Honeywell T320 Technisches Handbuch

T320 Honeywell Server Planning, Installation and Service

Guide

HWDOC-X239-en-I

August 2020

Disclaimer

This document contains Honeywell proprietary information. Information contained herein is to be used

solely for the purpose submitted, and no part of this document or its contents shall be reproduced,

published, or disclosed to a third party without the express permission of Honeywell International Sàrl.

While this information is presented in good faith and believed to be accurate, Honeywell disclaims the

implied warranties of merchantability and fitness for a purpose and makes no express warranties

except as may be stated in its written agreement with and for its customer.

In no event is Honeywell liable to anyone for any direct, special, or consequential damages. The

information and specifications in this document are subject to change without notice.

- 2 -

Contents 3

Chapter 1 - About this Document 7

1.1 Revision history 9

Chapter 2 - Planning 10

2.1 Overview 10

2.1.1 Software requirement 11

2.1.2 BIOS configuration 11

2.2 Description 11

2.2.1 Honeywell server model number 12

2.2.2 Electronics configuration 12

2.2.3 Electronics module 12

2.2.4 Standard features of Dell T320 13

2.2.5 Slots configuration 14

2.2.6 Optional features 14

2.2.7 Power cords 15

2.3 Platform information 15

2.3.1 Honeywell documentation 15

2.3.2 Dell documentation 15

2.4 LCN node slot requirements 17

2.5 Experion nodes slot requirement 17

2.5.1 Default configurations for FTE 17

2.5.2 FTE supervisory (Default) 17

2.5.3 Cnet configuration using PCIC interface 18

2.6 Memory configuration for Dell T320 18

2.6.1 4GB, consisting of two 2GB RDIMM for Pre-MLK servers 19

2.6.2 8GB, consisting of four 2GB RDIMM or two 4GB RIDMM for Pre-MLK servers 19

2.6.3 8GB, consisting of two 4GB RIDMM for MLK servers 20

2.7 System specifications 21

2.7.1 Microprocessor 21

2.7.2 Memory 22

2.7.3 Raid controller 22

2.7.4 Optical disk drive 22

2.7.5 Video 22

2.7.6 Network interface 22

2.7.7 Power 22

2.7.8 Environmental 22

- 3 -

2.7.9 Physical – form factor 24

2.7.10 Drive bays 24

2.7.11 Maximum vibration 24

2.7.12 Shock 24

2.7.13 Altitude 25

2.7.14 External peripherals 25

2.7.15 Drives 25

2.7.16 External ports 25

2.7.17 Management 25

2.7.18 Hard disk drive specifications 26

2.7.19 Removable media specifications 26

2.7.20 Storage and media devices 26

2.7.21 Mouse and keyboard 27

2.7.22 Monitor 27

2.7.23 Video cable 27

2.8 Industrial regulatory compliance 27

2.8.1 Electromagnetic Compatibility 27

2.8.2 Safety compliance 28

2.9 Light industrial regulatory compliance 28

2.9.1 Electromagnetic Compatibility 28

2.9.2 Safety compliance 29

Chapter 3 - Installation 30

3.1 Tasks for installing the server 30

3.1.1 Before you begin 30

3.2 Power and grounding requirements 30

3.2.1 Grounding consoles and cabinets 31

3.3 Cabinet spacing requirements 31

3.3.1 Unused cabinet spaces 31

3.4 Installing Dell T320 server and connecting cables 32

3.4.1 Honeywell server back panel connections 32

3.4.2 Installing the server using the fixed rail mounting kit model TP-SPCMF1 34

3.4.3 Installing the server using the slide tray mounting kit model TP-SPCMS1 35

3.4.4 Connecting the cables 37

3.4.5 Install air duct baffles and blank panel front covers in cabinet 38

3.5 Starting the server 40

3.5.1 Turning on the power 40

3.5.2 Configuring RAID in Dell T320 server 41

- 4 -

3.5.3 Starting the TDC emulator services 42

3.5.4 Checking the LCNP4e/LCNP4e2 status 42

Chapter 4 - Operation 43

4.1 Server overview 43

4.1.1 Front view of Dell T320 43

4.1.2 Rear view of Dell T320 44

4.2 Network connections 45

4.2.1 Ethernet network 46

4.2.2 LCN cables 46

4.2.3 LCN network 46

4.2.4 LCN connections 46

4.2.5 MAU connection 47

4.2.6 ControlNet Network 47

4.3 Configuring ControlNet interface card 48

4.3.1 Installing ControlNet card inside Magma chassis 48

Chapter 5 - Servicing 49

5.1 Removing the front bezel 49

5.1.1 To remove the front bezel 49

5.2 Removing the side cover 50

5.2.1 To remove the side cover 50

5.3 Servicing the LCNP4e/LCNP4e2 51

5.3.1 Replacing the LCNP4e/LCNP4e2 board 51

5.4 Servicing the hard disk drives and power supply 53

5.4.1 References 53

5.5 Servicing Honeywell options 54

5.5.1 LCN node slot requirements 54

5.5.2 Slot requirements for General Ethernet and FTE node setup 55

5.6 Adding additional memory 56

5.6.1 Prerequisites 56

5.6.2 To add additional memory 56

5.7 Installing hot spare hard drive 58

5.7.1 To insert the hot spare hard drive 58

5.8 Installing PCIC card in Dell T320 server using Magma 58

5.8.1 To insert the Magma PCIe card 58

5.9 Verifying correct BIOS settings 60

5.9.1 Entering the BIOS 61

- 5 -

5.9.2 BIOS settings for Tab 51155517-100 61

5.9.3 BIOS settings for Tab 51155517-200 66

5.9.4 BIOS settings for Tab 51155517-300 71

5.9.5 BIOS settings for Tab 51155517-400 76

5.9.6 BIOS settings for Tab 51155517-500 83

5.9.7 BIOS settings for Tab 51155517-600 88

5.9.8 Exiting the BIOS 94

5.10 Spare parts 94

5.11 Troubleshooting 95

5.11.1 Integrated Dell Remote Access Controller 6 (iDRAC6) issue 95

- 6 -

ABOUT THIS DOCUMENT

This document contains installation and service information for the Dell PowerEdge T320 server. The

instructions and service information contained here address the server itself, and assumes that the

associated network communication equipment has been pre-installed by the Honeywell factory or has

manuals dedicated to its installation and service. This server is not a standard Dell model and you

cannot order it independently from Dell.

NOTE

If the Local Control Network (LCN) coaxial based system has been integrated with an Experion

Fault Tolerant Ethernet (FTE) based system, the node (server) may be upgraded to be an

Experion Local Control Network (ELCN) node, which has its ELCN Interface provided via FTE.

This node may be installed as a physical or virtual platform.

If the node is upgraded to an ELCN node, and the node is a physical (a.k.a. bare-metal)

platform, a Local Control Network Processor (LCNP) board coaxial interface to LCN is not used.

The LCN MAU is disconnected, and/or the LCNP board is removed.

Redundant ELCN Bridges are required if the ELCN node is communicating with any other

existing, coaxial-based LCN node.

Some LCN nodes may have been replaced by their ELCN equivalent nodes, and overall system

features/architecture will differ from that of a non-ELCN integrated system (classic LCN/TPN

system). In this case it may be necessary to refer to appropriate ELCN documentation, in

addition to the information provided herein.

The following table lists Honeywell ELCN/Experion publications that may be useful for references.

ELCN Reference Documents Table for Server/Workstation PSIG Documents

Publication Content Type

Experion LCN Hardware

Upgrade Kit Instructions

(51195195-415)

UEA installation

Experion LCN Quick Start

Guide (EPDOC-X480-en-

511A)

General hardware/software/migration information

Experion Software Installation

User's Guide (EPDOC-X136-

en-511A)

Experion software installation (various methods)

Experion LCN Overview and

Implementation Guide

Bridge hardware installation, software configuration,

operation, servicing/troubleshooting

- 7 -

CHAPTER

Publication Content Type

(EPDOC-X478-en-511A)

Experion LCN Planning,

Installation, and Service Guide

(HWDOC-X479-en-E)

ELCN system planning, hardware/software

installation, servicing/troubleshooting

Experion LCN Specification

(ELCN03)

General ELCN technical specifications

Fault Tolerant Ethernet

Installation and Service Guide

(EPDOC-XX36-en511A)

FTE system installation, servicing/troubleshooting

Universal Embedded

Appliance Hardware

Installation and Maintenance

Guide (HWDOC-X469-en-A)

General UEA planning, installation, and service

information before it is commissioned as an ELCN

appliance.

Integrated Experion-TPS

User's Guide (EPDOC-XX66-

en-511A)

Supplementary installation tasks needed before

using TPS Nodes on an Experion system. Describes

configuration tasks needed for TPS Nodes.

Virtualization Planning and

Implementation Guide

(EPDOC-X147-en-A)

Implementing networks, Preparing ESXi host,

Administering virtualization

Server and Client Planning

Guide (EPDOC-X128-en-

511A)

High-level planning/design for Experion servers,

clients, controllers

Process Operations Manual

(SW11-601)

Process operations, alarm/message handling,

reporting, history functions, system operations,

system menu functions, console/station peripheral

devices

Integrated Experion-TPS

User's Guide (EPDOC-XX66-

en-511A)

Supplementary installation and configuration tasks

for Experion TPS Nodes

Experion PKS R511.1

Migration Planning Guide

(EPDOC-XX70-en-511A)

Planning information for migration of Experion

system from legacy R4xx system software to

Experion R511.1 software.

Switch Configuration Tool

User's Guide

(EPDOC-X246-en-511A)

Experion switch configuration information

- 8 -

Chapter 1 - About this Document

Publication Content Type

Experion Network Best

Practices (WP-07-02-ENG)

Best practices for planning the installation of Experion

FTE networks, and connecting them into plant IT

networks.

Experion R511 Software

Change Notice (EPDOC-

X166-en-511A)

Describes Experion R511 features/enhancements,

overall product, release interoperabilities, system

dependencies, problem resolutions, known issues,

special considerations

Customer Release Guide

R687 (CRG-687)

TPN/TPS Migration information (ELCN migration

Information included)

TPN R687 Software Change

Notice (TNDOC-X166-en-

6871A)

Document changes, compatibility and

migration/installation processes for the TPS Process

Network Release of R687 software.

Experion Control Building

User's Guide (EPDOC-XX19-

en-511A)

Procedures for basic tasks in the Control Builder

application (configuring hardware devices,

continuous control strategies, sequential control

strategies).

1.1 Revision history

Version Date Description

August 2020

Initial release of the document.

- 9 -

PLANNING

lOverview

lDescription

lPlatform information

lLCN node slot requirements

lExperion nodes slot requirement

lMemory configuration for Dell T320

lSystem specifications

lIndustrial regulatory compliance

lLight industrial regulatory compliance

2.1 Overview

Platforms sold by Honeywell are engineered for the process control mission of Experion and TPS

systems to provide consistent and robust performance. Through an extensive qualification process,

Honeywell defines specific peripheral devices, slot locations, and BIOS settings for best performance

and reliability, sometimes even adding cooling fans for longer service. Honeywell platforms are then

built to Honeywell specifications by the computer manufacturer.

Honeywell engineering has tested the Dell PowerEdge T320 server with other Honeywell hardware

and software and has qualified its use for specific configuration items as identified in the Software

Change Notice (SCN). The server is not a standard Dell model and cannot be ordered independently

from Dell. The Technical Assistance Center (TAC) is well trained and supports Honeywell platforms.

Use of any other server including a similar Dell model, is considered a project special and its TAC

support is limited according to the services policy.

The Dell PowerEdge T320 server are shipped with the following Tab numbers. The CPU and memory

configurations varies for each Tab number.

lDell PowerEdge T320 Standard (Tab 100)

lDell PowerEdge T320 Standard RAID (Tab 200)

lDell PowerEdge T320 Performance (Tab 300)

lDell PowerEdge T320 MLK (Mid-Life Kicker) Standard (Tab 400)

lDell PowerEdge T320 MLK Standard RAID 5 (Tab 500)

lDell PowerEdge T320 MLK Performance RAID 5 (Tab 600)

The Honeywell-based Dell PowerEdge T320 server provides the functionality of a server-based PC

running the Microsoft Windows server operating systems.

The release of this server is based upon RAID-5 and dual power supply design to provide computer-

based functionality for certain Experion systems and the TPS systems.

lSoftware requirement

lBIOS configuration

- 10 -

CHAPTER

Inhaltsverzeichnis

Andere Honeywell Server Handbücher

Honeywell

Honeywell T610 Technisches Handbuch

Honeywell

Honeywell MZ-PCSV74 Technisches Handbuch

Honeywell

Honeywell Aquatrol W964F Bedienungsanleitung

Honeywell

Honeywell XYR301E Bedienungsanleitung

Honeywell

Honeywell HAS-QNH Bedienungsanleitung

Honeywell

Honeywell PE SC1430 Technisches Handbuch

Honeywell

Honeywell Uniformance R300 Bedienungsanleitung

Honeywell

Honeywell XYR3011 Bedienungsanleitung

Honeywell

Honeywell LANSRLU1 Einrichtungshandbuch

Honeywell

Honeywell HUS-D4-E-Pro Bedienungsanleitung

Honeywell

Honeywell Q7055B1047 Bedienungsanleitung

Honeywell

Honeywell AutomationServer Bedienungsanleitung

Honeywell

Honeywell HP ProLiant DL360P Gen8 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung