Honeywell FCI 1400 Bedienungsanleitung

1400

System Sensor

Ionization Smoke Detector

Features

• Unique dual unipolar sensor provides exceptional

stability.

• Built-in tamper-resistant feature.

• Built-in test switch.

• Built-in visual alarm indicator.

• Remote LED option.

• Compatible with FCI control panels.

• Field metering of detector sensitivity.

• Removable insect screen and cover for field

cleaning.

• Sealed against dirt, insects, and back pressure.

• Insect-resistant screening (.020"/.508mm

openings).

• Convenient terminal strip wiring.

GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118

Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.

Description

The System Sensor 1400 dual-chamber ionization smoke

detector is specifically designed to meet the performance

requirements of fire detection/alarm systems. This detec-

tor uses a state-of-the-art unipolar sensing chamber. The

detector is designed to provide open area detection and is

compatible with FCI fire alarm control panels. The detec-

tor operation and sensitivity can be tested in place.

The detector has an LED which flashes every ten seconds

indicating that power is being applied to the detector. The

LED lights steadily when the detector is in alarm. A re-

mote LED annunciator is available as an optional acces-

sory.

The 1400 detector includes a tamper-resistant feature

that, when used, prevents removal of the detector without

the use of a tool.

Sensitivity testing is performed by inserting a tool into the

recessed test switch opening.

Field metering of detector sensitivity may be performed

with the aid of a voltmeter and test kit MOD 400R.

Specifications

Nominal sensitivity 1.5%/ft. obscuration

Operating voltage 8.5 - 35 VDC (24 VDC nominal)

Standby current 100 µA maximum

Operating

temperature

32°to 120°F (0°to 49°C)

Operating humidity 10 % - 93 % relative humidity

Air velocity 1,200 ft. per minute maximum

Altitude 10,000 feet

Construction Off-white flame retardant plastic

Diameter 5.5 inches (14 cm)

Height 3.12 inches (8.0 cm)

Weight 0.7 lb (310 gm)

Note: Alarm current is limited by the control panel initiating

device circuit.

Part Number

1400

Ordering Information

Description

Ionization detector

1400

An ISO 9001-2000 Company

WARNING: To prevent detector contamination dur-

ing construction, smoke detectors must be protected

from dust and contamination until area is clean and

dust free. See NFPA 72-5-3.7.1.3.

Mounting

•On a 4-inch square box with plaster ring and FCI

supplied mounting bracket kit. Minimum depth 1.5

inches.

•On a 3.5 or 4-inch octagonal box.

Minimum depth 1.5 inches.

•Directly to ceiling using plastic screw anchors.

Refer to N.F.P.A. 72, Chapter 2-3. “Smoke Sensing Fire

Detectors” for spacing, location of detectors and other

guidelines.

Installation

Line up the arrows on the detector with the arrows on the

mounting bracket. Turn the detector clockwise until the

detector clicks into place.

To use the tamper-proof feature, break the smaller tab at

the scribed line in the tamper-proof tab located on the

detector mounting bracket. Install the detector. To remove

the detector from the bracket when using the tamper-proof

feature, insert the blade of a small screwdriver into the

hole on the side of the base and push the plastic lever

away from the detector head. Turn the detector counter-

clockwise for removal. NOTE: The decorative ring must

be removed in order to remove a head after it has been

made tamper-proof.

NOTE: The number of two-wire smoke detectors which

can be accommodated per zone varies with different con-

trol panels. Consult the control panel instruction manual to

determine the capacity.

Testing

Detectors may be tested in the following ways:

•A. Insert a tool into the test opening in the unit. For the

complete procedure, refer to the Installation and Main-

tenance Instructions furnished with each detector.

•B. Field metering of detector sensitivity may be per-

formed with the aid of a voltmeter and test kit MOD

400R. For the complete procedure, refer to the Installa-

tion and Maintenance Instructions furnished with each

detector.

Maintenance

Cleaning programs should be adapted to the individual

environment in conformance with NFPA Standard 72. We

recommend, at the least, an annual cleaning of the unit.

The detector screen and cover assembly can be removed,

revealing the sensing chamber. A vacuum cleaner can be

used to remove dust from the screen, cover and sensing

chamber. For the complete procedure, refer to the Instal-

lation and Maintenance instructions furnished with each

detector.

GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118

www.gamewell-fci.com 9020-0586 Rev. B page 2 of 2

Views Showing Position of Test Magnet

Andere Honeywell Rauchmelder Handbücher

Honeywell

Honeywell Fire-Lite Alarms D350RPL Bedienungsanleitung

Honeywell

Honeywell TC846A1005 Bedienungsanleitung

Honeywell

Honeywell FAAST LT Bedienungsanleitung

Honeywell

Honeywell TC842B1007 Bedienungsanleitung

Honeywell

Honeywell HI-SPEC Bedienungsanleitung

Honeywell

Honeywell FCI 2451 Series Bedienungsanleitung

Honeywell

Honeywell 5800COMBO-CN Bedienungsanleitung

Honeywell

Honeywell GasAlertMicro 5 Bedienungsanleitung

Honeywell

Honeywell SS4-A2 Bedienungsanleitung

Honeywell

Honeywell SS4-AI Bedienungsanleitung

Honeywell

Honeywell FCI 2151 Bedienungsanleitung

Honeywell

Honeywell Xtralis FAAST FLEX FLX-010 Bedienungsanleitung

Honeywell

Honeywell Notifier VESDA-E VEA Series Bedienungsanleitung

Honeywell

Honeywell DFS8MS Bedienungsanleitung

Honeywell

Honeywell Photoelectronic Smoke/Temperature Detector... Montageanleitung

Honeywell

Honeywell LT-200 MI-FL20 Series Bedienungsanleitung

Honeywell

Honeywell 5806W3 Montageanleitung

Honeywell

Honeywell TC842B1007AE Bedienungsanleitung

Honeywell

Honeywell 5800COMBO Montageanleitung

Honeywell

Honeywell SS4-A HART Bedienungsanleitung

Honeywell

Honeywell SS4-AS Bedienungsanleitung

Honeywell

Honeywell Notifier NBG-12LX Bedienungsanleitung

Honeywell

Honeywell NOTIFIER FSP-951T-SELFT Bedienungsanleitung

Honeywell

Honeywell DFS8MS Bedienungsanleitung

Beliebte Rauchmelder Handbücher anderer Marken

x-sense

x-sense SD19-W Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

teko

teko Astra-42A Bedienungsanleitung

Siemens

Siemens PE-11C Bedienungsanleitung

System Sensor

System Sensor DH500ACDC Bedienungsanleitung

Resolution Products

Resolution Products RE612 CryptiX Bedienungsanleitung

First Alert

First Alert PC900V Bedienungsanleitung

Eminent

Eminent EM6590 E-Domotica Bedienungsanleitung

Ei Electronics

Ei Electronics Ei Ei168RC Bedienungsanleitung

Carrier

Carrier Kidde Quell Q301 Bedienungsanleitung

VESDA

VESDA VLF-500 Bedienungsanleitung

ELRO

ELRO FS8110 Bedienungsanleitung

Heiman

Heiman SMOKI NS-626PHS Bedienungsanleitung

Family Gard

Family Gard FG225 Bedienungsanleitung

Regin

Regin SDD-S65 Bedienungsanleitung

Aparton

Aparton ASD-10 Bedienungsanleitung

Greystone

Greystone DSD120 Bedienungsanleitung

LST

LST ÜMS-55000-841 Bedienungsanleitung