Honeywell 2901 Bedienungsanleitung

Read this manual carefully and never store it inside the safe!

User Guide

Waterproof Fire Safe

Package Includes;

Please carefully check the above list to conﬁrm all items have been received.

If any items are missing, please contact Consumer Assistance. (see page 10 for contact information).

1 - Waterproof Fire Safe

1 - Operation Manual

2 - Override Access Keys

1 - Mounting Kit

1 - Removable Shelf

4 - Shelf Clips

Model 2901

1Waterproof Fire Safe

ENGLISH

1Operation

Manual

1Mounting

Hardware 4 - Shelf Clips

2 - Override

Access Keys

1 - Removable

Shelf

DO NOT RETURN SAFE TO STORE

If you are missing parts or have difﬁculty operating your safe, please contact our

Consumer Assistance Department by telephone. Store will not accept returned products

without prior authorization. You must ﬁrst contact our Consumer Assistance Department

(See page 10 for contact information).

Please go to the following webpage to register your product:

www.hymaninc.com/product-registration/

Safe Serial #

Located on the bottom right corner of the safe door frame (Figure 1).

Override Access Key #

Engraved on the Head of the key (Figure 2).

Cylinder #

Engraved on the lock cylinder (Figures 3).

Safe Model #

Safe Serial #

Override Access Key #

User Code

LOCATING SAFE IDENTIFICATION NUMBERS

PRODUCT REGISTRATION

SAFE IDENTIFICATION RECORD

Figure 1 Figure 2 Figure 3

WELCOME ......................................................................................PAGE 1

PROPER SAFE USE .......................................................................PAGE 1

CARE AND MAINTENANCE .........................................................PAGE 1

INTERIOR MOISTURE WARNING ...............................................PAGE 2

GETTING STARTED.........................................................................PAGE 2

INSTALL BATTERIES .....................................................................PAGE 2

TESTING DIGITAL LOCK ..............................................................PAGE 3

PROGRAMMING NEW USER CODE ..........................................PAGE 3

TESTING NEW USER CODE ........................................................PAGE 3

LOCKING AND UNLOCKING .......................................................PAGE 4

ANCHORING SAFE TO A FLOOR.................................................PAGE 5

SECURE LOCKOUT PERIOD .......................................................PAGE 7

LOST OR FORGOTTEN USER CODES .......................................PAGE 7

OVERRIDE ACCESS KEY ................................................................PAGE 7

REMOVABLE SHELF .......................................................................PAGE 7

ORDERING ADDITIONAL OVERRIDE ACCESS KEYS .............PAGE 8

LOCATING SAFE IDENTIFICATION NUMBERS .......................PAGE 8

CONSUMER ASSISTANCE ..........................................................PAGE 10

WARRANTY ....................................................................................PAGE 11

INDEX

PROPER SAFE USE

CARE AND MAINTENANCE

Your Honeywell Waterproof Fire Safe will provide years of safe and secure protection for

your valuables, important documents and other personal items. All Honeywell safes are

designed and built using the highest manufacturing standards to ensure maximum user

satisfaction under a variety of conditions. With proper care, your Honeywell safe will provide

“Peace of Mind” for many years to come.

Thank you and enjoy!

WELCOME

Honeywell Waterproof Fire Safes are designed to protect paper documents and ﬁles from

heat and moisture damage due to exposure to ﬁre and water.

Fire Protection

Independent testing veriﬁed the interior temperature remains below 350º F (177ºC) for

thirty minutes when outside temperature is up to 1550ºF (843ºC).

Water Protection

Independent testing veriﬁed that the interior remains dry when completely submerged

for up to 8 hours with up to 50mm of water above the safe.

IMPORTANT: Before using your new safe, it should be opened and aired out for at

least 30 minutes to allow the waterproof seal to decompress and perform as intended.

WARNING: This safe is not intended for the storage of medications, pearls, ﬁrearms,

ammunition, or combustible items of any kind.

When properly maintained, your safe will continue to operate for many years. In order to

ensure optimum performance of your safe, please follow these simple precautions:

CLEAN HANDS - Never attempt to operate the digital keypad if your hands have

excessive dirt, debris or liquids on them.

CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild

cleaner (e.g., window cleaner) to avoid scratching or discoloring the surface. Always wipe

dry and NEVER use abrasive cleansers on the safe or digital keypad.

MOISTURE – We recommend that you place delicate items such as pictures or

documents and valuable possessions into an air-tight container before storing them in

your safe. Avoid placing your safe in areas of high humidity. For optimum performance,

the safe should be opened and aired out for at least 30 minutes every two weeks.

INTERIOR MOISTURE WARNING

IMPORTANT: For optimum performance, Waterproof Fire Safes should be opened and aired

out for at least 30 minutes every two weeks to prevent any build up of moisture inside. It is

recommended to occasionally do this for longer periods. This will balance the humidity difference

inside and outside and allow any excess moisture trapped inside to escape. If you do not open

Waterproof Fire Safes on a regular basis to let them air out, you may begin to notice a musty

smell, especially on paperwork. The manufacturer will not be responsible for any damage or loss of

items placed in Waterproof Fire Safes due to moisture. Proper care and preventative maintenance

of Waterproof Fire Safes is the owner’s responsibility. The owner should understand that this is

required to assure continued levels of protection and trouble-free performance during the lifetime.

Figure 1 Figure 2 Figure 3 Figure 4 Figure 5

The batteries must be installed before using your safe. The battery compartment is inside the safe

and opened by lifting the tab located at the bottom.

1. Remove battery compartment cover (Figure 1).

2. Insert 4 “AA” batteries. Make sure that the batteries are installed in the correct direction (+ and -)

with regard to polarity (Figure 2).

3. Replace the battery cover (Figure 3).

4. Leave the door open and proceed to the “Testing Digital Lock” section on next page.

INSTALL BATTERIES

Figure 1 Figure 2 Figure 3

GETTING STARTED

1. Slide the override key cover up (Figure 1).

2. Insert the override access key into the lock (Figure 2).

3. With the key inserted, turn clockwise to the right (Figure 3).

4. Turn handle to the right and pull safe door open (Figure 4).

5. Turn key counterclockwise to return to locked position (Figure 5).

6. Remove override access key and store it in a safe place away from the safe. Replace the

cover over the key lock, leave safe door open, and proceed to “Install Batteries”.

IMPORTANT: IF YOU DO NOT RETURN THE KEY TO THE LOCKED POSITION THE

SAFE WILL REMAIN UNLOCKED (FIGURE 5)

1. With the door open, press and hold the lock release button on the inside edge of the safe door (Figure 1).

2. While holding the lock release button, turn the handle to the left, to place the bolts in the locked

position (Figure 2).

3. Enter the preset factory code 159 followed by the *key (Figure 3).

4. If the code is entered correctly, the LED will turn green (Figure 4).

5. You have 5 seconds to turn the handle to the right to retract the bolt into the unlock position

(Figure 5).

6. Press and hold the lock release button and turn handle to the left to put the bolts in the locked

position.

7. Leave the door open and proceed to the “Programming New User Code” section below.

PROGRAMMING NEW USER CODE

TESTING DIGITAL LOCK

Figure 2

Figure 3

Figure 4

Figure 5

1. Locate and press the red programming button on the inside of the door (Figure 1).

2. After you have pressed the red programming button, the LED will ﬂash orange (Figure 2).

3. Enter your new 3 to 8 digit personal passcode followed by the *key (Figure 3.).

4. Immediately reenter the new passcode and press the *key to conﬁrm.

5. If both passcodes match, the LED will turn green and the new passcode is set (Figure 4).

6. If both passcodes do not match, the LED will ﬂash red and revert to the original code (Figure 5).

7. Leave door open.

TESTING NEW USER CODE

1. With the door open and in the locked position(Figure 1) , enter the new personal passcode

followed by the *key (Figure 2).

2. If the new code is entered correctly, the LED will turn green (Figure 3).

3. You have 5 seconds to turn the handle to the right to retract the bolt into the unlock position (Figure 4).

Green LED

Figure 2 Figure 3 Figure 4 Figure 5Figure 1

Green LED

Orange LED Red LED

Figure 1

LOCKING THE SAFE

UNLOCKING THE SAFE

Figure 1 Figure 2

1. Close the safe door (Figure 1).

2. Turn the handle to the left, to place the bolts in the locked position (Figure 2).

3. Safe will automatically lock after 5 seconds.

3. Check to ensure safe is locked by attempting to turn the handle to the unlocked position.

IMPORTANT: IF YOU DO NOT RETURN THE KEY TO THE LOCKED POSITION THE

SAFE WILL REMAIN UNLOCKED

1. In the locked position(Figure 1) , enter the personal passcode followed by the *key (Figure 2).

2. If the new code is entered correctly, the LED will turn green (Figure 3).

3. You have 5 seconds to turn the handle to the right to retract the bolt into the unlock position (Figure 4).

4. You may also use the included Override Access key to unlock the safe. (see page 7).

Figure 1 Figure 4Figure 3

Green LED

Figure 2

PREPARE FLOOR FOR ANCHORING

ANCHORING SAFE TO FLOOR

1. Select a suitable and convenient location for your safe.

2. Empty the safe, tilt the safe onto its back side and open the safe Door.

3. Lift the Mounting Hole Cap out of the safe and set aside (Figure 1).

4. Stick a screwdriver into the hole to punch-out the bottom hole cover plug (Figure 2).

NOTE: Set the Mounting Hole Cap aside and replace after the Safe has been mounted.

4. Turn safe back onto its feet and place your safe in the desired location for mounting,

5. Mark the drilling point on the ﬂoor surface with a pen or pencil through the hole (Figure 3).

6. Move the safe aside to clear the marked spot for drilling and proceed to page 6.

NOTE: If the ﬂoor is carpeted, cut a hole in the carpet at least 1” around the carpet to expose

the wood or concrete ﬂoor that you will be drilling.

You may bolt your safe to the ﬂoor for added theft protection and resistance to tipping. Your

safe has a bolt-down hole in the ﬂoor panel and mounting hardware is provided for securing to

ﬂoors. .

NOTE: Bolting/unbolting of the unit is at the consumer’s expense and discretion. LH Licensed

Products, Inc. is not responsible for any costs incurred if the unit has to be replaced. If you have

any questions about mounting the safe, please check with your local home center/hardware

retailer or independent contractor.

3/8” (9.5mm) x 13/4” (45mm)

Hex Head Bolt – 1 ea.

3/8” (9.5mm) x 19/16” (40mm)

Drop-in Anchor – 1 ea.

Hex Head Wood Lag Bolt

3/8” (9.5mm) x 21/2” (64mm)

Mounting Hardware Includes:

Tools Required for Anchoring to Concrete:

• Phillips Screwdriver

• Pen or Pencil

• Drill

• Hammer

• 1/2” Concrete Drill Bit

• 9/16” Socket Wrench

Tools Required for Anchoring to Wood:

• Phillips Screwdriver

• Pen or Pencil

• Drill

• 1/4” Wood Drill Bit

• 9/16” Socket Wrench

Figure 1 Figure 2 Figure 3

ANCHORING SAFE TO A CONCRETE FLOOR

1. Use a 1/2” Concrete Drill Bit drill a hole in the ﬂoor with a depth of 15/8” (Figures 1 & 2).

IMPORTANT: Hole must be 15/8” deep (minimum) to properly insert the Drop-in Anchor, and

no deeper than 13/4” to keep the anchor in position for the Hex Head Bolt (Figure 2).

2. Remove any excess dust from the hole.

3. Insert the Drop-in Anchor into the hole (slotted side down) and tap into place using a hammer

until even with the ﬂoor surface (Figure 3).

4. Secure Drop-in Anchor by inserting an anchor punch or Phillips head screwdriver into the Drop-

in Anchor and hammering to lock into place and prevent it from turning when mounting the safe (Figure 4).

5. Place the safe back into position lined up over the hole (Figure 5).

6. Insert the supplied Hex Head Bolt through the bolt-hole from the inside of the safe and into

the Drop-in Anchor (Figure 6).

7. Secure the Hex Head Bolt tightly using a socket wrench (Figure 7).

8. Replace the Mounting Hole Cap and press ﬁrmly into place (Figure 8).

Figure 5

Figure 1

Figure 8

Figure 4Figure 3

Figure 6

Figure 2

ANCHORING SAFE TO A WOOD FLOOR

1. Use a 1/4” Wood Drill Bit to drill a hole in the ﬂoor with a depth of 11/2” (Figure 1).

2. Place the safe back into position lined up over the hole (Figure 2).

3. Insert a Wood Lag Bolt through the bolt-down hole from the inside of the safe and into the

ﬂoor hole (Figure 3).

4. Secure the Wood Lag Bolt tightly using a 9/16” socket wrench (Figure 4).

5. Replace the Mounting Hole Cap and press ﬁrmly into place.(Figure 5).

Figure 1 Figure 2 Figure 3 Figure 4 Figure 5

Figure 7

SECURE LOCKOUT PERIOD

If the wrong user code is entered 3 consecutive times in a row, the keypad will automatically lockout

and will not be able to open the safe with the keypad for 15 minutes. During this period, the safe can be

opened and locked with the Override Access key.

LOST OR FORGOTTEN USER CODES

If the user code is lost or forgotten, you may open the safe using the Override Access key and use the

red reset button to reprogram the 38 digit user code. The instructions for opening the safe with the

override access key are located below.

OVERRIDE ACCESS KEY

INSTALLING REMOVABLE SHELF

Your safe is equipped with an Override Access key which allows immediate access in case you

forget your user codes or the batteries need to be installed or replaced.

Figure 1 Figure 2 Figure 3

1. Slide the override key cover up (Figure 1).

2. Insert the Override Access key into the lock (Figure 2).

3. With the key inserted turn clockwise to the right (Figure 3).

4. Turn handle to the right and pull safe door open (Figure 4).

5. Turn key counterclockwise to return to locked position (Figure 5).

6. Remove override access key and store it in a safe place away from the safe. Replace the

cover over the key lock.

IMPORTANT: IF YOU DO NOT RETURN THE KEY TO THE LOCKED POSITION THE

SAFE WILL REMAIN UNLOCKED (FIGURE 5)

1. Insert Shelf Clips into the recesses on the inside of the safe on the same level (Figure 1).

2. Place removable shelf on clips (Figure 2).

3. Gently press down on shelf until level and secure (Figure 3).

Figure 1 Figure 2 Figure 3 Figure 4 Figure 5

Inhaltsverzeichnis

Andere Honeywell Sicher Handbücher

Honeywell

Honeywell 5101 Bedienungsanleitung

Honeywell

Honeywell 5911 Bedienungsanleitung

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Anleitung zur Verwendung

Honeywell

Honeywell 5805 Bedienungsanleitung

Honeywell

Honeywell 5103 Bedienungsanleitung

Honeywell

Honeywell 5005 Anleitung zur Verwendung

Honeywell

Honeywell 1114 Bedienungsanleitung

Honeywell

Honeywell 5410 Anleitung zur Verwendung

Honeywell

Honeywell 3518 Bedienungsanleitung

Honeywell

Honeywell 5005B Bedienungsanleitung

Honeywell

Honeywell 2911 Bedienungsanleitung

Honeywell

Honeywell 2208 Bedienungsanleitung

Honeywell

Honeywell 2111 Bedienungsanleitung

Honeywell

Honeywell 2605 Anleitung zur Verwendung

Honeywell

Honeywell 5911 Bedienungsanleitung

Honeywell

Honeywell 5912 Bedienungsanleitung

Honeywell

Honeywell 5101 Bedienungsanleitung

Honeywell

Honeywell 2054D - 1 Hour Steel Fire Safe Anleitung zur Verwendung

Honeywell

Honeywell 1532 Bedienungsanleitung

Honeywell

Honeywell 2050 Bedienungsanleitung

Honeywell

Honeywell 3035D Anleitung zur Verwendung

Honeywell

Honeywell 2512 Bedienungsanleitung

Honeywell

Honeywell 2116 Bedienungsanleitung

Honeywell

Honeywell 5301DOJ Bedienungsanleitung

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Phoenix

Phoenix FS0352C Produktinformationsblatt

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

Phoenix

Phoenix FS1280F Bedienungsanleitung

Phoenix

Phoenix SS0992K Produktinformationsblatt

Technomax

Technomax Trony Series Handbuch

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Phoenix

Phoenix SS0100E Produktinformationsblatt

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung

Ankaro

Ankaro ANK EZ I Bedienungsanleitung

Phoenix

Phoenix FS1270E Series Bedienungsanleitung