Honeywell Voyager 1452g Series Bedienungsanleitung

Voyager™ 1452g Series
Cordless Area-Imaging Scanner
Quick Start Guide
VG1452-QS Rev A 
11/14
Aller à www.honeywellaidc.com pour le français. 
Vai a www.honeywellaidc.com per l'italiano. 
Gehe zu www.honeywellaidc.com für Deutsch. 
Ir a www.honeywellaidc.com para español. 
Para Português, acesse www.honeywellaidc.com.br. 
Перейти на русскоязычный сайт www.honeywellaidc.com. 
Pro češtinu jdi na www.honeywellaidc.com. 
Pre slovenčinu choďna www.honeywellaidc.com 
日本語 :  www.honeywellaidc.com をご覧ください。
中文 （简体），请访问 :www.honeywellaidc.com。
中文 （繁体），请访问 :www.honeywellaidc.com。
한글 www.honeywellaidc.com 로이동합니다 .

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.honeywellaidc.com.

Getting Started

Turn off the computer’s power before connecting the base, then

power up the computer once the base is fully connected. When the

base is connected and powered up, put the scanner in the base to

establish a link. The green LED on the base flashes to indicate the

scanner’s battery is charging.

Power Supply Assembly (if included)

Note: The power supply must be ordered separately, if needed.

USB Connection:

Keyboard Wedge Connection:

RS232 Serial Port Connection:

RS485 Connection:

Reading Techniques

The view finder projects an aiming

beam that should be centered over

the bar code, but it can be

positioned in any direction for a

good read.

Hold the scanner over the bar code,

pull the trigger, and center the

aiming beam on the bar code.

The aiming beam is smaller when

the scanner is closer to the code and larger when it is farther from the

code. Hold the scanner close to smaller bar codes, and farther away

from large bar codes to get a proper read.

If the bar code is highly reflective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Note: If the scanner razzes when scanning a bar code, the link has

not been established. If the scanner beeps once, the link has

been established.

Standard Product Defaults

The following bar code resets all standard product default settings.

Standard Product Defaults

Note: PDF and 2D bar codes can only be read by Voyager model

1452g2D and cannot be read by model 1452g1D.

RS485 Interface

The RS485 interface defaults to port 5B. If you have an IBM POS

terminal using port 9B, scan the appropriate code below to program

the terminal, then power cycle the cash register.

IBM Port 9B HHBCR-1

Interface

IBM Port 9B HHBCR-2

Interface

Note: For additional RS485 interface selections, see the User’s

Guide for your product at our website,

www.honeywellaidc.com.

USB Serial

Scan the following code to program the scanner to emulate a regular

RS232-based COM Port. If you are using a Microsoft® Windows®

PC, you will need to download a driver from the Honeywell website

(www.honeywellaidc.com). The driver will use the next available

COM Port number. Apple® Macintosh computers recognize the

scanner as a USB CDC class device and automatically use a class

driver.

USB Serial

Note: No extra configuration (e.g., baud rate) is necessary.

USB PC Keyboard

Scan the following code to program the scanner for a USB PC

Keyboard.

USB PC Keyboard

Keyboard Country

Scan the Program Keyboard Country bar code below, then scan

the numeric bar code(s) from page 13, then the Save bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Program Keyboard Country

Country Code Scan Country Code Scan

Belgium 1Italy 5

Denmark 8Norway 9

Finland 2Spain 10

France 3Switzerland 6

Germany/Austria 4USA (Default) 0

Great Britain 7

Save

Note: For a complete list of country codes, see the User’s Guide for

your product at our website, www.honeywellaidc.com.

Locked Link

If you link a scanner to a base using the Locked Link Mode, other

scanners are blocked from being linked if they are inadvertently

placed into the base. If you do place a different scanner into the

base, it will charge the scanner, but the scanner will not be linked.

Locked Link Mode

(Single Scanner)

To use a different scanner, you need to unlink the original scanner by

scanning the Unlink Scanner bar code.

Override Locked Scanner

If you need to replace a broken or lost scanner that is linked to a

base, scan the Override Locked Scanner bar code with a new

scanner, and place that scanner in the base. The locked link will be

overridden; the broken or lost scanner’s link with the base will be

removed, and the new scanner will be linked.

Override Locked Scanner

Unlinking the Scanner

If the base has a scanner linked to it, that scanner must be unlinked

before a new scanner can be linked. Once the previous scanner is

unlinked, it will no longer communicate with the base. Scan the

Unlink Scanner bar code to unlink a scanner.

Unlink Scanner

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the trigger to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Manual Trigger - Normal

(Default)

Presentation Mode

Suffix

If you want a carriage return after the bar code, scan the Add CR

Suffix bar code. To add a tab after the bar code, scan the Add Tab

Suffix bar code. Otherwise, scan the Remove Suffix bar code to

remove the suffixes.

Add CR Suffix

Remove Suffix

Add Tab Suffix

Add Code ID Prefix to all Symbologies

Scan the following bar code if you wish to add a Code ID prefix to all

symbologies at once.

Add Code ID Prefix To All Symbologies

(Temporary)

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website, www.honeywellaidc.com.

Andere Handbücher für Voyager 1452g Series

Inhaltsverzeichnis

Andere Honeywell Scanner Handbücher

Honeywell

Honeywell 4022 Benutzerhandbuch

Honeywell

Honeywell Voyager 1400g Series Bedienungsanleitung

Honeywell

Honeywell 7120 Orbit Bedienungsanleitung

Honeywell

Honeywell Vuquest 3330g Bedienungsanleitung

Honeywell

Honeywell 8670 Bedienungsanleitung

Honeywell

Honeywell 1602-B Bedienungsanleitung

Honeywell

Honeywell XENON 1900 Bedienungsanleitung

Honeywell

Honeywell Granit 1910i Bedienungsanleitung

Honeywell

Honeywell Vuquest 3330g Bedienungsanleitung

Honeywell

Honeywell Granit 1280i Bedienungsanleitung

Honeywell

Honeywell A700 Bedienungsanleitung

Honeywell

Honeywell Voyager 1450g Series Bedienungsanleitung

Honeywell

Honeywell Vuquest 3330g Bedienungsanleitung

Honeywell

Honeywell HH480 Bedienungsanleitung

Honeywell

Honeywell 4022 Benutzerhandbuch

Honeywell

Honeywell Voyager XP 1470g Series Bedienungsanleitung

Honeywell

Honeywell Xenon XP 1952g Bedienungsanleitung

Honeywell

Honeywell HF680 Bedienungsanleitung

Honeywell

Honeywell Eclipse 90 Bedienungsanleitung

Honeywell

Honeywell 4850DR Bedienungsanleitung

Honeywell

Honeywell VOYAGER 1250G Bedienungsanleitung

Honeywell

Honeywell IS4920 Bedienungsanleitung

Honeywell

Honeywell QuantumT MS3580 Bedienungsanleitung

Honeywell

Honeywell HF680 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung