Honeywell Galaxy Mk7 Bedienungsanleitung

Galaxy Mk7 Keypad Installation Instructions

1. Remove the keypad from its packaging.

2. To fix the keypad to the wall, the back plate must firstly be removed from the front plate. To do this,

insert a suitable tool into the opening at the bottom of the keypad and twist gently.

Warning: When the keypad is separated ensure that anti-static precautions are taken with the

keypad PCB to avoid damage from ESD.

3. Using the back plate as a template, mark the locations for the three fixing screws in the required

position.

4. If using a wall run cable for the keypad(A, B, +12V, 0V) position the cable behind the back plate, in

the cable channels provided. The cable can be run in from either the top or the bottom of the back

plate. Use a sharp tool to remove the plastic from the top or the bottom of the cable guides on the

back plate skirting.

5. Ensuring that the keypad wiring is fed through the large opening on the keypad back plate, position

the keypad base on the wall and fix securely using three No. 6 Pan Head screws1.

6. If an off the wall tamper is required, using a No. 6 Pan Head screw, secure the sacrificial wall

tamper, indicated in figure 1, to the wall, ensuring that the tamper knockout indicated, is still

connected to the back plate moulding.

7. Connect theA, B and power wires to the correct terminals of the removable, four way connector

block.

8. Ensuring that the power is disconnected set the keypad to a unique address using the 16 way rotary

switch on the PCB.

Figure 1 : Galaxy Mk7 Keypad Front and Back Plates

Back Plate

Fixing Holes Sacrificial

Wall

Tamper

Cable Guide

RS485 Connector Opening

Keypad

Door

Fixing Clips

9. To re-assemble the keypad, connect the four way connector block onto the pins on the keypad

PCB.Attach the keypad front plate to the back plate by inserting the two clips on the top of the

keypad front plate into the two apertures at the top of the keypad back plate, then gently push the

bottom of the keypad front plate into the back plate until it snaps securely into place.

10. Keypad part number CP037 has a volume control pot marked VOL at the bottom right-hand

corner of the pcb. To adjust the volume, open up the keypad cover and adjust the pot (+ or -).

NOTE: The keypad door can be re-orientated to allow opening from either the left or right hand sides.

However, it should be noted that fitting or removal of the door should only be done when the front

plate is detached from the back plate.Attempted removal or insertion, of the door, when the keypad

is assembled may cause damage to the keypad mouldings.

NOTE : 1Use of screws other than No. 6 Pan head may damage the keypad mouldings.

EN50131 Compliance

This product is suitable for use in systems designed to comply with PD6662:2004 and

prEN50131-1:2004

Security Grade - 3

Environmental Class - II

This product is suitable for use in systems designed to comply with EN50131-1:1997

Security Grade - 2

Environmental Class - II

Honeywell Security

2 Redwood Crescent

Peel Park Campus

East Kilbride

G74 5PA

II1-0200 Rev 2.1 © Copyright Honeywell Security

Inhaltsverzeichnis

Andere Honeywell Tastenfeld Handbücher

Honeywell

Honeywell 6270 - Ademco TouchCenter Keypad Bedienungsanleitung

Honeywell

Honeywell Accentic proX2 Service-Handbuch

Honeywell

Honeywell GKP Bedienungsanleitung

Honeywell

Honeywell ADEMCO 5839 Bedienungsanleitung

Honeywell

Honeywell Galaxy TouchCenter Plus Bedienungsanleitung

Honeywell

Honeywell TouchCenter TFT BUS-2 Gebrauchsanweisung

Honeywell

Honeywell SiX Series Bedienungsanleitung

Honeywell

Honeywell 6160PX Bedienungsanleitung

Honeywell

Honeywell 6271C - Ademco TouchCenter Color Keypad Bedienungsanleitung

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Montageanleitung

Honeywell

Honeywell 5828V - Ademco Wireless Talking Keypad Montageanleitung

Honeywell

Honeywell Ademco 6160PX Montageanleitung

Honeywell

Honeywell 6280 Series Bedienungsanleitung

Honeywell

Honeywell ADEMCO 6162RF Bedienungsanleitung

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Montageanleitung

Honeywell

Honeywell ADEMCO 5828 Montageanleitung

Honeywell

Honeywell ADEMCO 6160RF Montageanleitung

Honeywell

Honeywell Lyric LKP500-EN Montageanleitung

Honeywell

Honeywell ADEMCO 6162RF Montageanleitung

Honeywell

Honeywell ADEMCO 6150RF Montageanleitung

Honeywell

Honeywell ADEMCO 6152RF Montageanleitung

Honeywell

Honeywell Ademco 6460S Montageanleitung

Honeywell

Honeywell LKPES8M-EN Bedienungsanleitung

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Montageanleitung

Beliebte Tastenfeld Handbücher anderer Marken

ACT

ACT ACT PRO 1030 Bedienungsanleitung

Cardin

Cardin SSB Series Bedienungsanleitung

Harman Kardon

Harman Kardon KP 1 Bedienungsanleitung

Chamberlain

Chamberlain KPR2000 Benutzerhandbuch

CYP

CYP CR-KP1 Bedienungsanleitung

Aeware

Aeware k-35 Series Referenzhandbuch

Aritech

Aritech CS-175 Series Bedienungsanleitung

GE NetworX NX-1600E Series Bedienungsanleitung

Lenze AC Tech

Lenze AC Tech MC SERIES Bedienungsanleitung

Burg Wächter

Burg Wächter secuENTRY 7711 Bedienungsanleitung

Aeware

Aeware in.k450 Bedienungsanleitung

Lenze

Lenze EPM-H410 Bedienungsanleitung

Toshiba

Toshiba RKP007Z Bedienungsanleitung

Gemini

Gemini GEM-DXK1 KEYPAD Bedienungsanleitung

Russound

Russound MDK-C5 Betriebsanleitung

Bosch

Bosch D1260 Series Bedienungsanleitung

Elmes Electronic

Elmes Electronic KB1 Bedienungsanleitung

Clare Controls

Clare Controls ClareOne CLR-C1-PNC Montageanleitung