Honeywell 2605 Bedienungsanleitung

Read this manual carefully and never store it or the keys

inside the safe!

User Guide

Waterproof Fire Safe

Package Includes;

Please carefully check the above list to conﬁrm all items have been received.

If any items are missing, please contact Consumer Assistance. (see page 9 for contact information).

1 - Waterproof Fire Safe

1 - Operation Manual

2 - Override Access Keys

1 - Mounting Kit

1 - Removable Shelf

4 - Shelf Clips

1Waterproof Fire Safe

ENGLISH

1Operation

Manual

1Mounting

Hardware

2 - Override

Access Keys

1 - Removable

Shelf

Models 2605, 2607 & 2609

DO NOT RETURN SAFE TO STORE

If you are missing parts or have difﬁculty operating your safe, please contact our

Consumer Assistance Department by telephone. Store will not accept returned products

without prior authorization. You must ﬁrst contact our Consumer Assistance Department

(See page 9 for contact information).

Please go to the following webpage to register your product:

www.hymaninc.com/product-registration/

Safe Serial #

Located on the bottom right corner of the safe door frame (Figure 1).

Override Access Key #

Engraved on the Head of the key (Figure 2).

Cylinder #

Engraved on the lock cylinder (Figures 3).

Safe Model #

Safe Serial #

Override Access Key #

User Code

LOCATING SAFE IDENTIFICATION NUMBERS

PRODUCT REGISTRATION

SAFE IDENTIFICATION RECORD

Figure 1 Figure 2 Figure 3

WELCOME ......................................................................................PAGE 1

PROPER SAFE USE .......................................................................PAGE 1

CARE AND MAINTENANCE .........................................................PAGE 1

INTERIOR MOISTURE WARNING ...............................................PAGE 2

GETTING STARTED.........................................................................PAGE 2

INSTALL BATTERIES .....................................................................PAGE 2

TESTING DIGITAL LOCK ..............................................................PAGE 3

PROGRAMMING NEW USER CODE ..........................................PAGE 4

TESTING NEW USER CODE ........................................................PAGE 4

LOCKING AND UNLOCKING .......................................................PAGE 5

TURN SOUND ON AND OFF ........................................................PAGE 5

MOTION ALARM SETTINGS .......................................................PAGE 5

SECURE LOCKOUT PERIOD .......................................................PAGE 6

LOST OR FORGOTTEN USER CODES .......................................PAGE 6

OVERRIDE ACCESS KEY ................................................................PAGE 6

REMOVABLE SHELF .......................................................................PAGE 6

ANCHORING SAFE TO A FLOOR.................................................PAGE 7

ORDERING ADDITIONAL OVERRIDE ACCESS KEYS .............PAGE 8

LOCATING SAFE IDENTIFICATION NUMBERS .......................PAGE 8

CONSUMER ASSISTANCE ..........................................................PAGE 9

WARRANTY ....................................................................................PAGE 10

INDEX

PROPER SAFE USE

CARE AND MAINTENANCE

Your Honeywell Waterproof Fire Safe will provide years of safe and secure protection for

your valuables, important documents and other personal items. All Honeywell safes are

designed and built using the highest manufacturing standards to ensure maximum user

satisfaction under a variety of conditions. With proper care, your Honeywell safe will provide

“Peace of Mind” for many years to come.

Thank you and enjoy!

WELCOME

Honeywell Waterproof Fire Safes are designed to protect paper documents and ﬁles from

heat and water damage due to exposure to ﬁre and ﬂoods.

Fire Protection

Independent testing veriﬁed the interior temperature remains below 350º F (177ºC) for 2

hours when outside temperature is up to 1550ºF (843ºC).

Water Protection

Independent testing veriﬁed that the interior remains dry when completely submerged

for up to 8 hours with up to 50mm of water above the safe.

IMPORTANT: Before using your new safe, it should be opened and aired out for at

least 30 minutes to allow the waterproof seal to decompress and perform as intended.

WARNING: This safe is not intended for the storage of medications, pearls, ﬁrearms,

ammunition, or combustible items of any kind.

When properly maintained, your safe will continue to operate for many years. In order to ensure optimum

performance of your safe, please follow these simple precautions:

CLEAN HANDS - Never attempt to operate the digital keypad if your hands have excessive dirt, debris or

liquids on them.

CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild cleaner (e.g.,

window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER use abrasive

cleansers on the safe or digital keypad.

MOISTURE – We recommend that you place delicate items such as pictures or intricate jewelry into an

air-tight container before storing them in your safe. Avoid placing your safe in areas of high humidity. For

optimum performance, the safe should be opened and aired out for at least 20 minutes every two weeks.

For future reference, store this Operation and Installation Guide in a secure area away from the safe.

DO NOT DISCARD!

INTERIOR MOISTURE WARNING

IMPORTANT: For optimum performance, Waterproof Fire Safes should be opened and aired

out for at least 30 minutes every two weeks to prevent any build up of moisture inside. It is

recommended to occasionally do this for longer periods. This will balance the humidity difference

inside and outside and allow any excess moisture trapped inside to escape. If you do not open

Waterproof Fire Safes on a regular basis to let them air out, you may begin to notice a musty

smell, especially on paperwork. The manufacturer will not be responsible for any damage or loss of

items placed in Waterproof Fire Safes due to moisture. Proper care and preventative maintenance

of Waterproof Fire Safes is the owner’s responsibility. The owner should understand that this is

required to assure continued levels of protection and trouble-free performance during the lifetime.

The batteries must be installed before using your safe. The battery compartment is located inside

the safe on the lock cover panel.

1. Remove battery compartment cover and insert 4 “AA” batteries. Make sure that the

batteries are installed in the correct direction with regard to polarity (+ and -).

(Figure 1 & Figure 2).

2. Proper installation of the batteries will cause the keypad to beep once, the red and green LED

lights will ﬂash twice and the keypad back light will ﬂash once.

3. Replace the battery cover (Figure 3).

4. Leave the door open. Proceed to the “Testing Digital Lock” section on next page.

INSTALL BATTERIES

GETTING STARTED

1. Remove override access rubber lock cover (Figure 1).

2. Insert the override access key into the lock until it stops (Figure 2).

3. With the key inserted turn clockwise to the right (Figure 3).

4. Turn the door handle upwards counterclockwise and pull the safe door open

(Figure 4 & Figure 5).

IMPORTANT: IF THE HANDLE WILL NOT TURN UPWARDS COUNTERCLOCKWISE, FIRST

TURN THE HANDLE SLIGHTLY BACK TO THE LEFT UNTIL IT STOPS, THEN TURN UPWARDS

COUNTERCLOCKWISE AGAIN TO OPEN.

5. Remove override access key and store it in a safe place away from the safe. Replace the

cover over the key lock, leave safe door open, and proceed to “Install Batteries”.

Figure 1 Figure 2 Figure 3 Figure 4 Figure 5

Figure 1 Figure 2 Figure 3

1. With the door open: press and hold the lock release button on the inside edge of the safe door and

while holding, turn the handle downward clockwise to place the bolts in the locked position

(Figure 1 and Figure 2).

2. Press the * key to activate the digital keypad (Figure 3).

Note: Once the * key is pressed, keypad back-light will turn on for 5 seconds. The keypad will

remain active for a period beyond the ﬁve seconds even when the back-light turns off. Once any

key is pressed, the back-light will come back on again.

3. Enter the preset factory code 159# into the keypad. If entered correctly, the green LED will light

and the lock will click. You have 5 seconds to turn the handle upwards counterclockwise placing

the bolts into the unlocked position.

Important: If the handle will not turn upwards after the green light comes on, ﬁrst turn

the handle slightly back to the left until it stops, then turn upwards counterclockwise again

to open.

4. Press and hold the lock release button on the inside edge of the safe door and while holding, turn

the handle downwards clockwise to return the bolts to the locked position

5. Leave the safe door open and proceed to “Programming New User Code”.

TESTING DIGITAL LOCK

Figure 1 Figure 3Figure 2

1. With the door open, press the * key to activate the digital keypad (Figure 1).

Note: Once the * key is pressed, keypad back-light will turn on for 5 seconds. The keypad will

remain active for a period beyond the ﬁve seconds even when the back-light turns off. Once any

key is pressed, the back-light will come back on again.

2. Enter your new user code into the keypad followed by the # key. If entered correctly, the green

LED will light and the lock will click. You have 5 seconds to open the safe by turning the handle

upwards counterclockwise placing the bolts into the unlocked position (Figure 2).

Important: If the handle will not turn upward after the green light comes on, ﬁrst turn

the handle slightly back to the left until it stops, then turn upward counterclockwise again

to open.

Note: If you wish to change you user code, just repeat steps 13. The previous user code will be

automatically deleted and the new user code will become active.

PROGRAMMING NEW USER CODE

TESTING NEW USER CODE

Figure 1

Figure 3Figure 2

Figure 2

For best security, it is recommended that you immediately change the factory preset code to your

own personal user code.

1. Locate and press the reset program button located on the top inside edge of the door (Figure 1).

The red and green LED’s will ﬂash and you will have 10 seconds to perform the next 2 steps.

2. Enter a new 38 digit user code followed by the # key. Then immediately repeat the same entry

followed by the # key to conﬁrm (Figure 2).

3. The Green LED will light for 5 seconds indicating you have successfully programmed your new

user code (Figure 3).

Note: If the red LED lights for 5 seconds and the keypad beeps 3 times, this means that you have

made an incorrect entry and must repeat steps 1 and 2.

4. Leave door open and proceed to “Testing New User Code” section.

If you desire to deactivate the sound on the keypad you can follow the steps below.

Enter # 5 # on the keypad to turn off the sound. Re-enter # 5 # to turn the sound back on.

Note: If when entering your code or programming a new user code you do not hear the key beep, enter

# 5 # to activate the sound.

This safe is equipped with a motion sensor alarm that detects sudden jolts, violent shaking and

vibrations. If you want to use the alarm feature, you must activate it by following the steps below.

There are three levels of sensitivity to choose from:

Low Sensitivity

Medium Sensitivity

High Sensitivity

Turn Off Alarm

Setting the motion alarm

1. Open door

2. Press the reset button and press one of the following options for alarm loudness:

- Low: #1#

- Medium: #2#

- High: #3#

- To turn off the alarm press #0#

3. Your desired alarm settings will be active after the battery lights on the LED go on then off.

Note: You can record your new user code on the “Digital User Code Record” section on page 9 and then

keep this manual in a secure location away from the safe.

LOCKING AND UNLOCKING THE SAFE

TURN SOUND ON AND OFF

MOTION ALARM SETTINGS

Figure 1 Figure 2

1. Close the safe door and turn handle downward to the left placing the door bolts into

the locked position (Figure 1 and Figure 2).

Note: Due to the airtight seal, to close you may have to push inward on the door while turning the

handle downward clockwise to place the blots fully into the locked position.

2. Safe will automatically lock after 5 seconds.

3. Check to ensure safe is locked by attempting to turn the handle to the unlocked position.

Figure 3

Your safe is equipped with an Override Access key which allows immediate access in case you forget

your user codes or the batteries need to be installed or replaced.

SECURE LOCKOUT PERIOD

OVERRIDE ACCESS KEY

REMOVABLE SHELF

If the wrong user code is entered 3 consecutive times in a row, the keypad will automatically lockout

and will not be able to open the safe with the keypad for 15 minutes. During this period, the safe can

be opened and locked with the Override Access key.

LOST OR FORGOTTEN USER CODES

If the user code is lost or forgotten, you may open the safe using the Override Access key and use the

red reset button to reprogram the 38 digit user code. The instructions for opening the safe with the

override access key are located below.

The safe comes with a shelf that can be placed in any of the three preset levels or completely

removed if not needed. To remove the shelf, slide it gently out of the safe. To install the shelf, slide it

in on any of the three preset levels.

1. Remove override access rubber lock cover (Figure 1).

2. Insert the override access key into the lock until it stops (Figure 2).

3. With the key inserted turn clockwise to the right (Figure 3).

4. Turn the door handle upwards counterclockwise and pull the safe door open

(Figure 4 & Figure 5).

IMPORTANT: IF THE HANDLE WILL NOT TURN UPWARDS COUNTERCLOCKWISE, FIRST

TURN THE HANDLE SLIGHTLY BACK TO THE LEFT UNTIL IT STOPS, THEN TURN UPWARDS

COUNTERCLOCKWISE AGAIN TO OPEN.

Figure 1 Figure 2 Figure 3 Figure 4 Figure 5

ANCHORING SAFE TO FLOOR

You may bolt your safe to a shelf or ﬂoor for added theft protection and resistance to tipping.

Your safe has a pre-drilled bolt-down hole in the ﬂoor panel and mounting hardware is

provided for securing to concrete surfaces. If bolting to wood or metal additional hardware will

be needed. Check with your local home center.

To secure your safe to a concrete ﬂoor:

1. Select a suitable and convenient location for your safe (Figure 1).

2. Empty the safe and remove the (6) screws securing the mounting hole

cover plate (Figure 2).

3. Remove the mounting hole cover plate and gasket along with the cap to

uncover the mounting hole (Figure 3).

4. Tilt the safe onto it’s back side and stick a screwdriver into the hole to

punch-out the bottom hole cover plug (Figure 4).

5. Turn safe back onto its feet and place your safe in the desired location for mounting, then

make a mark through the hole onto the ﬂoor surface creating a drilling guide (Figure 5).

6. Move the safe aside to clear the marked spot for drilling. Then drill a 5/8 in./16mm

diameter hole with a depth of 21/8 in./54mm and remove any excess dust

(Figure 6 and Figure 7).

7. Insert the supplied expanding Drop-in Anchor into the hole and tap into place using a

hammer until even with the ﬂoor surface (Figure 8).

8. Hammer a drift punch or phillips head screwdriver into the expanding Drop-in Anchor so

that it ﬂares out and ﬁrmly locks into place to prevent it from turning when mounting the

safe (Figure 9).

9. Place the safe back into position lined up over the hole and secure in place using the

provided mounting bolt. Secure bolt tightly using the supplied hexagon wrench (Figure 10).

10. Replace the gasket and mounting plate cover by using a phillips screwdriver to replace the

6 screws to secure the mounting plate into place (Figure 11).

Figure 1

Important: Bolting/unbolting of the unit is at

the consumer’s expense and discretion. LH

Licensed Products, Inc. is not responsible for

any costs incurred if the unit has to be replaced.

If you have any questions about mounting the

safe, please check with your local home center/

hardware retailer or independent contractor.

Figure 2

Figure 6

Figure 11

Figure 3

Figure 7

Figure 5

Figure 9

Figure 10

Figure 4

Figure 8

Andere Handbücher für 2605

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Sicher Handbücher

Honeywell

Honeywell 5002 Bedienungsanleitung

Honeywell

Honeywell 5103 Bedienungsanleitung

Honeywell

Honeywell 2208 Bedienungsanleitung

Honeywell

Honeywell 1101 Bedienungsanleitung

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Bedienungsanleitung

Honeywell

Honeywell 3511 Bedienungsanleitung

Honeywell

Honeywell 5912 Bedienungsanleitung

Honeywell

Honeywell 2111 Bedienungsanleitung

Honeywell

Honeywell 2208 Bedienungsanleitung

Honeywell

Honeywell Media Protector 2040 Bedienungsanleitung

Honeywell

Honeywell 5912 Anleitung zur Verwendung

Honeywell

Honeywell 2054D - 1 Hour Steel Fire Safe Anleitung zur Verwendung

Honeywell

Honeywell 5101 Bedienungsanleitung

Honeywell

Honeywell 5410 Anleitung zur Verwendung

Honeywell

Honeywell 5911 Bedienungsanleitung

Honeywell

Honeywell 2116 Bedienungsanleitung

Honeywell

Honeywell 5605 Bedienungsanleitung

Honeywell

Honeywell 2070A - 43 Cubic Foot Expandable Anti-Theft Wall... Anleitung zur Verwendung

Honeywell

Honeywell 2911 Bedienungsanleitung

Honeywell

Honeywell 5805 Bedienungsanleitung

Honeywell

Honeywell 2512 Bedienungsanleitung

Honeywell

Honeywell 5101 Bedienungsanleitung

Honeywell

Honeywell 2092D - Waterproof Fire Safe Anleitung zur Verwendung

Honeywell

Honeywell 3518 Bedienungsanleitung

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Phoenix

Phoenix FS0352C Produktinformationsblatt

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

Phoenix

Phoenix FS1280F Bedienungsanleitung

Phoenix

Phoenix SS0992K Produktinformationsblatt

Technomax

Technomax Trony Series Handbuch

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Phoenix

Phoenix SS0100E Produktinformationsblatt

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung

Ankaro

Ankaro ANK EZ I Bedienungsanleitung

Phoenix

Phoenix FS1270E Series Bedienungsanleitung