Honeywell PRO-2200 Bedienungsanleitung

PRO-2200

Output Module

Installation Manual

Part Number: PRO22OUT

TD1142 rev0501

A division of Northern Computers, Inc.

PRO-2200 Output Module PRO22OUT 3Installation Guide

Contents

Warnings and Cautions........................................................................................4

Disclaimer...........................................................................................................6

Product Liability; Mutual Indemnification ................................................................6

Unpacking Procedure...........................................................................................6

Shipping Instructions ............................................................................................7

Limited Warranty..................................................................................................7

Confidentiality .....................................................................................................8

Description..........................................................................................................9

Set Up ...............................................................................................................9

LED Operation ..................................................................................................11

Power ...............................................................................................................11

Communications ...............................................................................................11

Alarm Contact Wiring ........................................................................................12

Control Output Wiring .......................................................................................12

Mounting Options .............................................................................................13

Suggested Installation Sequence .........................................................................13

Specification......................................................................................................14

Wiring Diagram for Connectors 1 through 8........................................................15

Wiring Diagram for Connectors 7 through 11......................................................16

Notes................................................................................................................17

4 PRO-2200 Output Module PRO22OUTInstallation Guide

Warnings and Cautions

WARNING

Before installation, TURN OFF the external circuit breaker which supplies power to the

system.

Before connecting the device to the power supply, verify that the output voltage is within

specifications of the power supply.

Do not apply power to the system until after the installation has been completed.

Personal injury or death could occur, and the equipment could be damaged beyond

repair, if theseWARNINGSare not observed!

WARNING

Fire Safety and Liability Notice

Never connect card readers to any critical entry, exit door, barrier, elevator or gate

without providing an alternative exit in accordance with all fire and life safety codes

pertinent to the installation.These fire and safety codes vary from city to city and you

must get approval from local fire officials whenever using an electronic product to control

a door or other barrier.Use of egress buttons, for example, may be illegal in some cities.

In most applications, single action exit without prior knowledge of what to do is a life

safety requirement.Always make certain that any required approvals are obtained in

writing.DO NOT ACCEPTVERBAL APPROVALS,THEY ARE NOTVALID.

Engineered Systems never recommends using the PRO-2200 or related products as a

primarywarning or monitoringsystem. Primary warning or monitoring systems should

always meet local fire and safety code requirements.The installer must also test the

system on a regular basis by instructing the end user in appropriate daily testing proce-

dures.Failure to test a system regularly could make installer liable for damages to the end

user if a problem occurs.

WARNING

EARTH groundall enclosures, for proper installation.

WARNING

Use suppressors on all door strikes. Use S-4 suppressors for installation. Engineering

Systems recommends only DC strikes.

The information in this document is subject to change without notice.

PRO-2200 Output Module PRO22OUT 5Installation Guide

CAUTION

IF ANY DAMAGETO THE SHIPMENT IS NOTICED, A CLAIM MUST BE FILED WITH

THE COMMERCIAL CARRIER RESPONSIBLE.

CAUTION

Electro-static discharge can damage CMOS integrated circuits and modules.

To prevent damage always follow these procedures:

Use static shield packaging and containers to transport all electronic components,

including completed reader assemblies.

Handle all ESD sensitive components at an approved static controlled workstation.These

workstations consist of a desk mat, floor mat and an ESD wrist strap.Workstations are

available from various vendors.

NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules.These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

NOTICE

This document and the data in it shall not be duplicated, used or disclosed to others for

procurement or manufacture, except as authorized by and with the written permission of,

Engineering Systems.The information contained in this document or in the product itself

is considered the exclusive property and trade secrets of Engineering Systems.Copyright

laws of the United States protect all information in this document or in the software

product itself.

NOTICE

Any use of this product is subject to the terms and acceptance of the Engineering

Systems Software Agreement. Please request a copy from Engineering Systems, and

reviewtheagreement carefully.

6 PRO-2200 Output Module PRO22OUTInstallation Guide

Disclaimer

Product Liability; Mutual Indemnification

In the event that a Customer receives a claim that a Product or any component thereof

has caused personal injury or damage to property of others, Customer shall immediately

notify Engineering Systems in writing of all such claims. Engineering Systems shall

defend or settle such claims and shall indemnify and hold Customer harmless for any

costsor damages includingreasonable attorneys’ feeswhich Customer maybe required

to pay as a result of the defective Product or the negligence of Engineering Systems, its

agents, or its employees.

Customer shall hold harmless and indemnify Engineering Systems from and against all

claims, demands, losses and liability arising out of damage to property or injury to

persons occasioned by or in connection with the acts or omissions of Customer and its

agents and employees, and from and against all claims, demands, losses and liability for

costs of fees, including reasonable attorneys’ fees, in connection therewith.

Unpacking Procedure

CAUTION

If any damage to the shipment is noticed before unpacking, a claim must be filed with the

commercial carrier.

All containers should be opened and unpacked carefully in order to prevent damage to

the contents.

Follow these steps to unpack equipment in preparation for installation:

1. Open the container and remove the unit(s) and all packing material. Retain the

container and all packing materials. They may be used again for reshipment

ofthe equipment, if needed.

2. Inspect the contents for shortage.If items are missing items, contact the order entry

department at800-323-4576.

3. Visually check contents. If damage is discovered, perform the following:

If shipping caused damage to the unit, a claim must be filed with the

commercialcarrier.

If any other defect is apparent, call 800-323-4576 for a return authorization.

PRO-2200 Output Module PRO22OUT 7Installation Guide

Shipping Instructions

To ship equipment back to Engineering Systems:

1.Contactthe customerservicedepartmentat 800-323-4576,before returning equipment.

Beforecalling, please haveavailable:

•A description of the problem or reason for returning the equipment.

•Original purchase order number, invoice number and if the unit is under warranty.

•A new purchase order number if the unit is not under warranty

2. Obtain the Return Authorization Number (RMA) from the customer service

department at800-323-4576.

3.Show the RMA number on all packages shipped.Packages, which are not marked with

an RMA number will be refused at the factory and returned to you COD.

4.Carefully pack the equipment for shipment. Use the original packingmaterial whenever

possible.

Limited Warranty

All Products sold or licensed by Engineering Systems include a warranty registration card

which must be completed and returned to Engineering Systems by or on behalf of the end

user in order for Engineering Systems to provide warranty service, repair, credit or ex-

change. All warranty work shall be handled through Customer which shall notify Engineer-

ing Systems and apply for a Return Merchandise Authorization (RMA) number prior to

returning any Product for service, repair, credit or exchange. Engineering Systems

warrants that its Products shall be free from defects in materials and workmanship for a

period of two years from date of shipment of the Product to Customer.The warranty on

Terminals, Printers, Communications Products and Upgrade kits is 90 days from date of

shipment. Satisfaction of this warranty shall be limited to repair or replacement of Prod-

ucts which are defective or defective under normal use. Engineering Systems’warranty

shall not extend to any Product which, upon examination, is determined to be defective as

a result of misuse, improper storage, incorrect installation, operation or maintenance,

alteration, modification, accident or unusual deterioration of the Product due to physical

environments in excess of the limits set forth in Product manuals.THERE ARE NO

WARRANTIESWHICH EXTEND BEYONDTHIS PROVISION.THISWARRANTY IS IN

LIEUOF ALL OTHERWARRANTIESWHETHER EXPRESS, IMPLIED OR STATUTORY,

INCLUDINGIMPLIEDWARRANTIESOF MERCHANTABILITY OR FITNESSFOR ANY

PARTICULAR PURPOSE.NO REPRESENTATIONORWARRANTYOFTHEDISTRIBU-

TOR SHALL EXTENDTHE LIABILITY OR RESPONSIBILITY OFTHE MANUFACTURER

BEYONDTHETERMS OFTHIS PROVISION.IN NO EVENT SHALL ENGINEERING

SYSTEMS BE LIABLE FOR ANY RE-PROCUREMENT COSTS, LOSS OF PROFITS,

LOSS OF USE, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGESTO ANY

PERSON RESULTING FROMTHE USE OF ENGINEERING SYSTEMS’PRODUCTS.

8 PRO-2200 Output Module PRO22OUTInstallation Guide

Confidentiality

All software, drawings, diagrams, specifications, catalogs, literature, manuals and other

materials furnished by Engineering Systems relating to the design, use and service of the

Products shall remain confidential and shall constitute proprietary rights of Engineering

Systems and Customer agrees to treat such information as confidential. Customer shall

acquire no rights in the design of the Products or the related materials except to use such

information solely for the purpose of and only during the time it sells the Products. Cus-

tomer shall not copy the design of any of the Products or use or cause to be used any

Product design or related materials for its own benefit or for the benefit of any other party.

The covenants contained in this section shall remain effective throughout the term of this

Agreement and thereafter unless specifically waived by Engineering Systems in writing.

PRO-2200 Output Module PRO22OUT 9Installation Guide

N-1000-IV FourN-1000-IV Four

N-1000-IV Four

Reader BoardReader Board

Reader Board

Description

The Output Board provides connections for 16 relay outputs. This board can be rack

mounted, in which case, only one edge is accessible for wiring. Mounting the board flat

increases the amount of available I/O slightly but also significantly decreases the number

of boards that can be mounted in one enclosure.

Starting at the bottom of the rack-mount side of the board, the first connector provides

power to the board. The next connector provides communication with the Controller

(PRO22IC). Continuing up this edge, the next 6 connectors provide 12 relay output

connections.

When the board is mounted flat, four additional relay outputs and two dedicated alarm

inputs for cabinet tamper and power fault detection are available on the opposite edge of

theboard.

All 16 form-C relay outputs are designed to handle dry-circuit signals. The two dedicated

inputs are non-supervised. Communication to the control panel is accomplished via an

RS-485interface.This board requires12VDCinput power.

When communication to the Controller is lost, this board maintains all previous output

settings at the time communication was lost.

Set Up

JumperSettings:

repmuJ gnitteS tluafeD detceleS

1J FFO *evitcatonsirotanimretLOE584-SR1troP

NOevitcasirotanimretLOE584-SR1troP

10 PRO-2200 Output Module PRO22OUTInstallation Guide

Dipswitch Settings:

8S 7S 6S 5S 4S 3S 2S 1S NOITCELES

FFOFFOFFOFFONO*1SSERDDA

FFOFFOFFONOFFO2SSERDDA

FFOFFOFFONONO3SSERDDA

FFOFFONOFFOFFO4SSERDDA

FFOFFONOFFONO5SSERDDA

FFOFFONONOFFO6SSERDDA

FFOFFONONONO7SSERDDA

FFONOFFOFFOFFO8SSERDDA

FFOFFO devreseR

FFONO SPB006,9

NOFFO SPB002,91

NONO *SPB004,83

FFO *desUtoN

* = Default

Andere Handbücher für PRO-2200

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell E/A-System Handbücher

Honeywell

Honeywell AUDZBX75 Bedienungsanleitung

Honeywell

Honeywell Series 8 I/O Bedienungsanleitung

Honeywell

Honeywell Smart IO Bedienungsanleitung

Honeywell

Honeywell 2MLF-DV4S Bedienungsanleitung

Honeywell

Honeywell Notifier M710E Bedienungsanleitung

Honeywell

Honeywell Sylk SI06042 Bedienungsanleitung

Honeywell

Honeywell SLATE R8001U3001 Bedienungsanleitung

Honeywell

Honeywell PRO4200 Bedienungsanleitung

Honeywell

Honeywell XIO-10HUB Bedienungsanleitung

Honeywell

Honeywell W7761A Bedienungsanleitung

Honeywell

Honeywell ALERTON ACM-VLX Betriebsanleitung

Honeywell

Honeywell Multisite XIO Series Programmierhandbuch

Honeywell

Honeywell XIO-8AI Bedienungsanleitung

Honeywell

Honeywell NOTIFIER FMM-4-20 Bedienungsanleitung

Honeywell

Honeywell PW6K1IN Bedienungsanleitung

Honeywell

Honeywell PEHA PHC 940/16 AM Bedienungsanleitung

Honeywell

Honeywell Excel 5000 open XFL521B Bedienungsanleitung

Honeywell

Honeywell PW6K1OUT Bedienungsanleitung

Honeywell

Honeywell Excel 5000 System Series Bedienungsanleitung

Honeywell

Honeywell Excel 5000 open XFL521B Bedienungsanleitung

Honeywell

Honeywell TC4S Bedienungsanleitung

Honeywell

Honeywell 2MLF-AV8A Bedienungsanleitung

Honeywell

Honeywell Pro-Watch 7000 Bedienungsanleitung

Honeywell

Honeywell Notifier NRX-M711 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung