Honeywell HP ProLiant DL360P Gen8 Bedienungsanleitung

HP ProLiant DL360P Gen8 Server Planning Installation

Service Guide

HWDOC-X330-G

August 2020

Disclaimer

This document contains Honeywell proprietary information. Information contained herein is to be used

solely for the purpose submitted, and no part of this document or its contents shall be reproduced,

published, or disclosed to a third party without the express permission of Honeywell International Sàrl.

While this information is presented in good faith and believed to be accurate, Honeywell disclaims the

implied warranties of merchantability and fitness for a purpose and makes no express warranties

except as may be stated in its written agreement with and for its customer.

In no event is Honeywell liable to anyone for any direct, special, or consequential damages. The

information and specifications in this document are subject to change without notice.

- 2 -

Contents 3

Chapter 1 - About this Document 6

Chapter 2 - Planning 9

2.1 Overview 9

2.1.1 Software requirements 10

2.1.2 BIOS configuration 10

2.2 Description 10

2.2.1 Honeywell server model number 10

2.2.2 Equipment configuration 11

2.2.3 Electronics module 11

2.2.4 Standard features of HP ProLiant DL360p Gen8 server 12

2.3 Platform information 13

2.4 Slots configuration 14

2.4.1 Slot configuration for Experion node setup 14

2.4.2 Slots configuration 14

2.4.3 General Ethernet configuration 15

2.4.4 Cnet configuration using PCIC interface 15

2.5 Memory configuration 16

2.5.1 Standard memory configuration for 4GB using RDIMM 16

2.5.2 Standard memory configuration 17

2.5.3 Maximum memory configuration 17

2.6 System specifications 18

2.6.17 Hard disk drive specifications 22

2.6.18 Removable media specifications 22

2.6.19 Mouse and keyboard 22

2.6.20 Monitor 22

2.6.21 Video cable 23

2.7 Industrial regulatory compliance 23

2.7.1 Electromagnetic Compatibility 23

2.7.2 Safety compliance 24

2.8 Light industrial regulatory compliance 24

2.8.1 Electromagnetic Compatibility 24

2.8.2 Safety compliance 25

Chapter 3 - Installation 26

3.1 Tasks for installing the server 26

- 3 -

3.1.1 Before you begin 26

3.2 Power and grounding requirements 26

3.3 Cabinet spacing requirements 27

3.4 Installing the server and connecting the cables 28

3.4.1 Honeywell server back panel connections 28

3.4.2 Installing the server 28

3.4.3 Connecting the cables 29

3.4.4 Install air duct baffles and blank panel front covers in cabinet 30

3.5 Starting the server 32

3.5.2 Configuring RAID in HP ProLiant DL360p Gen8 server 32

3.5.3 Starting the TDC emulator services 32

3.5.4 Checking the LCNP4e/LCNp4e2 status 33

Chapter 4 - Operation 34

4.1 Server overview 34

4.1.1 Front view 34

4.1.2 Rear view 35

4.2 Network connections 36

4.2.1 Ethernet network 36

4.2.2 LCN network 36

4.2.3 LCN cables 37

4.2.4 LCN connections 37

4.2.5 MAU connection 37

4.2.6 ControlNet Network 38

4.3 Configuring ControlNet interface card 39

Chapter 5 - Servicing 40

5.1 Remove the server from the rack 40

5.2 Removing the access panel 40

5.3 Servicing the LCNP4e/LCNp4e2 41

5.3.1 Replacing the LCNP4e/LCNp4e2 board 42

5.4 Servicing the hard disk drives and power supply 46

5.4.1 Installing hot spare hard drive 46

5.5 Servicing Honeywell options 47

5.5.1 LCN node setup board configuration 48

5.5.2 Slot requirements for general Ethernet and FTE node setup 48

5.5.3 Add additional memory 48

5.5.4 Verifying correct BIOS settings 50

- 4 -

5.5.5 BIOS settings for 51155539-100 50

5.5.6 BIOS settings for 51155539-200 57

5.6 Spare parts 65

- 5 -

ABOUT THIS DOCUMENT

This guide contains planning, installation and service information for the Honeywell-configured HP

Proliant DL360p Generation 8 (Gen8) server. The instructions and service information contained in this

guide addresses the server, and assumes that associated network communication equipment is pre-

installed by the Honeywell factory or has manuals dedicated to its installation and service. This server

is not a standard HP model and you cannot order it independently from HP.

NOTE

If the Local Control Network (LCN) coaxial based system has been integrated with an Experion

Fault Tolerant Ethernet (FTE) based system, the node (server) may be upgraded to be an

Experion Local Control Network (ELCN) node, which has its ELCN Interface provided via FTE.

This node may be installed as a physical or virtual platform.

If the node is upgraded to an ELCN node, and the node is a physical (a.k.a. bare-metal)

platform, a Local Control Network Processor (LCNP) board coaxial interface to LCN is not used.

The LCN MAU is disconnected, and/or the LCNP board is removed.

Redundant ELCN Bridges are required if the ELCN node is communicating with any other

existing, coaxial-based LCN node.

Some LCN nodes may have been replaced by their ELCN equivalent nodes, and overall system

features/architecture will differ from that of a non-ELCN integrated system (classic LCN/TPN

system). In this case it may be necessary to refer to appropriate ELCN documentation, in

addition to the information provided herein.

The following table lists Honeywell ELCN/Experion publications that may be useful for references.

ELCN Reference Documents Table for Server/Workstation PSIG Documents

- 6 -

CHAPTER

Publication Content Type

Experion LCN Hardware

Upgrade Kit Instructions

(51195195-415)

UEA installation

Experion LCN Quick Start

Guide (EPDOC-X480-en-

510A)

General hardware/software/migration information

Experion Software Installation

User's Guide (EPDOC-X136-

en-510A)

Experion software installation (various methods)

Experion LCN Overview and

Implementation Guide

(EPDOC-X478-en-510A)

Bridge hardware installation, software configuration,

operation, servicing/troubleshooting

Experion LCN Planning,

Installation, and Service Guide

(HWDOC-X479-en-E)

ELCN system planning, hardware/software

installation, servicing/troubleshooting

Experion LCN Specification

(ELCN03)

General ELCN technical specifications

Fault Tolerant Ethernet

Installation and Service Guide

(EPDOC-XX36-en510A)

FTE system installation, servicing/troubleshooting

Universal Embedded

Appliance Hardware

Installation and Maintenance

Guide (HWDOC-X469-en-A)

General UEA planning, installation, and service

information before it is commissioned as an ELCN

appliance.

Integrated Experion-TPS

User's Guide (EPDOC-XX66-

en-510A)

Supplementary installation tasks needed before using

TPS Nodes on an Experion system. Describes

configuration tasks needed for TPS Nodes.

Virtualization Planning and

Implementation Guide

(EPDOC-X147-en-A)

Implementing networks, Preparing ESXi host,

Administering virtualization

Server and Client Planning

Guide (EPDOC-X128-en-

510A)

High-level planning/design for Experion servers,

clients, controllers

Process Operations Manual

(SW11-601)

Process operations, alarm/message handling,

reporting, history functions, system operations,

system menu functions, console/station peripheral

devices

- 7 -

Chapter 1 - About this Document

Publication Content Type

Integrated Experion-TPS

User's Guide (EPDOC-XX66-

en-510A)

Supplementary installation and configuration tasks for

Experion TPS Nodes

Experion PKS R510.1

Migration Planning Guide

(EPDOC-XX70-en-5101A)

Planning information for migration of Experion system

from legacy R4xx system software to Experion

R510.1 software.

Switch Configuration Tool

User's Guide

(EPDOC-X246-en-510A)

Experion switch configuration information

Experion Network Best

Practices (WP-07-02-ENG)

Best practices for planning the installation of Experion

FTE networks, and connecting them into plant IT

networks.

Experion R510 Software

Change Notice (EPDOC-

X166-en-510A)

Describes Experion R510 features/enhancements,

overall product, release interoperabilities, system

dependencies, problem resolutions, known issues,

special considerations

Customer Release Guide

R687 (CRG-687)

TPN/TPS Migration information (ELCN migration

Information included)

TPN R687 Software Change

Notice (TNDOC-X166-en-

6871A)

Document changes, compatibility and

migration/installation processes for the TPS Process

Network Release of R687 software.

Experion Control Building

User's Guide (EPDOC-XX19-

en-510A)

Procedures for basic tasks in the Control Builder

application (configuring hardware devices, continuous

control strategies, sequential control strategies).

1.1 Revision history

Version Date Description

August 2020

Initial release

of the

document

- 8 -

PLANNING

lOverview

lDescription

lPlatform information

lSlots configuration

lMemory configuration

lSystem specifications

lIndustrial regulatory compliance

lLight industrial regulatory compliance

2.1 Overview

Platforms sold by Honeywell are engineered for the process control mission of Experion and TPS

systems to provide consistent and robust performance. Through an extensive qualification process,

Honeywell defines specific peripheral devices, slot locations, and BIOS settings for best performance

and reliability, sometimes even adding cooling fans for longer service. Honeywell platforms are then

built to Honeywell specifications by the computer manufacturer.

Honeywell engineering has tested the HP ProLiant DL360p Gen8 server with other Honeywell

hardware and software and has qualified its use for specific configurations as identified in the Software

Change Notice (SCN). This server is not a standard HP model and cannot be ordered independently

from HP. The Technical Assistance Center (TAC) is trained to support Honeywell platforms. Use of any

other server, including a similar HP model, is considered a project special and its TAC support is

limited according to the services policy.

This release of the server is based upon RAID-5 and dual power supply design and provides

computer-based functionality for Experion and TPS systems. For TPS systems and certain Experion

systems configured with Fault Tolerant Ethernet (FTE), the server has an LCNP4e/LCNp4e2 card

installed, which allows connection to the TotalPlant Process Network (TPN) coax through the LCN

Media Access Unit (MAU). Additionally, the server connects to the Ethernet or FTE using the on board

quad NIC.

The peripheral electronics assemblies are based upon either the Peripheral Component Interconnect

Express (PCIe) bus or USB 2.0. All mass storage devices are connected through SATA and PCIe. The

SATA DVDRW drive is connected through the SATA connector on the motherboard. The RAID-5 SAS

controller card is located on server motherboard.

The standard memory of this platform:

lFor 51155539-100 is 4GB (using 1x 4GB ECC RDIMM memory 1600MHz or faster) that can be

upgraded to 8GB (using 2 x 4GB ECC RDIMM memory 1600 MHz or faster).

lFor 51155539-200 is 8GB (using 1x 8GB DDR3 ECC RDIMM memory 1600MHz or faster) that can

be upgraded to 16GB (using 2 x 8GB DDR3 ECC RDIMM memory 1600 MHz or faster).

- 9 -

CHAPTER

Memory devices must be of the same type, size and speed from the same memory supplier. There

cache memory options are not provided for this server.

lSoftware requirements

lBIOS configuration

2.1.1 Software requirements

The HP ProLiant DL360p Gen8 server runs on the following operating systems:

lMicrosoft Windows Server 2008 (32-bit) (R400.x)

lMicrosoft Windows Server 2008 R2 (64-bit) (R410.x, R43x.x)

lMicrosoft Windows Server 2016 (R510.x)

The server platform runs the latest version of Application Processing Platform (APP) node or Experion

Server (ESVT, ESV, ACE/SCE, ACE-T, EAS, eServer, EApp). Refer to the latest

Experion General

Release Software Change Notice

for software applications that have been qualified for use on the HP

ProLiant DL360p Gen8 server platform.

2.1.2 BIOS configuration

All HP ProLiant DL360p Gen8 server platforms must have the BIOS version P71 02/11/2014 or later..

2.2 Description

lHoneywell server model number

lEquipment configuration

lElectronics module

lStorage and media devices

lStandard features of HP ProLiant DL360p Gen8 server

2.2.1 Honeywell server model number

This document applies to the Honeywell server platform identified in the following table.

- 10 -

Chapter 2 - Planning

Inhaltsverzeichnis

Andere Honeywell Server Handbücher

Honeywell

Honeywell Q7055B1047 Bedienungsanleitung

Honeywell

Honeywell Uniformance R300 Bedienungsanleitung

Honeywell

Honeywell XYR3011 Bedienungsanleitung

Honeywell

Honeywell Aquatrol W964F Bedienungsanleitung

Honeywell

Honeywell HAS-QNH Bedienungsanleitung

Honeywell

Honeywell XYR301E Bedienungsanleitung

Honeywell

Honeywell LANSRLU1 Einrichtungshandbuch

Honeywell

Honeywell T320 Technisches Handbuch

Honeywell

Honeywell AutomationServer Bedienungsanleitung

Honeywell

Honeywell HUS-D4-E-Pro Bedienungsanleitung

Honeywell

Honeywell MZ-PCSV74 Technisches Handbuch

Honeywell

Honeywell T610 Technisches Handbuch

Honeywell

Honeywell PE SC1430 Technisches Handbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung