Honeywell Galaxy Keyprox Technische Daten

Galaxy

Keyprox

Installation and Programming Instructions

Honeywell Security

Contents

Overview.......................................................................................................................................... 3

Compatibility ................................................................................................................................... 3

Mounting.......................................................................................................................................... 3

Wiring............................................................................................................................................... 3

Configuration .................................................................................................................................. 3

Volume Control ............................................................................................................................... 4

Keypad Programming .................................................................................................................... 4

MAX Programming ......................................................................................................................... 4

Card Programming ......................................................................................................................... 4

Card Self-Learn Procedure ............................................................................................................ 4

Operation......................................................................................................................................... 5

Dual Focus ................................................................................................................................... 5

Card Reader Buzzer Indications .................................................................................................. 5

Door Control Programming ........................................................................................................... 6

Specifications ................................................................................................................................. 7

EN50131 Compliance ..................................................................................................................... 7

Declaration of Conformity ............................................................................................................. 8

Overview

The Galaxy Keyprox is a standard Galaxy MK7 keypad and a proximity card reader, combined

into one housing. This allows dual function setting/unsetting ability from the one station without

the need for a separate card reader. It is primarily intended for use in situations where a PIN

and/or card are needed to set and unset the intruder alarm system. It is not intended to be used

for door control as it does not contain a door strike relay. However, limited door functions can

be programmed using Links programming in the Galaxy control panels.

Compatibility

The Galaxy Keyprox is intended for use with the Galaxy 8, 18, 60, 128, 500, 504 and 512

panels. The panels must be fitted with software version 1.18 or later. The Keyprox is also used

with the Galaxy 2 and 3 Series panels.

Most standard ASK cards with 26 and 34 Bit formats can be read by the Keyprox. Proprietary

card type may not be read properly by the Keyprox.

* Note that some versions of the keypad may have the HID functionality enabled. Keyprox

units with the -H suffix have the HID functionality.

MAX cards or tags can be read by the Keyprox. However if MAX or MicroMAX readers are

also used on the system, then the cards will need to be programmed on to two separate users, as

they are seen in a different way by the MAX type readers and the Keyprox.

Mounting

The Keyprox should be mounted on a flat vertical surface in a convenient location. Separate the

back plate from the rest of the keypad by gently pushing on the two locking clips on the base of

the Keyprox with a screwdriver. Place the back plate on the wall at the desired location and

mark the position of the screw holes. Remove the plate then drill the holes as required. The back

plate can then be screwed to the wall while running the cable connection through the available

opening. Once the back plate has been secured to the wall, the rest of the Keyprox can be

clipped in place by locating the top lugs first, then pushing the lower clips home, gently but

firmly. If required, the supplied prox-card sticker can be applied to the lower right corner of the

Keyprox front or door for identification.

Wiring

The Keyprox must be wired to the RS485 data bus on the Galaxy panel, maintaining the parallel

daisy chain wiring configuration. Only 4 connections are required, +12V, 0V, A and B data. If

the Keyprox is the last module on the A B RS485 data bus, then a 680 ohm end-of-line resistor

must be fitted across the A and B terminals.

Configuration

The following set-up is required before the Keyprox can be used with the Galaxy system:

Before powering the Keyprox, set the address using the rotary switch on the PCB. This sets the

address for both the keypad and card reader parts of the Keyprox, so the address must be chosen

carefully. The address must be a valid one for both a keypad and a MAX reader on that line, as

shown in the table. Also, the address must not clash with any other keypad, MicroMAX reader,

RF RIO MAX address or Keyprox connected to the same line.

Panel 8 18 60 128 500 504, 512 G2 G3

Line 1 0,1 0,1,2 0,1,2,3 0,1,2 0,1,2 0,1,2 0,1,2,3 0,1,2

Line 2 - - - 0,1,2,3 0,1,2,3 0 - 6 - 0 - 6

Line 3 - - - - 0,1,2,3 0 - 6 - 0 - 6

Line 4 - - - - 0,1,2,3 0 - 6 - 0 - 6

After the unit is powered up, MAX mode on the Galaxy panel must be enabled (if this has not

already been done). This is done in engineers mode, menu 63.2.1.

NOTE: MAX mode is not applicable to Galaxy 2 Series panels.

If the keypad and MicroMAX sections of the Keyprox have not already configured themselves

onto the system, bring the panel out of engineers mode to do so. After exiting engineer mode,

the keypad will indicate ‘1 MOD ADDED’ and show the address of the MAX.

Volume Control

The Keyprox part number CP038 has a volume control pot marked VOL at the bottom right-

hand corner of the pcb. To adjust the volume open up the keypad cover and adjust the pot

(+ or -).

Keypad Programming

The keypad side of the Keyprox requires no programming for most installations. If required, the

parameters for the keypad can be altered in programming menu 58.

MAX Programming

The parameters for the MAX side of the Keyprox can be altered in programming menu 63.2.3.

NOTE: MAX programming is not applicable to Galaxy 2 Series panels.

Card Programming

In order for the card reader to operate, the unique serial number programmed into each card to

be used must be programmed to a separate user on the Galaxy panel. This can be simplified by

using the self-learn procedure described below. The MAX card-held function also needs to be

programmed here, to allow the card to set and unset the system. Refer to the relevant sections in

the Galaxy Panel user or installation manuals for full details. (menu 42 - codes.)

Card Self-Learn Procedure

Many proximity cards have no serial numbers printed on them, and some cards, such as MAX

tags, have encrypted numbers. However, the card number must be programmed into the Galaxy

panel to allow the card to work. To cater for this programming process, a card self-learn

procedure has been included in the Keyprox. (This must be used for MAX tags)

NOTE: The card self-learn procedure should only be used whilst the Keyprox is in the user

menu for entering the MAX card number and the panel is waiting for the actual card number to

be entered. Use of the self-learn at other times will result in random operations.

Procedure

1. Use the Keyprox to enter menu option 42.1. Select the user to which the card is to be

assigned. Within the user menu, select option 7=MAX Number.

2. Delete all the digits of the existing number using the B< button.

3. Place the keypad in the self-learn mode by holding the A button down and pressing the 1

button simultaneously. The keypad will give a double beep to indicate entry into the self-

learn mode.

4. Within 5 seconds of the double beep, present the new card at the Keyprox.

5. The card number will appear on the keypad display, followed by a single beep.

6. Press ENT to save the card number.

7. To allow the card to set and unset the system via the Keyprox, option 8=MAX Function

(Card-Held) must be programmed with a setting option (e.g. 12=Timed Set).

8. To enter more cards, repeat the procedure for other users.

NOTE: The self-learn mode will time out after 5 seconds if no card is presented.

During the self-learn mode operation, the keypad buttons will not function.

Operation

The Keyprox will behave as two separate modules. The keypad section will function as a

standard Galaxy Keypad, for setting/unsetting, programming and general operation.

The proximity card reader section operates in a similar way to a Galaxy MicroMAX reader.

Swiping a card in front of the read head in the lower right hand corner of the keypad will be

seen as a valid card read by the panel. This can be utilised, if required, by using Links on the

Galaxy Panel. To perform the card-held function assigned to card user, the card must be held in

front of the read head for at least 3 seconds. A long beep will be heard from the keypad buzzer

to indicate that the card is valid. A long beep will be heard 3 seconds later and the card-held

function will be performed.

Dual Focus

Dual Focus means that the PIN and the Card belonging to the same user must be used together

to access the system. This is typically used as a secure method of setting and unsetting the

system. To achieve this, assign a # to the PIN of the user and to the MAX number. Assign an

appropriate MAX function, for example, 12=Timed set. To set the system now, a user would

have to enter their PIN, then hold the card in front of the reader for 3 seconds to begin setting

the system. To unset, simply enter the PIN then briefly swipe the card in front of the reader.

Card Reader Buzzer Indications

Event Buzzer indication

Card number read by reader Short beep

Card number validated Long Beep

Card Held function activated Double Beep

Door Control Programming

Door control functionality can be achieved by setting up zones, outputs and links on the

Galaxy panel as shown in the example below.

Zone 1011 is programmed as a Security zone.

Zone 1012 is programmed as a Link zone.

Output 1011 is programmed as Link-A type, mode=pulse 5 Sec.

Output 1021 is programmed as Link-B (door open time out), pulse 15 Sec.

Keyprox is on address 00 (MAX 10)

Program the following links:

1. Source MAX 10 Destination Link-A

2. Source MAX 10 Destination Link-B

3. Source #1012 Destination Zone 1011

4. Source Zone 1012 Destination Link-A

5. Source Zone 1012 Destination Link-B

This will program the door to unlock for 5 seconds and allow it to stay open for 15 seconds from

whenever a valid card is swiped at the Keyprox. Zone 1012 is programmed as an Egress button,

which will open the door in the same way as a valid card swipe.

If the door is forced, a standard zone alarm will occur. It will not be recorded as a MAX alarm

in the Access log (menu 25).

Specifications

Dimensions 148 x 90 x 31mm

Weight 225g

Operating Temp -10oC to 40oC*

Proximity Reader 125kHz, Inductive

Read range 15mm nominal, dependent on card type.

Current Draw Typical, 90mA

Maximum, 140mA

*NOTE: The display may not operate correctly at temperatures below 0oC. However the

Keyprox will still continue to operate on the system. When the temperature rises above 0oC

again, the display will return to normal.

EN50131 Compliance

This product is suitable for use in systems designed to comply with PD6662:2004 and

prEN50131-1:2004

Security Grade - 3

Environmental Class – II

This product is suitable for use in systems designed to comply with EN50131-1:1997

Security Grade - 2

Environmental Class – II

Declaration of Conformity

Hereby, Honeywell Security declares that the Galaxy Keyprox card reader and

keypad is in compliance with the essential requirements and other relevant provisions

of Directive 1999/5/EC.

This device is intended for use in the following countries:

Austria Belgium Denmark Finland

France Germany Iceland Ireland

Italy Luxembourg Netherlands Norway

Portugal Spain Sweden Switzerland

United Kingdom

Honeywell Security

2 Redwood Crescent

Peel Park Campus

East Kilbride

G74 5PA

II1-0029 Rev 1.6 © Copyright Honeywell Security

Inhaltsverzeichnis

Andere Honeywell Sicherheitssystem Handbücher

Honeywell

Honeywell LYNXRPK-2 - Wireless Self-Contained Security Syste - LYNXRPK-2 - Wireless Self-Contained Security... Montageanleitung

Honeywell

Honeywell RCWL200A Bedienungsanleitung

Honeywell

Honeywell Accenta Kurzanleitung

Honeywell

Honeywell Friedland HISK1 Bedienungsanleitung

Honeywell

Honeywell ADEMCO VISTA SERIES Montageanleitung

Honeywell

Honeywell 032211.17 Bedienungsanleitung

Honeywell

Honeywell ADEMCO VISTA-10P Betriebsanleitung

Honeywell

Honeywell Gamewell FCI E3 Series Bedienungsanleitung

Honeywell

Honeywell VISTA-15P Bedienungsanleitung

Honeywell

Honeywell VISTA-128BP Bedienungsanleitung

Honeywell

Honeywell X-618 Kurzanleitung

Honeywell

Honeywell Lyric SIXSIREN Bedienungsanleitung

Honeywell

Honeywell Ademco VISTA-32FB Bedienungsanleitung

Honeywell

Honeywell Friedland HISK1 Bedienungsanleitung

Honeywell

Honeywell INTELLIGUARD 9000 Bedienungsanleitung

Honeywell

Honeywell LYNX Touch L7000 Series Bedienungsanleitung

Honeywell

Honeywell Ademco VISTA-20P Bedienungsanleitung

Honeywell

Honeywell ADEMCO VISTA-120 Montageanleitung

Honeywell

Honeywell NOTIFIER DSE3-23 Series Bedienungsanleitung

Honeywell

Honeywell WAVE2EX - Ademco Two Tone Siren Montageanleitung

Honeywell

Honeywell AlarmNet 7845GSM Bedienungsanleitung

Honeywell

Honeywell RAPID EYE K9696V2 Bedienungsanleitung

Honeywell

Honeywell LXL-1000 Bedienungsanleitung

Honeywell

Honeywell Ademco VISTA-20P Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung