Honeywell Compact asd Bedienungsanleitung

Compact unit_HON.doc 07/2011 1/5

Installation Instructions for

Honeywell COMPACT Air Sampling Smoke Detection System

Abb.:A

Fig.: A

1 Connection terminals

2 Connection pipe system

3 Filter element

4 Connection for air return

5 Pre-punched cable entries

Installation of the device

General information:

- When mounting the device basis make sure the displays of the aspirating smoke detection system are clearly visible.

- The air outlet of the device basis must not be blocked (the distance between the air outlet and adjacent objects (e.g. wall) is to be at least 10 cm).

- The device basis can be mounted with the aspiration pointing upwards or downwards. The connection for the air sampling pipe is marked with a

“V” (see fig. A). If the aspiration comes from downwards, make sure no impurities enter the air outlet which then points upwards.

Procedure:

1. First, clearly mark the fixing points for mounting the device basis at its position. If necessary, use the provided drilling jig.

2. Fix the device basis by means of four screws (max. ∅of 4mm) safe to the underground. Make sure the device is not fixed under mechanical

tension and the screws are not tightened too much.

Compact unit_HON.doc 07/2011 2/5

Notes:

- For the fixing of the device basis only use installation material that is suitable for the on-site installation and that ensures a safe and durable fixing.

- When fixing the device basis, attention has to be paid to the marking for the connection of the pipe system (see fig. A).

3. Open the necessary pre-punched cable entries in the device basis (max. 8 x M20 and 6 x M25). If necessary, use a screwdriver.

4. Carefully equip the cable entry/entries with M20 or M25 cable entries (2 x M25, 1 x M20 included in the delivery) by inserting them into the corre-

sponding cable entries.

5. Insert the required connection cable(s) (max. 2,5 mm2) into the prepared cable entries and wire the devices according to the circuit connections

described at the following page.

Note:

If the detection unit of Honeywell COMPACT is to be installed at a later stage, the mounted device basis can be protected against excessive con-

tamination by using the bottom of the supplied card box.

In order to use the bottom of the card box as a dust protection, please proceed as follows:

1. Carefully separate the cover along the pre-punched perforation from the bottom of the carton.

2. Open the required openings for the connections of the pipe system, the air return and the cable entries by separating the openings carefully along

the pre-punched perforation from the bottom of the card box.

3. Put the bottom of the card box as protection over the mounted device basis.

Compact unit_HON.doc 07/2011 3/5

Connections for

Honeywell COMPACT ASD

Inputs

1a +24 V= Supply voltage

2a 0 V = Supply voltage

3a + Line connection “fire alarm”

4a - Line connection “fire alarm” (and termination element line “fire alarm”)

5a + Line connection “fault”

6a - Line connection “fault”

7a + 24 V= Reset

8a 0 V = Reset

Outputs

1b +24 V= Supply voltage

2b 0 V = Supply voltage

3b Alarm element line “fire alarm”

4b Alarm element line “fire alarm”

5b Termination element line “fault”

6b Termination element line “fault”

7b Data bus A

8b Data bus B

(connection for accessories)

+24V=

0V= -

Data bus

+24V=

0V=

Data B

Data A

L1 +

L1 -

L1 +

L1 -

Reset

Data

24V=

++24V=

0V=

Alarm element=

Termination element=

Elements are dependent on the connected fire panel

Fig.:

Alarm relais

Fault relais

internal connection detection unit

Compact unit_HON.doc 07/2011 4/5

Conformity certification pursuant to EU Construction Products Directive 89/106/EEC

•The conformity of the air sampling smoke detector for fire detection and fire alarm systems in buildings according to DIN EN 54-20 has been

established by a test at the VdS laboratory.

•The EC certificate of conformity has been issued by notified product certification body (ID no. 0786, VdS).

•The CE designation according to DIN EN 54-20 has been carried out.

0786

WAGNER Group GmbH

Schleswigstrasse 1 - 5 30853 Langenhagen

Nr. 0786 – CPD – 20322

EN 54-20: 2006

Air sampling smoke detector for fire detection

and fire alarm systems in buildings

0,1 % light obscuration/m

Class: A, B and C

0,5 % light obscuration/m

Class: A, B and C

Honeywell Life Safety Systems

140 Waterside Road

Hamilton Industrial Park

Leicester

LE5 1TN

Tel (+44) 116 246 2000

Inhaltsverzeichnis

Andere Honeywell Rauchmelder Handbücher

Honeywell

Honeywell Notifier VESDA-E VEA Series Bedienungsanleitung

Honeywell

Honeywell FS10-R Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms BEAM355A Bedienungsanleitung

Honeywell

Honeywell NOTIFIER FSP-951T-SELFT Bedienungsanleitung

Honeywell

Honeywell Notifier NBG-12LX Bedienungsanleitung

Honeywell

Honeywell Lyric Bedienungsanleitung

Honeywell

Honeywell MORLEY-IAS MI-LPB2-S2I Bedienungsanleitung

Honeywell

Honeywell Notifier FDU-80 Bedienungsanleitung

Honeywell

Honeywell DFS8MS Bedienungsanleitung

Honeywell

Honeywell HI-SPEC Bedienungsanleitung

Honeywell

Honeywell C8600A Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms SD365R Bedienungsanleitung

Honeywell

Honeywell Silent Knight SD505 Bedienungsanleitung

Honeywell

Honeywell FireLite BEAM355 Bedienungsanleitung

Honeywell

Honeywell SiXCOMBO Bedienungsanleitung

Honeywell

Honeywell GENT Venturi-Air Duct Kit Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms D350RPL Bedienungsanleitung

Honeywell

Honeywell DFS8MS Bedienungsanleitung

Honeywell

Honeywell TC846A1005 Bedienungsanleitung

Honeywell

Honeywell Velociti 3 Series Bedienungsanleitung

Honeywell

Honeywell FIre LIte ALarms D350PL Bedienungsanleitung

Honeywell

Honeywell Gamewell 1415 Bedienungsanleitung

Honeywell

Honeywell FCI 1400 Bedienungsanleitung

Honeywell

Honeywell FCI 2451 Series Bedienungsanleitung

Beliebte Rauchmelder Handbücher anderer Marken

x-sense

x-sense SD19-W Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

teko

teko Astra-42A Bedienungsanleitung

Siemens

Siemens PE-11C Bedienungsanleitung

System Sensor

System Sensor DH500ACDC Bedienungsanleitung

Resolution Products

Resolution Products RE612 CryptiX Bedienungsanleitung

First Alert

First Alert PC900V Bedienungsanleitung

Eminent

Eminent EM6590 E-Domotica Bedienungsanleitung

Ei Electronics

Ei Electronics Ei Ei168RC Bedienungsanleitung

Carrier

Carrier Kidde Quell Q301 Bedienungsanleitung

VESDA

VESDA VLF-500 Bedienungsanleitung

ELRO

ELRO FS8110 Bedienungsanleitung

Heiman

Heiman SMOKI NS-626PHS Bedienungsanleitung

Family Gard

Family Gard FG225 Bedienungsanleitung

Regin

Regin SDD-S65 Bedienungsanleitung

Aparton

Aparton ASD-10 Bedienungsanleitung

Greystone

Greystone DSD120 Bedienungsanleitung

LST

LST ÜMS-55000-841 Bedienungsanleitung

Honeywell compact asd Bedienungsanleitung

Beliebte Rauchmelder Handbücher anderer Marken