob clockwise to the

end (Fig. 5).

• Let the humidifier run on high for a least one hour or until your

room has reached a comfortable humidity level.

• At this point, slowly turn your Humidistat knob counter-clockwise until the humidifier shuts off and

the Desired Humidity light illuminates (Fig. 6).

• Now that your Humidistat knob is set, the humidifier will automatically turn back on when your room

drops below your comfort setting and will automatically turn off again when the setting is reached.

NOTE: If the humidifier fan will not start or restart when you select a fan speed, the Advanced Mist™

Humidistat may be set too low. Turn the dial clockwise to the end (Fig. 5). The Desired Humidity light

will turn Off when the unit is producing moisture. When the Desired Humidity light turns ON, you have

reached optimal humidity.

Fig. 6 Power Light

(Illuminated)

Desired

Humidity Light

(Illuminated)

P O W E R

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET

HANDS AS AN ELECTRICAL SHOCK COULD OCCUR.

• With the power OFF, plug the filled

humidifier into a polarized 120V outlet.

DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will

only fit one way.

S T E P 1 : P O W E R

• Press the Power button to start the humidifier. Your humidifier

will automatically start on High power, Continuous Mode (Fig. 7).

Fig. 7

Fan Speed

Control

Humidistat

Control

Power

Button

EasySet™Control Operation (Model HCM-6013i)

EasySet™Control Operation (Model HCM-6013i) (Continued)

• To turn your humidifier OFF simply press the Power button again.

S T E P 2 : O U T P U T / F A N S P E E D C O N T R O L

Your unit has three output levels/fan speeds:

HIGH: For fast humidifying

MED: For everyday moisture control

LOW: For minimum operation (ideal for nighttime use)

• Push the up button (+) to increase output level and push the

down button ( ) to decrease output level. The LED’s will

illuminate to reflect which speed you have selected (Fig. 8).

NOTE: Turn the humidifier off if the humidity level feels too

moist or you notice condensation forming on the walls.

S T E P 3 : S E T H U M I D I T Y

• Set your desired humidity anywhere between 35% and 55%.

• Push the up button (+) to increase desired humidity and push the

down button ( ) to decrease desired humidity. The LED’s will

illuminate to reflect which desired humidity level you have

selected (Fig. 9).

For example: If you set your humidity at 40%, the 35% and 40%

LED’s will be illuminated.

• Once you have set your desired humidity, the unit will operate

under this setting until the unit is turned off or your selected

humidity is reached.

• When the desired room humidity has been reached the fan

will automatically shut off. (The humidity LED’s will remain

illuminated)

• The fan will turn back on when your room decreases beyond your set level.

NOTE: Your room humidity can often fluctuate. It is normal for your unit to turn itself on and off

throughout the day as it is monitoring your changing environment.

To turn your unit off and then back on and select your desired output setting (see Step 2).

Fig. 8

Fig. 9

P O W E R

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET

HANDS AS AN ELECTRICAL SHOCK COULD OCCUR.

• With the power OFF, plug the filled humidifier into a polarized 120V

outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it

will only fit one way.

S T E P 1 : P O W E R

• Press the Power button to start the humidifier. Your humidifier will

automatically start on High power, Continuous Mode. The display

will be illuminated and will reflect the current room humidity

(Fig. 10).

• To turn your humidifier OFF simply press the Power button again.

S T E P 2 : O U T P U T / F A N S P E E D C O N T R O L

Your unit has three output levels/fan speeds:

HIGH: For fast humidifying

MED: For everyday moisture control

LOW: For minimum operation (ideal for nighttime use)

• To change your fan speed press the fan speed button ( ) up or

down (Fig. 11).

• Once you have selected your desired speed the display will go back

to showing the current room humidity after 3 seconds.

NOTE: If you wish to change or check your output/speed setting simply

press the fan speed button ( ) once and it will show you your setting.

If you would like to change it, continue to push the button up or down

until you have reached your desired setting. Again, after 3 seconds the

display will revert to showing the current room humidity.

NOTE: Turn the humidifier off if the humidity level feels too moist

or you notice condensation forming on the walls.

S T E P 3 : T I M E R C O N T R O L

• You can set your timer for up to 18 hours. This function should only

be used if you desire that the humidifier be automatically shut off

after a certain period of time.

• Press the Timer button ( ) up or down to set how many hours you

would like the humidifier to run (Fig. 12).

• When the display indicates your desired time, wait 3 seconds.

• After 3 seconds, your desired time is set and the display will revert back to showing the current room

humidity.

NOTE: If you wish to change your timer setting or check to see how much time is left, simply press the

Timer button ( ) once and it will show you the time left. If you want to change the time remaining,

continue to push the button up or down until you have reached your desired time. Again, after 3 seconds

the display will revert to showing the current room humidity. If you set a timer but no longer wish to have

it set, turn the unit off and then repeat steps 1 and 2.

Digital EasySet™Control Operation (Model HCM-6012 & HCM-6012-CST)

Fig. 10

Fig. 11

Fig. 12

Humidistat

Control

Fan Speed

Control Timer

Control

Desired

Humidity

Light

S T E P 4 : S E T H U M I D I T Y

• You can set your desired humidity in 1% increments anywhere from 25% to 65%.

• To set your desired humidity, press the humidity button ( ) up or down (Fig. 13).

• When the display indicates your desired humidity setting wait 3 seconds.

• After 3 seconds your desired humidity is set and the display will revert back to showing the current

room humidity.

NOTE: If you wish to change your humidity setting or check to see what you set, simply press the humidity

button once and it will show you the set humidity. If you want to

change it, continue to push the button up or down until you have

reached your new desired humidity. Again, after 3 seconds the

display will revert to showing the current room humidity.

• Once you have set your humidity the unit will operate under this

setting until the unit is turned off or your selected humidity is

reached.

• When your desired room humidity has been reached the fan will

shut off and the house icon ( ) on the top of your display will

illuminate (Fig. 14). It will stay illuminated until your desired

humidity decreases at which time the fan will turn back on.

NOTE: Your room humidity can often fluctuate. It is normal for

your unit to turn itself on and off throughout the day as it is

monitoring your changing environment.

To go back to continuous mode, turn your unit off and then

back on and select your desired output setting (see step 2).

Digital EasySet™Control Operation (Model HCM-6012 & HCM-6012-CST) (Continued)

Fig. 13

Fig. 14

NOTE: To ensure proper humidity in your home, you should use a

hygrometer (room humidity indictor) such as the E-10 and place across

the room from your humidifier.

(Hygrometer sold separately)

Cleaning

STEP ONE:

SCALE REMOVAL

BASE

1. Fill the Base with:

• 1 cup (8 ozs.) of undiluted white vinegar

2. Let solution stand for 20 minutes.

3. With the vinegar in the Base, clean all interior

surfaces with a soft cloth or brush to help

remove scales.

4. Rinse the Base thoroughly with water to remove

scale and cleaning solution.

STEP TWO:

DISINFECTING

WATER TANK/BASE

1. Fill the Water Tank with:

• 1 teaspoon of household bleach

and

• 1 gallon of water

Pour some of this solution into the Base.

2. Let solution stand for 20 minutes.

3. Rinse with water until the smell of bleach

is gone.

NOTES:

• The use of other water treatment products and chemicals may cause deterioration of the Filter or

damage the humidifier, thereby hindering the humidifier’s effectiveness.

You should clean your humidifier regularly as needed.

Cleaning involves two steps, SCALE REMOVAL and DISINFECTING.

Be sure to perform these in the proper order to avoid harmful chemical interactions.

• First, turn off and unplug the humidifier.

• Remove the Water Tanks and Motor Housing.

• Remove the Filter from the Base.

• Empty any water from the Base.

NOTE: REMOVE FILTER BEFORE CLEANING

Failure to remove Filter during cleaning will destroy the Filter.

Andere Handbücher für HCM6011I - QuietCare Console Humidifer

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Honeywell Luftbefeuchter Handbücher

Honeywell

Honeywell TrueSTEAM Bedienungsanleitung

Honeywell

Honeywell Enviracaire Elite HE365A Bedienungsanleitung

Honeywell

Honeywell HUL520 Bedienungsanleitung

Honeywell

Honeywell HE120 Bedienungsanleitung

Honeywell

Honeywell HM700AFVALVE Bedienungsanleitung

Honeywell

Honeywell HCM-890 Series Bedienungsanleitung

Honeywell

Honeywell HWC775 Series Bedienungsanleitung

Honeywell

Honeywell HCM-646 - Humidifier With Electronic... Bedienungsanleitung

Honeywell

Honeywell HE250A1005 Bedienungsanleitung

Honeywell

Honeywell HEV320 Series Montageanleitung

Honeywell

Honeywell HE260A Bedienungsanleitung

Honeywell

Honeywell HM509VPIAQ - TrueSTEAM 9 GPD Humidifier PRO... Bedienungsanleitung

Honeywell

Honeywell Enviracaire Elite HE365A Bedienungsanleitung

Honeywell

Honeywell TRADELINE HE360 Bedienungsanleitung

Honeywell

Honeywell Electrode Steam Planungshandbuch

Honeywell

Honeywell HCM-3060 Series Bedienungsanleitung

Honeywell

Honeywell HWM 500 - UV Warm Moisture Humidifier Bedienungs- und Wartungshandbuch

Honeywell

Honeywell HE360A - Whole House Powered Humidifier Bedienungsanleitung

Honeywell

Honeywell HE225 Kurzanleitung

Honeywell

Honeywell HE420A Bedienungsanleitung

Honeywell

Honeywell Enviracaire Elite HE365A Bedienungsanleitung

Honeywell

Honeywell enviracaire Elite HE225A Bedienungsanleitung

Honeywell

Honeywell HCM-3060 Series Bedienungsanleitung

Honeywell

Honeywell HUT-102 Series Bedienungsanleitung

Beliebte Luftbefeuchter Handbücher anderer Marken

Bionaire

Bionaire CM1 Handbuch

Air-O-Swiss

Air-O-Swiss AOS 7131 Handbuch

KING

KING K 5002 Rainbow Bedienungsanleitung

Crane

Crane EE-6902 Bedienungsanleitung

Glaziar

Glaziar Ness Bedienungsanleitung

Philips

Philips DreamStation Go Abmessungen

Stadler Form

Stadler Form Hera Bedienungsanleitung

Hunter

Hunter 31206 Bedienungsanleitung

TaoTronics

TaoTronics TT-AH004 Bedienungsanleitung

adorini

adorini Cigar Heaven Bedienungsanleitung

Lanaform

Lanaform Aroma Bedienungsanleitung

Aprilaire

Aprilaire 800 Series Bedienungsanleitung

Pyle

Pyle SereneLife PHUMDIF8 Bedienungsanleitung

Trotec

Trotec B 200 Bedienungsanleitung

Pure Humidifier

Pure Humidifier EC Series Bedienungsanleitung

Crane

Crane EE-864 Bedienungsanleitung

air&me

air&me Solnan Bedienungsanleitung

weewell

weewell WHC730 Bedienungsanleitung